LED lamps for indoor lighting: Types

When planning the lighting living space should be guided by the fact that the lamps must emit uniform light, use energy efficiently and have a long service life. That these requirements are met LED lamps for indoor lighting. In addition, the compact size and low weight make it possible to mount them on walls and ceilings made from almost any material.

The use of LED light sources and their characteristics

LED-lighting the undisputed leader in virtually all basic parameters, leaving behind not only incandescent, but also fluorescent and halogen light sources. The use of LED lamps for indoor lighting of residential and industrial buildings due to a number of exceptional qualities:

• economic efficiency - LED lamp consumes 10 times less energy than similar brightness incandescent lamp and 40% more economical than fluorescent light sources;

• Operating duration - LED-lamp can operate for 11 years of continuous operation, which is higher than those of conventional lamps by 100 times;
• durability and safety - due to the absence of filaments and glass enclosures, LED lamps resistant to shock, vibration: on the operating parameters of the lamp did not fall with influence polutorametrovoy height. The lack of heat makes them fireproof;
• soundless operation, the absence of UV light - LED lights emit a smooth, flicker-free light, as opposed to fluorescent lamp whose emission is accompanied by clicks popiskivaniem, lump disconnecting and generation ultraviolet radiation;
• maintainability and recycling - LEDs the lamps can be easily replaced by soldering, and the disposal of obsolete lamas does not require special technology;

• wide temperature range - LED-lighting may operate under difficult conditions at a temperature of from -60 to 50 °FROM;
• orientation lighting - LED huge range of modifications to the scattering of light at an angle of 10 to 140 degrees;
• ease of installation - the presence of the standard pin connectors enables you to install LED lights in place of previously used false and embedded devices. In addition, the design of the lamp does not require the installation of additional devices (ECG).

This allows a number of advantages to use LED lighting in the lighting of living rooms and technical facilities rooms: bathrooms, pantries, closets, corridors, staircases, as well as in public buildings: hospitals, offices, libraries and other organizations.

Types overhead LED lighting fixtures for indoor lighting

The main feature of the overhead lamps is that the plan to install them can be not only at the stage of repairs, but after this process is completed. An excellent solution such coverage will be for those who are contemplating to use it to illuminate the furniture or accent lighting of individual zones of the room.

According to the surface mounting method is isolated overhead lamps wall and ceiling. Depending on the destination premises, where the lights will be located, they are:

• Living room - usually a square or round overhead LED lights with stylish shades, echoes the style with additional lighting devices;
• hallway - taking into account the configuration of the room, you can use one or more lamps in round or square shape, or a series of wall-mounted dot structures;

• for the children - depending on the style of the room, you can choose the model of thematic performance in the form of a ball, the sun, butterflies and so on. You can create an entire composition, adding small lamps bedside lamps;
• for the office - overhead lighting for the room is selected in aged version, complete with table lamp;
• kitchen, bath and toilets - use devices of different shapes with tight shades, the most appropriate design;
• for utility rooms - here you can use the model of a square, rectangular or circular in shape, with mounting as a ceiling or a wall.

Useful advice!application overhead LED lighting under the cabinets for the kitchen It makes use of the main light source is minimal.

Models overhead LED wall lighting fixtures for home possess mechanical strength, resistance to vibration, the design of some of them made vandal-resistant, which allows them to be installed in areas with complex conditions, including porches or other sufficient Loop location.

LED lamps for indoor lighting: recessed model

LED lamps are single independent design and have compact installation dimensions. They can be used not only as the primary light sources but also for accent lighting of individual zones and elements. With a variety of luminous colors, such devices are used for interiors in all colors.

Recessed LED Down Light

Spot lighting is one of the most popular ways to transform the interior by means of lighting. Structure spotlights represents housing concealed in the surface, and a front portion consisting of a light bulb, the lens, the reflector and other decorative items. The main advantages of a compact, rigor and versatility.

issued LED recessed round, Square and rectangular shapes. By Case distinguish subtle mind, and the standard model. Have several luminous colors, including cold, warm, daylight white and color. Also available models, different from the angle of luminescence: narrow (to 45 degrees) and the wide beam.

