Installation of a water meter with your hands: the installation and registration

The cost of utilities is growing every year. In order to save many people acquire metering devices. Counters for hot and cold water may be of different types. Installation of a water meter with their own hands - a serious event, requiring the competent approach and careful preparation. When you select a specific model should understand some aspects, allows you to purchase high-quality and cost-effective device.

Advantageous to put the counter on water: the advantages and disadvantages of the equipment

Determine the feasibility of acquiring computing device, installed on the water communications, it helps to study its pros and cons. It is important to remember that the final cost of the cold and hot water supply services primarily influences the number of residents registered in a particular apartment.

If the actual number now living in the residents is higher than the number of the registered person, then the amount of the monthly payment will be higher than the actual consumption. In this case, the total cost of services is defined as the average (taking into account the number of people).

The easiest way to save - to put water meters. This measure will allow for consideration of water consumed per month. As a result, the user does not have to overpay. Payment will be made for the actual amount of water used within the prescribed period.

If the number registered in the apartment corresponds to the number of tenants living in it at the moment, then the installation of water meters is less favorable. In such a situation, meter installation of hot and cold water will reduce the utility costs of these items is not more than a third.

Helpful information!Of course, there are also completely opposite situation. For example, if the number of the registered person is less than the actual number of guests, then the installation of water measuring device is not profitable.

How to reduce the readings of water meters? The best legal method is to install a new shut-off equipment, issued by the European standards. Ball valves in this case, allow for reliable monitoring of the movement of water in a pipeline.

Which is better to install a water meter: the variety of devices

Devices that are used for registration of flow, are installed on the water supply design in homes and apartments. Communications need to be connected to a centralized network. it is recommended to focus on some of the individual factors when choosing a particular device:

• the state of communication;
• water quality (it may contain foreign matter);
• own financial capabilities;
• medium temperature is conveyed through the pipes.

In addition, it is recommended to find out how much it costs to install water meters. DIY installation - quite a complex undertaking, which does not always afford an inexperienced person.

The first criterion, according to which water meters are classified, - the source of energy used for the operation. Depending on this parameter two groups of metering devices:

• volatile;
• volatile.

In the first case the operation of the device is carried out by natural processes which occur during operation of the device. In turn, the volatile water meters need electricity.

Installation of water can be performed on pipes with different diameter values. For example, the smallest cross section in this case is only 15 mm. The maximum value of the diameter - 20 mm.

Volatile devices are divided into several subgroups. These include electromagnetic models, as well as ultrasonic and eddy devices. Equipment for which enough of a natural process, called a tachymeter. Among other things, water meters are divided into classes depending on how much they service pipelines (single channel, dual channel, and so on. D.).

How to set the counter to water: charting

Scheme Fitting-metering device is necessary moment during preparation for installation of the device. This document may require water utility employees, so ignore it drawing in any case is not recommended. standard type circuit contains sequence elements from which the new node will be embedded in a communication tap. Consider what components are included in this document:

• electricity, which supplies the water in the housing;
• the locking element represented by a ball valve;
• filter (mesh type);
• a counter disposed in the direction of fluid motion;
• a check valve for a water meter.

The locking element is an important constituent component assembly. With the current of water can be stopped by means of it in the tube. The need for such action may be due to failure of the various equipment (e.g., check valve). It is important to remember that the ball valve is mounted in a convenient, easily accessible place, so that if necessary there were no problems with its use.

The filter assembly is also mandatory element. Its function is to capture large particles that may be present in tap Communications. Thus, in the installation diagram of the water meter indicates a coarse filter.

Note!filter removal must necessarily be directed downward. This will prevent rapid clogging of the mesh devices.

All of the above elements, as a rule, are equipped with an internal thread that allows them sidebar. For joining these parts together using special connecting devices - sleeves. Their design provides for external threads.

It is worth noting that there are mandatory and optional elements of the circuit. The second group include check valves. Their function - to prevent the movement of the carrier pipe in the opposite direction. The use of this device is a water meter connection scheme eliminates the possibility of increasing the readings are often caused by the pressure is unstable in communication.

