Mirrored ceiling: the pros and cons + simple instructions step by step installation

Mirrored ceiling - are incredibly luxurious and unusual variant design surface. As with any cover, a ceiling has its advantages and disadvantages. In this article we will talk about what you should look for when choosing a mirrored ceiling - its pros and cons, as well as how to properly carry out the installation of the cover with their own hands.

Pros mirrored ceiling

Among the advantages of such a ceiling can be identified:

1. capacity visuallyincrease the space premises, as well as the amount of light.
2. When installing the ceiling does not form a lot of dust and dirt. The surface on which will be installed ceiling, does not require pre-treatment.
3. Ease of cleaning. The mirror surface can be removed as a wet or dry method.
4. Not moisture permeability. These ceilings can be installed in the bathroom, and in the event of flooding, they are able to withstand a large amount of liquid over himself.

Cons mirrored ceiling

Among the shortcomings can be emphasized:

1. such ceilings not available with pictures.
2. On the surface, a very well marked accumulated dust and stainsSo often have to wipe the surface.
3. When installing the ceiling you need to very carefully consider the location of the lightingAs an improper localization of lighting can create excessive illumination of the room.
4. psychological distress. Many people who have similar ceilings, complain that reflected in the ceiling interior items create an unpleasant atmosphere. In fairness it should be noted that this lack of individual and shows he is not at all.

Installing a mirror ceiling

It includes the following steps: preparatory work and directly install mirror tiles.

What tools are needed in Progress

Most of the materials and tools, most likely, have to buy, because they are highly specialized. You need the following materials and tools:

• Tile specific shape and size.
• Glue.
• Level.
• Set of spatulas.
• Putty.
• Primer.
• Gloves and a roll of rubber.

Step by step instructions mirrored ceiling devices

Step 1. The first thing you must correctly perform calculations the total amount of material. At the same time pay attention to the shape and size of the tile, as well as the total area of ​​the ceiling surface. You need to make a plan in which the arrangement of the individual plitochek will be displayed.

Take the total area of ​​your ceiling and divide it into separate mirror element area, so you will be able to calculate the exact number of tiles. To this add value 8-12% reserve, in case of unforeseen circumstances. The required amount of glue is calculated according to the average flow rate value.

Step 2. Followed by a hold surface preparation. It should be smooth and have no traces of whitewash or paint. Conducted a thorough inspection, all defects are eliminated if necessary. If the surface roughness is small, it is necessary to use plaster, in case of a significant imbalance, it makes sense to take advantage of plasterboard.

Tip! It should be noted that the drywall used in the kitchen or bathroom, must be resistant to higher moisture content in the air.

The surface of the ceiling finished with primer before fixing the tiles, it must be dry.

Step 3.Installing mirror tiles. Using glue, as a fixing agent, will save time and money on installation. So this method is considered preferable. It should be noted that the adhesive should only be used on flat surfaces, which are pre-prepared.

installation process is as follows:

1. on the surface glue is applied, A spatula held its uniform distribution. Layer should not be too thick and thin chur. It is necessary to wait until it is completely grasp.
2. On each individual tile plot the adhesive layer and distribute it spatula. When installing strongly pressed down toward the surface.
3. All work must be performed with gloves to leave no greasy residue and divorce on the mirror surface. The clamp is made using a special roller of rubber.

A mirrored ceiling - a nice addition to the luxurious interior of modern apartments. Installation of this coating does not cause much difficulty, and the result will please you for many years.