Such devices are mounted using special spring-loaded clamps. To do this in the surface of the smaller diameter hole than the front part of a point fixture that allows to hide the mounting gap. After connecting the wires to the device clamps are tightened and the housing is inserted into the hole. Thanks to this simple method of fastening, spotlights can be easily installed and removed.

Useful advice!Choosing a point model, pay attention to the mounting: the material clamps must be durable enough to withstand the weight of the lamp.

Versatility spotlights is that they are used for general lighting as well as for local illumination. They are ideally suited for the lighting design of ceilings, niches, arches, beams and decorative elements. There are models of lamps with swivel design. Turning around the axis of the moving part, you can direct the light on a particular element of the interior.

Models of furniture recessed LED luminaire

Given the small size, lack of heating and low power consumption, LED lights built into cabinet furniture, placing them both inside and outside. Such a backlight can be provided with additional options: turn on when opening the drawer or cabinet doors, lights cloakrooms content, creating directional light flux.

Assortment of models built in furniture fixtures is quite diverse. This lamps circular, triangular and square shape, which structure is completely mounted in the furniture, leaving only a decorative frame on the surface. Implemented as separate devices, and sets consisting of two or three or more fixtures.

To create a shadow-free working surface area of ​​the table, cost-effective to purchase a system from five lighting devices, the kit which includes building wires, transformer and network cord. For use in cabinets and closets very comfortable model LED lamp 12 volts with a side button. Their length typically by from 25 to 60 cm. Given the opportunity to order the product, up to 1 m.

Furniture lighting at times increases the comfort of use of cabinets and dressing rooms. A lighting design niches and shelves effectively emphasizes the elements of the interior, making it more prominent.

Useful advice!When choosing lamps for furniture lighting is necessary to consider the appointment of the room, where the furniture. If it's a kitchen or bathroom, use luminaires with special protection against moisture and splashing water.

The design of embedded linear LED luminaires

Linear lamps embedded in the ceiling and walls formed from sheets of drywall, slatted panels and other coverings. Using connecting elements they can be mounted in a single line, and light with a transition contour from the ceiling wall at 90 and 270 degrees. The design of such a lighting device is an aluminum housing the LED board and a plastic lens.

An advantageous feature of these light sources from fluorescent analogs is that on lighting Square LED lights It requires 3 times less power. A service life of more than energy-saving models in 8-10 times. In addition, when a continuous linear arrangement of luminaires no effect of dark spots, which allows creating uniform glow unimaginable line.

Linear lighting system instantly included, the number of start / stop does not affect the duration of the use of lighting. Linear lighting design is used for the interior lighting of residential, office, industrial premises, warehouses and shops of agricultural buildings: greenhouses, poultry houses and so forth.

LED fixtures with motion sensor and light

There are situations when it is necessary to use lighting in places where it is difficult to bring power or if you want a non-permanent coverage, which would function only in case of finding people in the area. It provides for the use for these purposes LED lights with motion sensor on batteries.

These devices work by 4 batteries (AAA batteries) and have at their device 6 LEDs, which are able to create a fairly powerful illumination. A special feature of fixtures with motion sensor is the duration of use (the battery lasts for 2,5-3 months), and the ability to adjust the brightness, turn-off delay time and sensitivity of the sensor movement.

Main parameters of lighting fixtures with motion sensor:

• operating voltage - 3B;
• duration of LEDs in the "failures" mode - more than 80,000 hours;
• setting brightness;
• setting different modes of shutdown delay (20, 60, 90 sec);
• Sensor sensitivity - 3 m, the angle 90 degrees;
• power consumption 65 mA - in the operational mode, 0.35 mA - to waiting state.