Installing the check valve, above all, it prevents the ingress of cold water from one conduit to another. Most often, this problem occurs in the apartments, which has a shower with a low-quality mixers. Thus, the installation of the valve is recommended, but not compulsory measure during the installation of water measuring device.

The cost of installing the water meter depends on the amount of additional equipment. In some cases, after installation of the locking device is installed another valve. The need for this is due to the fact that when removing water-metering device from the pipeline may spill onto the floor. This element is also not included in the list of mandatory equipment.

Another device, referring to the category of optional, - the gearbox. Its function is to correct the pressure in the network. Setting this element to stabilize the pressure in the pipeline and avoid the rapid wear of the various locking elements as well as wastewater treatment filters. Mounted after the coarse filter.

Installation water meter: the preparatory work

Before starting the installation of water measuring devices must correctly select it. This takes into account not only the technical characteristics declared by the manufacturer, but also reviews users that can be found easily on the internet, visit forums for this profile theme.

When you purchase this device, check its equipment. It should contain all the necessary elements required to install a water meter in the apartment. A very important point is the choice of the point, which will make installation of the device.

Helpful information!Means for measuring the flow rate may only be installed in heated rooms. Indoors good lighting shall be provided.

Before proceeding with the installation process, it is necessary to prepare a space to house the device. In some cases, the pipe may not be suitable for the installation of such equipment. The way out of this situation is to be replaced. To answer the question about how to install the counter on the water, should be explored step by step instructions. Any deviations from the workflow may cause problems oplombirovki and operation of the device.

If the device installation is done with his own hands, it is required to make sure you have rubber seals, without which the meter will not function. Tapping such equipment is necessary to prepare sanitary gaskets. These include tow and FUM tape.

The service life of the water meter can reach 10 years. The operating time depends on many factors such as the quality of the device, operating conditions, installation.

To install you need to prepare the appropriate tools. Necessarily need to purchase special scissors are necessary for cutting of metal-plastic and plastic pipes as well as the necessary equipment for the soldering joints and a set of keys. To work with metal pipes may require Bulgarian and the instrument by which the thread runs.

How to install water meters in the apartment: an appeal to the water utility

This step needs to be done at the beginning (before the acquisition of the device). This is a very important point, because an appeal to the appropriate service allows you to get the list of allowed devices to be installed. In addition, the managing organization is obliged to provide their own requirements for water measuring devices, as well as its installation scheme.

After obtaining proper authorization is possible to start the preparatory work prior to self-install a water meter. When buying a water measuring device is very important to make a check of the two parameters. The first is to check the serial number, which is indicated on its case, with the figures placed in the passport. Both numbers must be identical to each other.

The second important point - check the seal. It must necessarily be located imprint of the State standard. Among other things, a passport, which is attached to the equipment, fixed the date of the factory test the appliance. Counters, not having appropriate documentation will not be recognized as valid.

In the implementation of purchase and sale of metering device is a necessary element to specify the date of purchase documentation. The seller must deliver the retailer's stamp, proof of purchase in the commission of a particular firm. The most suitable embodiment is a small time interval between the date of inspection and the date of purchase of the device. In this case, to get permission to install a water meter with their own hands a lot easier.

Helpful information!After buying a particular model metering device should contact the water utility, or any other company that has a license to test the device. Communal organization is obliged to provide the inspection.

In order to verify the metering device, the device is required to hand over to the company which is engaged in such matters. For water meters attached datasheet. After completing the test procedure, the document states that it meets the necessary requirements, and its operation is permitted. Experts point out that the technical data sheet should be put a stamp testing organization. This point should also be taken into account.

Related article:

Counter hot water with a temperature sensor: to save on hot water

Construction and operation. Advantages and disadvantages. Review of popular models and their prices. Authorized to install and register unit.

After checking the water meter is assigned to the date of the establishment of the seals on it. It is important to remember that self removal of seals is strictly prohibited, since such a device will not be accepted into the water canal. the instrument may be permitted in the event that the seal has been damaged by accident.

