The canopy over the porch of wood complemented by a U-shaped support
Basic requirements for the arrangement of canopies
There are certain rules of installation of canopies over the porch of a private house. Photo options demonstrate improvement in accordance with all regulatory requirements. So, following the subtleties need to know when installing such a structure:
- minimum canopy width should be at least 1.5 times the door;
- overhang should be durable and resistant to any wind loads;
- ramp slope may be less than 20º;
- design should be ideally suited to the main facade style solution.
Plastic canopy, canopy with water-repellent fabric stretched
Important!Crate should be created exactly perpendicular to the rafter system.
The canopy over the porch of his metal hands
When creating a canopy of metal using conventional metal pipe or profile, which deepened in the ground of about 50 cm, and then filled with cement mortar. Rafters may be made of duralumin or the metallic bracket. It is also possible to use a wooden beam. Rafters stacked so that the finished roof canopy area greater than the area between the supporting pillars. Fastening beams can be produced by special fasteners or by welding seams.
Related article:
|
If the coating canopy over the porch with his hands made from metal sheets or a metal, the sheets must be laid overlapping, to avoid leakage. Before the flooring profile should take care of high quality hydraulic and vapor barrier.
Canopy polycarbonate without supporting pillars
It looks great made of polycarbonate canopy over the porch of a private house. Photos of various options presented below, demonstrate the uniqueness of style decisions. Such awnings do not require special conditions, how well can withstand the hottest days, and severe freezing temperatures. Due to the ease of harboring them loose material can be fastened to the wall of the house without additional supports.
porch house amended flower bed and a wooden shelter
When attaching the polycarbonate must adhere to certain rules. The end portions must be covered with a special sealing tape. Between the sheets are held together by means of connecting profiles. Mandatory sealing joints of the canopy and the wall in order to avoid leaks during inclement weather.
Important! If you plan arch design, the polycarbonate sheet can be bent to a radius of not more than 70 cm. Otherwise, the sheet may break.
L-shaped canopy over the porch is lined with granite
polycarbonate Installation rules
Another important condition for the fixing of polycarbonate is to keep the gap between sheets of about 3-5 mm. Since such material has a relatively high coefficient of expansion, it needs extra space to change its geometry on hot days. Another little subtlety. Installation sheets suggestions made in an original protective film, it eliminates the possibility of damage to the material even on the assembly stage.
Suspension canopy construction using wood and metal
Frame for such visors can also be performed from aluminum. This material does not corrode, does not require additional processing and perfect bend. It is ideal for creating rounded versions. Quite interesting to look frame made with elements of forging.
As you can see, quite easy to build yourself a canopy over the porch of a private house. Photo milestones demonstrate all the details and features of such structures.
