Electric warm plinth: Installation and operation

In an effort to make your home cozy and comfortable, we use a variety of new items. One of these innovations, which is actively used by lovers of contemporary interiors - electric floor plinth. Due to the high thermal efficiency and cost-effectiveness of such a heat, its use is justified. In this regard, consider the features of the installation, as well as the main advantages of warm baseboards.

Electric warm plinth: design features

Despite the fact that you could have 20 years ago the western market to buy warm electric baseboard, for the Russian market is still a novelty. And to his surprise, she did not immediately gained great popularity, despite the convenience and economy of use, as to abandon the traditional heating systems are ready to provide a few. In fact, this is one of the most efficient heating devices, which only can be found today.

It is worth noting that there is not only electric, but radiant baseboard, which also has certain advantages. But speaking about the use of country houses in the country, as a rule, preference is given to it an electric model, since it is the only form of energy that is available almost everywhere.

Often, heating is carried out and by means of a liquid or solid fuel. However, this option is hardly a cost-effective, and efforts are required for the storage of fuel and maintenance of the equipment, much more. Much easier to use as an energy source of electricity, the more that the installation of such a system is not particularly difficult.

Regardless of whether it is electric or water appliance apparently they have the same structure: the aluminum strip having a width of 3 cm. In this case its height can be very different, from 10 to 24 cm. Color and shape can also be anything.

The main difference between the electric device from water lies within. If in the second case it is a tubular structure over which ribs planted, the electric baseboard - a standard heater or a tubular heater. Having a fairly large length of the tube, which occupies the entire interior space heater, it provides a great space with warmth.

Important is the fact that for the production of heaters uses a special heat-resistant alloy that provides extremely long service life of the device.

The operating principle of the electric warm plinth

According to the principle of the electric baseboard does not differ from the underfloor heating system, which are frequently used in private homes. That is in addition to the heating element there is also a thermostat, which is responsible for regulation of the set temperature.

For temperature control, in turn, meet the thermal sensors, which are mounted on the wall (a little above the middle of adult height). You can connect a plinth to the normal outlet, however, according to experts, it is better to use for this purpose a separate cable branch, having it from the electrical panel and optionally install it on the machine.

The choice of thermostats, which is ready to offer the buyer the modern market, more than great. And here it is necessary to focus both on the functionality of the device and its cost. Of course, at the most feature-rich and sophisticated devices price will be much higher than that of simple models.

The most popular are the models that perform all the necessary tasks automatically, without human intervention. Many automated systems of this type make it possible not only to exhibit the desired temperature, but also pre-programmed modes for a few days in advance.

The main advantages of warm baseboards

Work warm electric baseboard is based on a few fundamental principles that are at the same time the advantages of this system:

1. Electric baseboard attached to the wall around the perimeter of the room at the traditional site of the installation of the decorative element.
2. Heated, a heating appliance gives off heat not only the air in the room, but also directly to the walls, with which it comes into contact. Thus, heat losses are reduced significantly.
3. The thermal energy received from the plinthIt is distributed evenly from floor to ceiling. This occurs by reducing the convection of air in the room.
4. Slowly rising from the plinth warm air does not raise dust from the floor, which also plays a significant role.
5. The temperature plinth can be adjusted in the range from 40 to 70 ° C. Thus, you can select the most comfortable temperature for that weather, which is typical for a particular season or day.

According to users, the use of such heating element, temperature the room just will not fall below 20 ° C, and it can be considered favorable conditions for residence.

Another important point - when compared with other electric heaters, baseboards consume significantly less power. How indicators argue for the production of the same amount of heat, the plinth is required 30% less energy than a conventional heater. And this is no small savings when heating is included throughout the day.

An important question often asked by consumers before purchase warm plinth - whether there are any restrictions on the installation of such an element. In fact, no actual limitations not. Establish such a plinth can be absolutely any room. As for the compliance of the decorative elements of the interior, here the choice is so great that you will be able to choose the appropriate option easily.

Useful advice! Warm baseboards - an ideal solution for rooms with panoramic windows, as set standard radiators under such windows is impossible, but the electric baseboard easily solve this problem and thus complement interior.

How to install a plinth on the floor: the installation of their own hands

Compared with the installation of any floor heating system, installation of warm skirting does not require too much construction work. Install the plinth you can own, and this is done quite easily. Due to the low weight of such heating devices are easily mounted to drywall or any other partitions, and you can not be afraid for his fixation.

The main thing that you need in the course of work - hammer and the ability to use it. By purchasing a plinth, complete you get the screws and brackets, which will produce and mount.

Useful advice!If you wish to arrange an electric skirting only part of the room and not the whole of its perimeter, the other zones can put an ordinary decorative moldings that seemingly will look the same as warm.

Installing such a heating element is not made close to the floor surface, and with some clearance, about 1 cm. The distance from the wall should be about 15 mm to provide a convection device and prevent overheating.

The sequence of installation works

In order to fix the electric baseboard first need to measure the correct height relative to the floor. Mark it with a simple pencil on the wall. Then, putting on a horizontal layout baseboard to the wall, determine the place where in the future there should be holes for fasteners. Also, mark them with a pencil. Then, in the marked points drill holes using a punch and insert plugs that are included. Next screw panel using screws.

Then you need to hang on her two arms, which will be installed heating element. All you have to do after installation - connect your device to the network, not forgetting the thermostat sensors and temperature. When all the elements are connected, the whole interior is covered with the decorative aluminum panel.