Is it possible to put a meter on the water? Often public services workers prohibit tenants to perform the installation of such equipment with their own hands. Keep in mind that the law does not prohibit the installation of a separate water meter. For this type of work does not require a license, so the water measuring device can be mounted in any convenient way for the user.

Installing a water meter How to choose the right place

Before proceeding with the installation of water measuring devices, it is necessary to determine the order, at which point the communication it will be located. Location for the water meter must comply with all the requirements specified in the regulatory documentation.

There are two ways to install water measuring devices. The first option allows for horizontal layout counter. In the second case the metering device is located in a vertical plane. Rules for Setting water meter allow for selection of the place in which a recording device will be. Consider what provisions should be considered in this case.

The room temperature is in any case should not be less than 5 ° C. It is required that the lighting was adequate. This will allow, if necessary, to check the performance metering device that appear on its display. The location is chosen so that the meter is in close reach for preventive inspection and maintenance activities.

Note!Terms of installation of water meters simpler if the unit is installed in the apartment. In this case, it is most often placed on the pipe, near the toilet. For a detached house set more stringent standards. For example, the distance from the entrance to the riser up to the measuring equipment must not exceed 20 cm.

Set hot water meter: the selection device tips

Choosing a metering device, which will be installed on the pipe of hot water (DHW), it is necessary to pay attention to several factors. The first rule to remember: not all counters models are allowed to install the managing entities. Therefore, before you buy a water measuring device, you must contact the municipal service and ask them for a list of devices whose use is permitted.

Meters Mounted hot water pipes usually contain special markings on the body. It has a red color corresponding to the operational purpose of the device. For the installation of such a device is required to study the sequence of actions that allows you to answer the question of how to put a counter on the water.

The most common models of counters, which are used by domestic consumers are the tachometer. Measurement of the amount of water consumed in a given period of time in such devices is performed by mechanical means. Nonvolatile models are divided into two groups:

• turbine;
• wing.

Devices that belong to the turbine group, are used in the home. They are mounted on industrial pipes whose diameters are in the range of from 50 to 200 mm. Wing-volatile devices are installed on the communication indicator section does not exceed 40 mm. Price water meter installation depends on the warranty provided by the organization concerned. The cost of this event varies from 1 to 4.5 thousand. rub.

Consider the most important points that you need to pay attention when choosing a WAN water meters. This equipment must be designed to operate under pressure of 16 atmospheres or higher. Any device should withstand high temperature performance. Typically, such devices can be used in a temperature range from 5 to 150 ° C.

It should also pay attention to the sensitivity limit of the water meter. This characteristic should correspond to the volume of water consumed for 1 hr. Each water measuring devices has a certain error, which is accounted for in the standard documentation. For DHW accounting unit measurement error must not exceed 5%.

Helpful information!To install the hot water meter is recommended not to use the services of little-known firms.

Self-installation of a water meter is not recommended, as the possibility of admitting the mounting error is extremely high. However, with the right approach and the right training to carry out this operation it is still valid. In any case, you can always use the services of professionals.

How to install water meters hot water with his own hands: step by step guide

certain limitations are imposed on the installation of such equipment. Keep in mind that hot water meters must be placed at a specific location for this purpose. The unit is mounted immediately next to the pipe outlet of the riser. Installation should only be carried out on a straight length of pipe upstream of the branch line.

Horizontal water meters in any case can not be mounted in the vertical plane. Reverse the rule and subject to the device, the type of installation that provides the vertical arrangement.

How to install water meter? Consider action incremental algorithm which will be required when installing the device, related to a mechanical (non-volatile) categories. The first thing you need to accomplish - to prepare the unit for installation. Next, you will need to collect node based on the selected wiring diagram. Use rubber gasket connection in this case is not necessary, since the assembly is "fitting". It helps calculate the number of turns of the seal that will be required to fix the node elements.

The next step is to dismantle the temporary structure. Further it is possible to proceed to the final assembly site. How to install the counter on the type of hot water? Finish the assembly is performed using O-rings, as well as ODM-tape.

Box metering device in the conduit may be made in different ways. In this operation primarily affects the material from which communication is executed. To remove the section of pipe is typically used bolgarka. The tool allows you to quickly enough to cope with the segment by cutting the required length. This is calculated in advance (at node assembly).

