Pump Kid: technical specifications and features

The main advantage of the vibratory pump Kid is the ease and convenience of operation

Scope pump

Using a pump Malyshok possible for a wide range of applications, this equipment is used in the garden plots, at the farm, on farmland and country houses. Given the versatility of the pump, it can be used with the following objectives:

• device irrigation and irrigation system in the garden area, irrigation and watering fields landings furthermore equipment can be effectively used for pumping water from an artificial pond, or, on the contrary, it filling;
• pumping water from a well or a well in the water system or special containers via the pump can easily provide all the water intake point on a country average size portion;
• pumping water from basements and utility rooms in the event of flooding. The compact size, ease of installation and operation of equipment are perfectly suited for these purposes.

Submersible pump vibration The kid is in great demand in the market - this is one of the best value for money

Depending on the specific use, you can choose pump Kid with lower water intake or with the upper. Variant of the lower wall is more effective when used in wells or wells with a diameter of more than 100 mm. As such equipment is well suited for pumping water from a small tank, that is useful in case of flooding of premises or pumping water from the lowlands. Lower fence Minus - high risk of dirt and various fine particles, so the input equipment hole with bottom wall is recommended to install filter.

The pump with the upper fence, not only does not allow debris to get inside, but also characterized by a more efficient cooling and almost not afraid of overheating. Such a pump can be safely left unattended operating, it can be used to ensure continuous operation of the autonomous supply system. Also, this type of equipment is used for lifting water from boreholes and wells.

Useful advice! Choosing a pump for the country site, or gardening services, pay attention to the purity of the water, which will use the equipment you need. For contaminated water bodies and reservoirs is better to buy a model with an upper wall, in order to avoid the risk of accidental breakage.

The principle of operation of the pump Kid with the upper wall of water in the reservoir 1 - pump 2 - protective ring 3 - clamp 4 - a cable (cord) caproic, 5 - ligament 6 - hose 7 - power cord 8 - resilient suspension 9 - a crossbeam

The principle of operation of the pump Kid

Like any other vibration pump, Kid is working on the principle of inert - which means that in his case there is a vibrator that gives a liquid oscillating movements. Vibrator represents the anchor to which the rod is attached. When the pump is plugged in, the anchor is attracted to a magnet, the magnet is then turned off, and a special spring returns the armature to the rod to its original position. Such fluctuations occur about 50 times per second.

The characteristics of the pump Kid seen that such a simple construction, can nevertheless provide a sufficiently high fluid pressure in the water system.

What parameters to consider when choosing

With a relatively low price, the technical characteristics of the submersible pump Kid fully satisfy the needs of the modern user:

• Operating voltage - 220W;
• Performance - 432 l / s;
• the presence of the upper and lower openings for water intake;
• operating depth - 40 m;
• Power - 245 Watts.

Variety of pump models Kid

Price pump water Kid ranges from 1000 to 2000 rubles, while it has a good performance, which allowed him to gain trust among users. In modern versions additionally installed built-in automatic protection system. Automation protects the pump overheating due to dry running, and allows the engine to respond quickly to surges in the network. It is very important for the suburban areas, which can not always boast of a stable electricity supply.

Automation water pump Tiny mechanism turns off the power at a low water level in the tank. Level is determined by means of the float system. When raising the water to a certain level of the pump motor is started again. The protection system is powered by the same power source as the pump itself.

It should also be understood that in today's market of pumping equipment are a few modifications of the unit.

Examples immersion pump Kid with upper and lower water intake in well or well

Classic Kid pump

The peculiarity of this model is that it is designed to supply water for a long distance. Classic Kid efficiently pumps water at 100-150 meters, so often used for irrigation of large suburban areas. The value for the pump hose diameter kid - 18-22 mm.

This model was not designed to operate in a contaminated environment allowable concentration of impurities shall not exceed 0.01%. There is also a requirement to the temperature of the pumped water - no higher than 35 ° C.

The base model is not equipped with thermal overload protection, filter and pressure switch. And if the filter you can still set their own, without the rest of the modifications have to do. Of course, all this has a direct impact on the price of the unit, because it is much lower than that of other models. Base model can be immersed to a maximum of 5 m, and the water intake is via the bottom valve.

