How toned windows in the apartment - the calculation and choice of material with step by step directions for installation

Tinted glass - ingenious invention. For many years, dubbing the film successfully used motorists. Most appreciated very dark, black film, cars toned it as a bunker. However, the rules of the road, as you know, is constantly being tightened, and paste the windshield film has long prohibited. But the windows of residential and non-residential premises as yet no prohibitions do not, so let's talk about the film pasting windows housing and non-residential premises.

What are the different types of tinting

• Sun protection. It is placed on the south side of the building. The role of the film - to absorb excess light energy of the sun, speaking the language of science, electromagnetic waves, or the light. If the south side leaves a lot of windows, it's a disaster. Summer in the room or office is unbearable heat, suffers appliances - TVs, monitors. equipment housing are heated, and the screen is impossible to see anything. Application of the film solves all these problems plus monitors cease to appear glare.

• mirror. If your home or office stands next to other buildings, all that is happening in the apartment, it becomes visible to neighbors and passers-by. SLR film allows to protect occupants from prying eyes. Valid only in the daytime, in the evening, when the light is turned on, this effect disappears.

• Protective. It is used when it is necessary to protect the window or windows by vandals. This increases the film strength of the glass and the average force at impact completely dissipates shock wave. In addition, this film can be used in the nursery so that the children do not accidentally injured, breaking the glass in an interior door or cabinet.

What tools are needed for self-tinting

• Knife - a building or office;
• sprayer with a soap solution;
• rubber spatula;
• tinting film required form appropriate quality.

It is not recommended to buy the first available tape, otherwise the money will be wasted. Better to take a proven film producers.

There is a film of different thickness and different shades: the thicker the film is, the higher its protective properties, but it is also more expensive. Before choosing a film sure to read customer reviews.

Step by step instruction window tinting

Step 1. Follow the glass measurements.

Step 2. On a flat, smooth and clean surface and unfold the film using a knife cut line and the desired resolution. It should be left on all sides allowancenot less than a centimeter (More is better).

Step 3. Substantially free from the ground surface of the glass particles, whitewash, divorces, and paints. Wet from the spray soapy water, then remove the excess with a spatula solution. Do this two or three times.

Step 4. Protective layer - liner carefully removed from the expanded film. This is a very critical operation, it is better to do it with a partner; that at some time delay action glue as the adhesive layer should soak soap solution. We must act quickly, so that the film is not tied up and not stuck together with adhesive surfaces.

Step 5. Soaped attach the film to the top of the window and the soft smooth strokes flatten it down. May appear small air bubbles or unglued place, it is necessary to squeeze out the air with your fingers gently to the edges of the film. It must be ensured that the film uniformly covers the entire window area.

Step 6. Finally, the most important operation: soft spatula to smooth adhered film from the middle to the center to remove excess moisture and air.

After you make sure that all smoothly and neatly pasted, with a sharp knife cut off the excess portions of the film, and after some time again be glued smooth surface rubber spatula.

Caring for windows pasted simple - most importantly, to prevent mechanical damage, scratch or so use abrasive cleaners should not be, the maximum that is allowed - is to wash with soap solution. Properly glued quality film last a long time, and most importantly, long serve yourself a glass that is glued film, especially in the case of using the protective film.