Gypsum tiles under brick: specific installation and operation

There are many materials that can be used to design and interior renovation. Gypsum tile under a brick - one of the best options, as has excellent thermal insulation properties, resistance to temperature and humidity, and importantly, completely environmentally friendly. This article will examine how best to lay the material and what you should pay special attention during installation.

Advantages and disadvantages gypsum tiles under brick for interior decoration

Using a gypsum tile brick as the fabric has a mass of positive properties, each of which is worthy of attention:

• light weight material. Due to the fact that the plaster tiles at times easier to many other materials, is facilitated by the installation procedure and no the need to make the strengthening of the foundations, which is mandatory in many other cases. Also it should be noted that the load applied to the structure as a whole, is reduced;

• independently carry out the installation will not be difficult even for a beginner. There is also no need to purchase any special tools. Moreover, reading the recommendations on how to make decorative rock with his own hands, it is possible to abandon the acquisition of finished material in favor of a self-made;
• environmental friendliness. Given that all of the components and materials that make up the tile, natural, this material does not pose a threat to human health;
• a wide range, with a choice of different colors, textures and imitations of other materials;
• buy gypsum tile can be at a reasonable price.

Thanks to these positive aspects, many homeowners and designers believe that to buy a brick tile for interior decoration - the best solution of all is that offered in the market today. Thus, it is possible to diversify the interior, while spending too much money and effort to rework.

Although it is worth to pay attention to some shortcomings, which, although they are not significant, still have to be considered in advance:

• the material is not resistant to moisture, it actively absorbs upon contact. As a result, products are highly susceptible to warping. To avoid this, when operated in environments with high humidity, the surface layer is applied to a special protective structure;
• plaster tiles - brittle material which is resistant to mechanical stress and requires careful handling;
• to take care of such tiles can be difficult, particularly if its surface is embossed and is capable of accumulating dust.

In order to minimize these negative effects, which can be characterized by just for this material, it is important to comply with all the recommendations in the installation process. Also, do not use this material for wall surfaces, which are highly susceptible to contamination.

Gypsum tile under a brick: Various methods styling material

Plaster tile under a brick can be made by one of the many ways. The most popular full or partial wall cladding. In the second case, the material is combined with other surfacing materials, such as wallpaper, decorative plaster, tiles.

The perfect solution - the use of decorative tile under a stone for the decoration of doorways or arches. Sometimes decorative tile under a brick is used for processing of mirrors or niche. Such a solution can not only make the look more attractive, but also to protect some surfaces from dirt and wear.

Useful advice!Brick tiles - perfectly suitable material for the design of the fireplace. It is not only resistant to high temperatures, but also fireproof.

In order to fix the elements at the surface, it is possible to use one of two techniques: dry envisaging the use of fasteners (bolts or rods) or wet, which uses a special adhesive plaster tiles.

How to prepare the surface plaster tile

Laying decorative plaster tiles for interior decoration requires advance of the work aimed at to prepare the surface with which to work with. The procedure should be carried out in stages with the strict observance of the order of steps, and all of the recommendations that are provided:

• the first thing to do - to level the surface. In order to eliminate defects, you can use putty that can effectively remove even the smallest cracks;
• then the surface is cleaned from dust and dirt with water and left to dry;

• after that you can continue to work with tiles, first of all, paying attention to its sorting and removal of defective products, the shape of which does not meet the requirements.

Important! In the process, it is recommended to give up the use of elements having any defects: chips, cracks and so on. Otherwise, it can negatively affect not only the appearance of the styling, but also its strength.

If only the whole tiles of plaster is not enough to design the surface, you can manually dorezat missing items. You can use a hacksaw.

Other tools that may be needed in the process of laying decorative tile - Drill required to make the holes necessary for the construction of communications. As well as sandpaper, in the event that you decide to resort to a wet laying method. It is used to improve the adhesion of the back of the tile.

Secrets of the tile that mimics a brick, on various grounds

Decorative tiling brick for interior decoration can be easily laid on any base, including concrete, metal, brick, wood, etc. The main rules that must be followed - nonsusceptibility base deformation and shrinkage, as well as carrying out preliminary work on alignment base.

When working with concrete surfaces, special attention should be paid to the porosity. As a workaround, use a special primer, which is somewhat reduce absorption performance. At the same time, for the newly laid out brick walls such processing is not required. As for the adhesive, which can be used for this purpose, it is quite suitable one that is designed for laying tiles.