Table Performance pumps Kid

Pump Kid-M

This model in its technical characteristics is practically no different from the classic, except that the water intake through the upper valve. Therefore, this modification to the pump wells Kid recommended where impossible bottom fence, high bottom pollution reasons.

Related article:

Pumping station for a private home: water suburban area. The choice of equipment, performance and installation. Advantages and disadvantages of systems. Review of the best producers.

Kid-K

It has the same characteristics as the basic model, but boasts a built-in protection against overheating. Such a model can be effectively used for long continuous unattended operation.

Apparatus nansosov "Tiny-M" and "Tiny-K 'with the upper water intake

Kid-Z

Submersible pump for wells Kid-3 is the most relevant for use in small wells. It is characterized by slightly more expensive than the base model, but it boasts a significant structural differences:

1. The pump itself and an electric motor enclosed in a sealed monolithic block, which eliminates ingestion of water.
2. Rated operation power is lower than the base model, and is only 165 watts. It is enough to work in a small hole.
3. Unit gives 0.432 m³ / h with a head of 20 m.
4. the device weighs less than 3 kg.

Also, the pump of this model has a compact size, and bundled it has water-proof cable. Water filter the base not supplied, but it can be easily purchased and installed in the home.

Useful advice! When choosing a pump model kid, consider the characteristics of the tank, which you plan to use it. Sometimes it is enough to buy the simplest basic model, and sometimes it is better to buy an option with integrated modifications.

Power Kid vibratory pump, depending on the model, varies from 185 to 240 kW

Rules of operation of the pump

It is logical that most of the pumping equipment is used in difficult conditions. Because of this significantly increases the risk of breakdowns, which can reduce, if you observe a number of basic rules of operation and time to carry out preventive repairs.

Most often, the equipment fails due to debris particles entering the mechanism. Also with time may occur clogging of the tubes, deleting items, sludge formation on the walls of the inlet and outlet openings. The best method of dealing with the clogging of the pump - is the installation of special filters for pump Kid. They retain solid particles and do not allow them to penetrate into the mechanism. It is considered the best one filter EFVP-Cm-38-125. It not only prevents the penetration of the pump mechanism of particle size up to 150 microns, but is easy to install.

Useful advice! Do not assume that the filter does not need to pump the Kid with the upper wall of water. Garbage in the mechanism can get not only from the bottom of the tank, but just out of the water, so the installation filter It would be superfluous for any model.

The pump assembly "Babe" to the bottom wall of water

Financial expenses for purchase and installation of the filter will be about $ 100. Such measures significantly extend the service life of equipment and improve the efficiency of use, and provide you with clean water from any water body.

Installation and connection equipment

Before proceeding with the installation of pumping equipment, should be specific to different models:

1. When mounting the pump to the well equipment is to be secured Kid not less than 1 m from the bottom of the tank. So you will minimize the ingress of debris in the bottom of the mechanism.
2. Technique with the valve in the upper part can be installed on the bottom of the tank, since such a device eliminates the ingress of debris from the bottom.

In order to reduce the number of vibrations of the working mechanism, it is necessary to fix one end of a durable nylon cord in a special hole on the housing pump, to the other end, attach a special elastic suspension, as that can be a medical tourniquet or elastic rubber hose.

Kid Pumps are available with aluminum or plastic housing version

When working in a confined space such as a well or borehole, a pump may beat against the wall of the tank, leading to premature failure. In order to avoid this, it is recommended to put the housing wide ring of dense rubber, which will serve as a shock absorber during impacts.

Remember that you need to install the necessary equipment in the vertical position, the horizontal installation can lead to premature failures. unit immersion depth should be greater than the lower index of the dynamic water level. Before you install a submersible pump for well kid should make preparations work, that is, to determine the depth of the position of the pump in the tank and acquire the appropriate hose diameter. It is important that the hose diameter suited to the device, then it can work as efficiently as possible.