The scope of use of such lamps include lighting staircases, dark corridors, hallways, pantries, closets. Such lamps are appropriate in houses inhabited by families with children: the child during the night can not be afraid to go into the kitchen or washroom. In addition, such lighting devices can perform emergency lighting function.

LED lamps with battery: Emergency Light

Emergency lighting devices are used in extreme conditions for the evacuation of people or when turned off the mains voltage. The main feature LED emergency lighting fixtures with battery is the ability to operate independently of the power supply. auxiliary power supply unit is charged from the power supply when the supply is performed in the normal mode.

There are several modifications LED rechargeable lamps emergency shutdown:

• intermittent actions - these devices only work when the main power supply. When voltage is applied to the network, it is only used to recharge the internal power supply. The duration of operation in emergency mode is 1 to 4 hours, depending on the capacity of the battery model;
• DC operation - during a power outage, such lamps will automatically go into offline mode on battery power. This allows them to be used not only as an emergency, but also as a lighting of premises where there is frequent power outage;
• combined - such devices have a system of several lamps, some of which work Only in the presence of a network voltage, other - only from the power supply in the absence of feed electricity.

Emergency supply units for LED lighting They can be mounted in their enclosure. If the free space in the luminaire housing is limited, it is necessary to provide models of smaller batteries or install a power supply in a separate additional housing.

Useful advice!When using the emergency luminaires with battery should take into account the temperature conditions of their operation, as power supplies is quite sensitive to changes in temperature.

The main use of emergency lighting - use of public places: shopping centers, administrative offices, child care centers, hospitals, sports centers and other facilities.

Armstrong LED lighting: lighting prices

Given the popularity of the use of administrative, industrial and commercial applications of suspended ceilings Armstrong, lighting manufacturers have developed models of LED lights embedded in the ceiling design, without compromising the integrity of the surface. These lights are easy to install and greatly reduce power consumption.

Dimensions of fixtures for ceiling Armstrong identical standard size false ceiling plates 600x600 mm. Thanks to this organization for the lighting is sufficient to install lights in the suspended structure of the cell. According to the brightness of the light flux LED lighting is guaranteed replace two conventional fluorescent device.

It plays an important role sustainability of LED lights: unlike fluorescent counterparts, they do not contain mercury. In addition, when one of the fluorescent lamps design fails, the lighting unit begins to emit a flashing light, which adversely affects the vision of people in the room. If the voltage is in an unstable network, fluorescent lamps have to be changed frequently.

Price LED lamp Armstrong 600x600 mm production company New World (Russia) is 1100 rubles. Illuminator power 39 W at rated voltage supply 220, weighs 2.5 kg, and has an embedded structure. Tall LED lamp power factor (0.9) facilitates operation of the lighting design without energy loss.

The cost of lighting fixtures Armstrong depends on the number of purchased units. The more order, the lower the price per lamp. Many companies have discounts and sales. The minimum cost of retail -. 980 rubles, wholesale buyers offered price of 880 rubles. a piece. The products provide a guarantee from the manufacturer.

The range of LED lamps Jazzway

CompanyJazzway specializes in the production of all types of light sources for interior and exterior lighting of office, commercial and industrial buildings. In addition the company offers lighting batteries, extension cords, chargers and related accessories. Starting from the production stage to shipping products, a quality control system. In addition, all products are accompanied by a warranty.

In the online catalog, you can find various models of LED lighting: recessed, overhead, points, lines, lighting fixtures such as Armstrong, miniature, board and emergency lamps. Some models have a built-in dimmer and a motion sensor.

Price point embedded LED lamp Jazzway PPL-R 180 140 12W / 4W 6500K blue round shape is 1120 rubles. The diameter of the mounting fixture bore - 180 mm, advantageously used for accent lighting. The price includes the cost of the LED lamp. Buy down light without lamp, made of high quality polycarbonate construction, it is possible for 65 rubles. Purpose - to set in Slack and suspended ceilings.

With a comprehensive range of high-quality LED products, you can buy models of lamps suitable for interior of any style and direction.