When even the most sophisticated cornices impossible to enter into the interior, or the room is too wide window sills, it is necessary to invent new dishes. But especially do not need to bother, because for all of us long ago came up with designers. It turns out that it is possible to hang tulle and without cornice - a hidden way.
Curtains, leaving the ceiling, looks elegant and unusual, and the design itself available to everyone. Niche for curtains with your hands - is it possible? Budget repair options and step by step instructions - on.
kinds of niches
Any project with a niche device for textiles will be unique, since it takes into account the preparation of parameters such as the window width, the length of the walls, the size of the necessary indentation of the window, the presence of lamps and etc.
Important! indentation size depends on the window projecting from the wall elements - sill, a radiator, built-in designs, etc. According to the rules, the design, the curtain should hang at least a distance 2 cm battery or a window sill.
Dimensions of the box defined for each room individually.
The main options for niche:
- Niche for the installation of a suspended ceiling.
- Design under the suspended ceiling.
- depressionNot involving the installation of the suspended structure.
The first two options can only vary the width of the opening, the presence and type of backlight. The third variety is created by the installation of the bar at a certain distance from the window and the wall is made decorative moldings made of plaster moldings or foam. You can set the bar from one wall to another, or create a U-shaped structure around the window opening.
Wide niche, as a rule, can be equipped soffitsAnd is equipped with a narrow LED tape.
Materials and tools
Most decorative and functional designs created in-house using the drywall. This material is available to everyone and used for partitioning device when necessary to protect one functional area and from the other to create a complete room. GCR also make false ceilings with different number of levels, columns, arches, decorative partitions and even furniture.
For niches under curtains need:
- ceiling drywall;
- guide profile;
- perforated angle;
- screws and dowels, nails;
- Tape-serpyanka, primer and two kinds of fillings.
The necessary amount of material it will be easier to count after drawing Drawing with measurements.
These are the basic materials required for the device box. The tool will be neededlevel, hammer, screwdriver, narrow and wide spatulas, plumb, knife Drywall, Construction pencil, scissors on metal or bolgarka, measuring tape, construction mixer, roller or brush, the container for mixing mixtures building mixer.
Make a niche - step by step guide
Consider niche device design example under the ceiling with narrow niche.
Process begins with the harvesting of all necessary materials. It is important to stock up on everything before the installation, so you do not get distracted by going to the hardware store.
Step 1. Application Markup. Available dimensional drawing or sketch tolerated on the wall and ceiling. It is important to be precise when applying markup, as it will depend on the evenness of the whole structure.
The first thing to do - draw a line the inner edge of the recess. To do this, measure out the distance from the ceiling window walls to maximize the projection element is added 2 cm and draw a line. Continue this line is necessary on the surrounding walls to the height of the window frame of the future.
Likewise outer border tracing the line which must deviate from the inner to the width of the rail. However, when installing a suspended ceiling, this line is not needed.
Step 2. Installation of the frame. The narrow width recesses plasterboard secured to the frame by the window problematic. Therefore, this part of the construction is going on the floor and is attached to the ceiling and the walls already in nearly finished form. The remaining rails are mounted according to the scheme.
Step 3. box assembly. It is also important before installing drywall conduct all necessary electrocommunications, and then fasten the material. Plasterboard is fastened to the frame by means of screws, the sheets should adjoin each other closely.
Step 4. After fixing plasterboard made rough finish putty mixtures ducts and decorative coatings.
As you can see, there is nothing difficult in a niche device with your hands, just follow the basic rules and tips.
2017-2018. Copying of materials is possible without preliminary negotiation in the case of a direct hyperlink to our website.