Mismatch hose sections and the inlet opening of the pump may lead to overloading and premature wear of the components. In no case can not be connected to the mains during installation, it can be done only after all installation work is finished. If the electric cable is too short, it can be extended, but the connection point must necessarily be outside of the well.

pump electrical connection is made only after completion of all installation work

Features of repair of the pump kid with his own hands

The need for pump repair Kid most likely to occur due to the fact that the mechanism of the water falls debris and silt formed. Therefore, to extend the life of the equipment, it must be regularly disassembled and cleaned. Video pump repair Kid own hands can be easily found on the Internet. It demonstrates that the repair is carried out in the following sequence:

• before starting to disassemble the pump for the water to give Baby, should be placed on the housing notches, which will mark the relative position of the parts. This will facilitate the assembly after repair;
• must then in turn weaken each of the screws which interconnect the housing part. Conventional screws can be replaced in the assembly bolts with diagonal slits on the screws or allen key. In order to loosen the screws have been easier, the housing can be compressed in a vise screw locations ledges;
• after removal of the body of the submersible pump vibrating kid, you need to install the piston drive - this is very important, since the installation must be strictly parallel to the seat.

Useful Tip! To accurately control the parallelism of installation of the piston disk - using calipers.

Built-in automatic protection system helps the pump to handle voltage fluctuations

When the pump is dismantled, it is possible to start cleaning and repairing. In addition to the blockage, one of the common causes of failures of the unit can be delamination of epoxy resin as a result of the expansion enclosure at temperature drops. To repair the water pump kid with his hands in such a break is quite simple. To start with a small hammer to tap the body to determine the place of detachment compound. Where he walked, the sound will be thinner. Then you need to remove the unit from the compound, and with the help of the Bulgarian cause on the body notches. The same incisions in a grid have to be applied to the unit.

Next, in the node and the inner surface of the housing is applied sealant adhesive is best suited for glass or other similar composition. Node-applied sealant is inserted into the housing, force is applied to it about 300 kg. Once the sealant hardens, the pump to collect in the reverse order.

The structure of pump repair kit may include Kid sealant, but sometimes more reliable to use additional means.

One of the important points in the assembly of the pump - this coincidence of holes, which are arranged in the central and upper rubber gaskets device. These nodes are symmetrical, so their relative positions could be confused. The efficiency of the device can be easily verified, dropping it into a bucket of water. The height of the water jet from the outlet without hose should be about 30 cm.

Dimensions of pumps "The Kid"

Common problems and ways of their solution

One of the common problems with the operation of this apparatus is that it works, but is not pumping water. The reasons for this may be several:

1. Attenuation device locknut pump Kid. If the nut on the adjustment screw, which is located in place of a fence of water, weakened, it simply tweak by adjusting so that the efficiency of assembly work.
2. Failure of the tilt rod. One of the most serious problem, as the stock is in an adjacent node and its very difficult to replace without specialized equipment. Fix such damage can be either in a specialized service center, or having at its disposal a second broken pump with another type of fault. In the second case, you can simply remove the pump from the donor defective unit and set it to the original device.
3. Faulty rocking cuff. To detect this type of failure, it is necessary to completely disassemble the unit. Rocks cuff looks like two small saucers, which are located bottoms together. This spare part is quite inexpensive and easy to replace on their own.

Carry out repair of the pump can be independently, the main thing to understand the principle of its work

If it breaks down the water pressure switch for pumps Baby or other complex equipment, it is better not to take risks and seek qualified help. Despite the simplicity of the machine device, improper repairs can lead to the complete failure of all the parts.

Kid pump: specifications, allowing to create a pumping station

One reason for the popularity of this type of equipment is that it can be to create a complete pump station that can be included in the automatic water system. To do this, you need only to supplement the relay design of the pump pressure, the check valve and accumulator. By means of the relay may be required to maintain the liquid level in the container, since it automatically enables or disables the pump when raising or lowering the water level, respectively.

With sufficient diameter pump Kid can give good water pressure, which is suitable not only for irrigation infield, but also to create an autonomous running water in a small country house. This not only greatly facilitate the organization of water supply, but also significantly reduce costs. Unit itself costs about 1-3 thousand rubles, and the installation of switches and other accessories will cost you another thousand. It is much cheaper than installation of autonomous water supply systems based on centralized pipeline.

The scheme of water supply of private homes, using a submersible pump

Useful advice! If you want to use the pump to create a complete pumping station, it is best to purchase model with all the additional features, ie automatic protection, relays, reverse valve.

If we talk about the pump Baby, user reviews on the Internet indicate that the unit is very popular not only in Russia but also abroad. Many users also confirm the high reliability, ease of installation and operation, ease of maintenance, and other positive qualities pump.