Vinyl tile - a modern analogue quite popular at the moment, linoleum. This coating has the features of installation and operation, which will be discussed in the article.
Step by step instructions laying flexible vinyl tiles
According to eminent builders, plant cover is not considered a time consuming and extremely costly procedure. To tile serve you as long as possible, try to stick to the steps that we describe below.
Step 1. Disassembly Used coating. Done with extreme care. At this stage it is necessary to preserve the integrity of the lower layers, because their damage is fraught with increase in the volume of work.
There is a variant in which the dismantling of the old coating layer is not required. When the tile is installed, you can use special dub composition. Before applying such an agent should carefully read the instructions instructions for use. In a relatively small amount of money spent on the purchase of the solution, you Save your time and effort.
Step 2. the base trim. Important moment, because a poorly crafted base tiles never well not lie. This is worth remembering. Make sure that the surface on which the installation will be carried out, was
Step 3. Laying primer. You can use any of the proposed building materials market, option - they will cope with the task. The primer will help you increase the strength of adhesion of materialsAs well as it will get rid of the need to use expensive glue. In other matters apply glue or not a matter of personal preference.
Step 4. The marking surface. One of the most problematic options. The first step is to find the center of the room. For these purposes, it is best suitable otbivochnogo bowstringWhich can be purchased at any hardware store. Perform a right angle parallel lines. On them will be laid tile, you need to start with the center in order to reaching the jagged edges, they could cover the baseboards.
If you want to protect yourself to the max, then spend these lines every 2 rows of tiles. These actions will allow you to continuously monitor and, if necessary, to make instant adjustments.
Step 5. Start laying, as mentioned above, it starts with the central labeling. The application amount of adhesive should be calculated on the basis of how much you will have time to put the material in the next 7-12 minutes after application. The more experience the master, the more productive the work will proceed. The composition of the adhesive should be compatible with the kind of material used, the standard amount of adhesive is about 0.4 kilograms per square meter.
Make sure that that there are no gaps between the tile materials. Lay it on the method of "embedding". Dock lateral faces of the tiles and gently lowered onto the remaining area of the material composition, firmly against it. Monitor the absence of air bubbles, their removal is not a concern until the adhesive is completely dry. Loosely composition can be pierced with a sharp object, and pull the air mass.
Oversees tile orientation, it should be on the same level with neighboring instances. Quality tiling depends on the uniformity of the thickness of the base. Leveling tile level by increasing or decreasing the fixing solution layer only by a skilled and highly successful builders.
Tip! Make sure that any excess adhesive not stood out out - remove them in time before they were frozen. Get rid of the dried solution, bypassing the tile is very difficult to damage, so take extra 20-25 minutes to inspect all the laid tiles.
Upon completion, you need to carefully inspect the material and make sure that it is fixed on the surface quality. Take care of garbage collection, wash the contaminate sites tiles - this is done at least every other day. Arranged the furniture, and exploit space in standard mode is recommended by 2 days.
By following our simple instructions, you can put high quality flexible vinyl tiles without the help of the masters, and the result will please many years.
2017-2018. Copying of materials is possible without preliminary negotiation in the case of a direct hyperlink to our website.