If the pipeline is made of steel, then the segment within which the water measuring devices to be installed, replaced by the polymer. You can do without it, but otherwise you will need to make tapping on metal pipes, it is much more difficult. Respond to the question about how to install water meters help special video on this topic.

Helpful information!With self-installation should be noted that users often have problems with access to the strainer. To avoid possible inconvenience, it is necessary to deploy the cleaning member in the direction of the room at the time of node installation.

Installing the meter on the polymer water is performed using a special soldering equipment. soldering process requires a certain knowledge and skills, so the self is not recommended it. In turn, the edges of multilayer communication are stripped, then special connecting elements (fittings) are mounted on them.

By the end of the assembly is mandatory checks functioning of water measuring devices. During startup, the water should be no leakage. In this case, the installation of the water meter can be considered successful.

Installation of cold water counter with his own hands: Recommendations

Modern apartment complexes are often equipped with common water measuring devices, but for the organization of a competent accounting is not enough. Setting an individual device, recording data on the consumption of cold water - it's a great way to cut costs, which goes on payment of municipal services.

How to set a water meter on the cold water? The installation of this equipment it is possible to produce both their own and use the services of a qualified professional. In the first case, you need to carry out the necessary preparations and to study step by step instructions.

The preliminary stage of the installation (as in the previous case) involves choosing a suitable location. Most often, the installation of the recording device is performed in close proximity to the point of abstraction.

The apartments with a modern layout is a place in the bathroom, so it is in this room, you can often see the metering devices. In some cases, these devices must be placed not only in the bathroom, but also in the kitchen, for example, when there are two intake points (a non-standard layout of the home). In this situation possible to install two counters cold water.

The very process of self-assembly of water measuring device is carried out relatively simply. However, it requires training and the availability of a large set of instruments, the composition of which can vary depending on the material of communication, which made the device sidebar.

To simplify the process of meter reading that is done on a monthly basis, to the point of installation of access must be provided. In addition, each measuring instrument of this type requires periodic transmission and oplombirovki verifications.

Helpful information!Another condition that must be considered before setting the counter to water, provides that the communication should not contain frames before metering device. Thus, best location counter - place situated after the shut-off valve.

It should be noted that in some apartments pipeline design boasts a hidden location. In this case they are inside the walls. To set the counter to perform required dimension corresponding niche, after which the viewing window is organized. This allows for easy access to the device.

Self cold water meter installation on metal pipe

Currently, the metal pipes are rare. However, in some of the apartments their condition is regarded as satisfactory, and therefore no need to replace them. In such a situation inset appliance registration is performed on the metal tube. This process is more time-consuming and has its own characteristics, which should be paid attention to.

Assembling node - the first stage of the installation of the water meter. Price per job qualified person can be different (from 2 to 4 thousand. rub.). site assembly is made based on a specific sequence.

The first step is set closure device (tap). Next, you install the filter element. Joining of elements interconnected by means of a special clutch equipped with a cap nut. After it will be self-metering device. Ends the assembly unit on the installation of the second sleeve. In some cases, the check valve is provided in the structure.

Deviations from the above order of the assembly site are not allowed. Removing measurements made after the pre-assembly of the whole structure. Simply put, the unit length is determined, which is required for the notch pipe segment.

Replacing cold water meter eliminates this procedure. When cutting a portion of communication, the corresponding unit length, it is necessary to make correction for the binding thread. As a result, the distance between the pipe ends must be less than the length of the node in exactly the thread length.

Note!Before starting work on the sidebar of water measuring devices in the conduit of the riser must be cut off the media supply. It is recommended to warn all the neighbors in advance that a specific date will be tie-metering device.

Before you get started, it is necessary to purchase the flare nut and rubber ring, without which the installation of a water meter. The price of these elements may be different. Its advised to take into account when drawing up the work plan.

In order to cut the communication section, it is best to use a conventional grinder. It must be mounted on metal disk. Then, by using special dies produced thread applying to the pipe ends. This helps speed up the process of special equipment operating from the mains.