As can be seen, no special difficulties the installation process does not cause a warm plinth. There are only two nuances that must be considered in the process:

• to skirting looked aesthetically pleasing, all panels must be installed at the same level;

• when it comes to the installation of warm plinth in a sufficiently large area of ​​the room, and the number of panels to be connected, more than 17 pieces, you need to use multiple blocks. This is primarily due to the fact that the total capacity of the panels, connected to one unit, must not exceed 200 watts. Moreover, in case of using several blocks need to connect them separately and in parallel.

Perform calculations, based on the index of thermal impact each element. Due to the fact that the power of the instrument may be different, the same formula to calculate the non-existent, and only what you can be used as a basis - 1 kW of heat energy corresponds to a 10 m² floor surface, which will be warm. However, there is an exception - this ratio is only true if the ceiling height in the room does not exceed 2.8 m.

Useful advice! If you do not want to mount your own, you can invite a professional to he carried out the calculations and the installation of the baseboards. Price for meter installation in this case will be about 1000-1200 rubles.

Setting the thermostat for warm electric baseboard

Before you mount the plinth to the floor, you need to take care of the thermostat. Its installation also has its own nuances that must be considered during installation: it should be located at an altitude of about 1.2-1.5 m in free from furniture and decor section of the wall.

Related article:

Temperature controllers with air temperature sensor

The principle of operation thermostat with temperature control. The main function of the thermostat. Forms and types of thermostats.

Installation is performed as follows: the rear panel of the device puts the wall and through the mounting holes are made in locations corresponding tagging mounting with a pencil or marker. Then holes are drilled, into which will fit dowel diameter of 6 mm. Fixed dowels, and then by means of screws attached thereto the device.

After that you need to connect all the cables that run from the unit to the plinth, a temperature sensor, and a power source, that is, the wall outlet. All that is left to do after that - set top skirt panel and check serviceability of the system in all modes.

It is also worth thinking about what type of packing you want to use: open or closed. The second option is possible in the case where the installation of skirting heating is carried out in parallel with the rest of the repairs in the room. In this case, it makes sense to try to hide all the cables in the wall. Otherwise, use special boxes designed for laying cables on top of the wall.

Useful advice!Pay attention to the section of the cable, which you choose to connect to mains - it is recommended that it be at least 2.5 cm², if you need to connect once a unit panels.

In addition, you can use as a reference the information provided by the manufacturer on the packaging. If you purchase a trusted manufacturer plinth, complete details will always go Instructions for installation and connection, so to carry out all the necessary work on their own will not be labor.

As for testing the newly connected device, then this should be given some time. Provide instrument able to work in all temperature conditions for some time. This allows you to verify the health of the system. At the same time continuous monitoring, so that in case of occurrence of any trouble you can take appropriate action.

Also, always make sure that the temperature regulators react accordingly to achieve a certain temperature and automatically shut off heating system.

Warm electric baseboard: experts and users reviews

Read reviews of experts on environmental and safety of the heating device, you make sure that it is completely safe for health and environmental ecology. Furthermore, such moldings creates a barrier to cold air masses that move away from the window. Also, a positive factor is that due to the heating of the walls in the room will not be humid.

At the same time, the fact is often mentioned in reviews of users that by slowly raising the air and dust in the room becomes much smaller, which has a positive effect on health. Celebrating and effectiveness of these devices, claiming that they are able to completely replace the traditional methods of heating in the rooms. This suggests that at the proper power for a particular room heating method can actually be used as the primary.

Due to the heating module, which has a unique structure, as well as use of the reservoir to connect, the temperature difference between flow and return line is not more than 5 degrees. If we compare this figure with the data of traditional heating systems, we can see that this is 4 times less than usual. And this difference provides significant savings in electricity costs.

Also, users have reported the fact that this method of heating saves space significantly, because the baseboard does not take place at the same time to fully act as radiators. Thus, furnished a similar system in a small apartment, you can save money at the same time, the space and still provide the warmth.

Electric Infrared warm plinth - a heat source that heats the room perfectly and does not dry the air. With all this, it is absolutely safe to use and in contact with any of the materials, fabrics and upholstery furniture will not cause a fire.

Electric warm plinth: the price of the product and installation

We can not say that the electric floor plinth - a cheap pleasure. The minimum cost of such an article would be about 12.5 thousand. rubles. And it provided that the heat output will be only 500W, and the area, which will cover a plinth, is no more than 8 square meters.

More powerful and high-quality versions of the plinth will cost you about 20-25 thousand. rubles. However, their capacity is already 1000W, and will cover an area of ​​15 m².

Useful advice! When choosing warm skirting the main landmark - the area of ​​the heated room. Do not take too powerful product for small premises, as well as save in the case of finishing a large room.

If you are still unsure whether or not to acquire such an unusual heating system, it is useful to look at the prices, reviews. Electric warm plinth - a new and modern product, the use of which has been widely discussed, that will allow you to get detailed information about all of its properties and characteristics.

Summarizing, we can say that, according to many reviews, price very warm electric baseboards low, given all its positive characteristics, and the ability to fully replace the traditional systems heating. In addition, such an element will fit perfectly into any interior, as the color, shape and texture of the casing can be completely arbitrary, and are selected solely on the basis of your personal preferences.