After execution of the thread starts on the device installation duct. All connections, docked with the help of the thread, it is necessary to equip the sealing reeling. Without it, the design will not be enough sealed, resulting in leaks. Water meter itself is mounted last. Union nuts used for installation must have rubber gaskets. After installation of water measuring devices carried out a trial run of the system water.

How to set the counter to water: stepwise assembly on a plastic tube

If the pipe is made of polymeric material, then setting the meter is made below of the locking device, the overlapping access of water into a dwelling. Before you begin, it is recommended to perform the appropriate measurements. In addition to the length of the device, it is necessary to consider the length of the auxiliary elements.

Next, stop the water supply. You will then need to cut part of the communication (according to preliminary measurements). Many people are interested in the question of whether it is possible to set the counter by the water on the polymer tube. The answer is definitely yes. However, this type of mounting is different from the tapping device into the metal pipe structure. Joining of the individual elements in this case is made using a special soldering iron, for which required special skills.

The next step is to install counter soldering the connecting member to the first end of the tube. Then thereto screwed cleaning filter. If present in the pipeline construction crane, then the cleaning member may be installed on it. Further, the connecting fitting mounted on the edge of the second polymer tube. Then bolted splice elements are installed rubber gaskets.

You can then proceed directly to a frame-metering device. A very important rule is to install a water meter to determine the direction of water movement. As a rule, on the device contains a special arrow that simplifies this task. It is through it is determined by the desired direction.

This process is less time consuming than installation of the measuring device to a metal communication. However, it has many nuances, the main of which is soldered fittings.

Substitution hot water meter: both the dismantling of the old device

Replacing your old device to a new device involves dismantling, which is out of order. The most frequent cause of failure counter is clogging and common cases of mechanical failure of these devices. After the overlap of the water supply in the riser is necessary to open any of the valves installed in the withdrawal of the riser. This will reduce the pressure in the system.

Helpful information!Before dismantling the old device is recommended to put on a floor (for the pipe) any container. This is due to the fact that when removing water measuring device from the pipe will flow remaining water.

How much is to put a counter on the water? Call a specialist in this case would be more expensive, as the final cost will include the dismantling of the old device.

It should be noted that sometimes it is difficult to perform the removal of the old device. Most often, problems arise with metering devices, which have been in operation for a long time. As a result of this union nuts connecting fittings (American) are covered with rust. In this case, it helps tapping problematic places conventional hammer.

Another option allows you to dismantle the structure, coated with rust and scale - using an adjustable wrench. First it is heated problem areas that contribute to their disengagement. Installation of new hardware is performed according to the rules and setting the water meter has a strict sequence, departures from which prohibited.

Many experts say that the ends of rusted metal pipes are not suitable for subsequent use. So you need to simply remove them with the help of grinders. However, in this case, the distance between the ends of the pipes increase, which should be considered when a node assembly.

How to install a water meter: flow direction

Determining the carrier flow direction in the communication and installation of metering devices in accordance with it - a very important point. As a rule, the case of each water meter is an arrow, which allows you to determine the direction of the installation easily. The same applies to the auxiliary parts. This index is absent except on locking the device. This is due to the fact that the ball valve may leak in two directions.

Each water measuring devices must have the pointer. Therefore, it is necessary to pay attention during the installation of cold and hot water meters. Installation of two or one instrument is made exclusively in the direction of water movement in communication.

All auxiliaries must be mounted strictly under the carrier flow direction in the communication. In some cases, the body of this or that detail may be missing arrowhead. Most often it is a marker of poor workmanship element.

Note!Cheap meters are little-known firms often do not have the marker. In this situation, experts advise to replace low-grade device. In the absence of such a possibility is produced independently determine the mounting direction.

How to put a meter on the water in the apartment? To determine the direction and carry out the installation, you must carefully examine the design of the instrument. Thus, policy, proper installation is not that difficult, if you understand the essence of the process and take into account all the little details. The main difficulty tapping water meter associated with obtaining the permission of the management organization, as well as carrying out oplombirovki and recording device.

Installation water meter management company representatives

Most consumers are hesitant to self install water measuring devices, because they are afraid to execute it properly. In the future installation errors can cause failure oplombirovki and commissioning of the device. a qualified professional service fee depends on the type of water meter installation and features. For example, counter inset into the metal line is more costly, since different complexity.

How much is the installation of water meter? The average value of tie-metering device is approximately 2.5 thousand. rub. professional work is paid once. In return, the user receives a guarantee on the instrument. The duration of the warranty period can be different. Most often, the company which carried out the sidebar device in the pipeline provides a guarantee for 2 years.

In the event of a malfunction the installer is obliged to repair it for free, which is also an advantage of using the services of professionals. How much is the installation of water meters with oplombirovkoy and registration? These services are generally not available separately, that is, they belong to the initial amount specified installation company.

To order the service you need to contact the appropriate company that has the legal right to carry out such work. And not always have to come in person to the office of the organization. Sometimes the application can be filled in on the company's website, which is very convenient. After that experts made inspection of the point of connection. Time and date of the immediate installation is discussed in advance.

Experienced specialist performs similar work fairly quickly (1-2 hours). It is important to remember that the installer responsibilities include not only the installation, but also filling, as well as the issuance of special regulations, confirming the quality of the job done.

How to conduct a counter right oplombirovku

On completion of installation of meters is carried out its inspection and test run. It is necessary to confirm the health of the device. The next step is oplombirovka device. This procedure is the final stage, after which the meter readings are legitimate. In the future, the challenge of experts is required only during the verification of the water meter. Reviews of the company performing verification, - mainly on the need to pay attention.

seal installation in any case it is impossible to carry out on their own or hire people to do that are not related to the management company or the local water utilities. Oplombirovka only professional who is a member of a specific municipal organization. To register counter, is required to apply for the adoption of water-metering devices on the account.

Note!Before the official registration hydrometer his testimony is not valid and will not be accepted by public utilities. Therefore, to delay the oplombirovkoy not recommended.

The installation procedure and commissioning of this equipment may seem to someone too complicated. However, competent approach will perform all of the items in a short time. Of course, everyone decides on their own, be sure to put a counter on whether or not the water.

Water meter, as well as all the necessary elements to it must be in good condition. To confirm this fact, the expert who carried out the installation, the installation of the act, as well as preparing other necessary documents.

Following the filing of the corresponding application communal organization is obliged to provide the specialist for oplombirovki. As a rule, the application process takes 3 to 5 days. The user must present a master installation certificate, and a passport that was issued by the seller of the equipment. After installation seal the master is the act of commissioning of water measuring devices. In this document, it is indicated the initial reading of the water meter.

In addition, the management company of a specialist should provide the user agreement, which will be painted with all the nuances of the equipment maintenance. The landlord is obliged to sign the document.

Calibration of the water meter: interval features and process

Verification of water metering equipment is 4-6 years after its entry into operation. It is carried out by employees of urban public utilities or private entities that are authorized to provide such services to the public.

For water meters installed on the hot water pipe, a gap between the tie and the first verification is 4 years. In turn, devices that record data on cold water home, check less often, namely every 6 years.

However, there are situations that require unscheduled verification of water meters water canal. The most common reason is the suspicion that the equipment is functioning properly and as a result provides false information. water meter device does not allow intervention in its structure. If this occurs, then an unscheduled verification can detect the violation. There are two options for verification:

• at home;
• In the organisation.

The second option provides for a preliminary dismantling the water meter and its delivery to the municipal service. It should be noted that water utility employee or any other organization has the right to withdraw the unit without a permit.

Note!The representative of the inspecting Party is obliged to take readings from the instrument, as well as provide the user with the appropriate documentation.

Delivery and return water metering device is carried by the user. The cost of checking performed at home, usually is 500-600 rubles., But the amount can vary depending on the parent company's and the region that it serves.

Thus, with proper preparation you can do the installation of the water meter in the home. It is important to understand that resolved to take this step is only in the case where there are one hundred percent confident in the positive outcome of the event. Buying a quality instrument requires attentiveness, as today meets a lot of low-quality devices, the term of which is extremely small service.