If you have to work with a fairly old brickwork, it is necessary to advance to conduct cleaning of efflorescence, causing the surface of the primer. After that, plastered wall.

Often have to work with less fundamental bases, e.g., gypsum board or plywood partitions. In this case, before you buy gypsum tile under a brick, you must ensure structural strength, and that it will stand provided at her burden. Also pay attention to the level of surface moisture.

The base of the walls should be as dry, and all the elements are firmly and securely fastened. In this case, the surface can be applied to the primer. When working with a wooden base, glued on top of it fiberglassWhich subsequently plastered.

Important! Before proceeding with the installation of gypsum tiles on the surface of the wall made of plywood or drywall, you must make sure that it is not prone to warping.

Features mounting gypsum tiles dry method

To coating of plaster tiles stacked dry method was reliable and attractive, you need to take care of compliance with the rules of technology. The first step is to take care of the presence of special protrusions and recesses on the sides of each element. The mounting procedure is represented by the following sequence of steps:

1. From one corner of the room is measured distance is equal to the width of the selected tile. At this point the wooden batten fixed appropriate size.
2. The opening, which was formed by fixing the vertical slats stacked tiles. This procedure should be carried out from top to bottom.
3. In order to secure the elements, use screws and bolts.
4. After that, from the first rack again, measure a distance equal to the width of the tile, and then the procedure is repeated until, until the entire surface is not framed properly.

Features mounting gypsum tile wet method

In order to smoothly and beautifully laid plaster tile wet method, you must use a slightly different approach. The first series of markings required. If the planned installation of the various elements (eg, on the wall will figure), it is necessary beforehand to make layout on the floor.

Preparation of adhesive solution also requires special attention, because one approach costs kneading as much as you will be able to develop in a short period of time. Otherwise, it may deteriorate.

Related article:

Wall painting in the interior: an unusual solution in a modern apartment

Existing types of materials for hand-painted walls. The main stages of drawing. What should pay attention to the novice master.

Unlike the previous method, wet laying must begin from the bottom angle, gradually moving to the side and upwards. When this layer of adhesive solution was coated on the reverse side of each element should be no thicker than 2 mm.

Important!There are two variants of wet laid: butt and using jointing. In the first case, the elements are placed close to one another, while the second will need to leave a certain gap, when desirable than the same between all the elements.

Some nuances and expert advice on the plaster tile

In the process, useful to know some of the subtleties that will receive the highest quality and aesthetically pleasing result. So, experts offer the following recommendations:

• gypsum, although the strength of the structure, characterized by increased brittleness. Therefore, in the process of working with him, you must be careful to avoid overspending of the material;
• if the tile under a brick is laid in the kitchen, the width of the joints can be quite large - 8-10 mm. This will significantly reduce material consumption;
• the use of scraps of tiles is permissible, however, it should be done as far as possible in the lower part of the wall, or in those areas that will later be covered furniture;
• in the process of tiling it must be pressed into the surface of a rotating motion to all the surplus glue tabs on the sides. In the future, they can be used for sealing.

Important!The rate of curing of the adhesive composition that is used for plaster tiles - 30 minutes. It is extremely important to have time for this time to make amends for all the seams and to remove any excess solution.

Finishing plaster tiles involves polishing jammed joints. It should be borne in mind that the additional correction of joints need to be sure, as in the drying process they tend to change color. To give the desired coating appearance space tile coated with latex paint and then painted.

Should I buy gypsum tile under a brick: the cost of the material

If you wish to buy gypsum bricks are designed for finishing and veneer surfaces, it is necessary beforehand to familiarize with the prices that offer a variety of popular manufacturers.

For example, the price of a brick tile for exterior finish will be much higher, given the fact that in the there is a plurality of elements designed to improve the characteristics of the material and make it more sustainable.

Prices gypsum tile under a stone for interior decoration starting from 260 rubles per 0.5 m² and may increase depending on the complexity of the invoice and the manufacturer. Although its price is rarely more than 750 rubles. At this price you can find gypsum tile of almost any complexity and colors.

How to make your own hands tile plaster: manufacturing technology

As you might guess from the name, one of the main ingredients of such tiles - plaster. It is recommended to use the material, labeled as 10 gf, because its characteristics meet all requirements. Plaster of this brand is strong enough and has a long service life and is resistant to stress.

If for some reason to buy this material could not be possible to further condense any other, adding a special hardeners, designed to improve the properties of the material. But even in this case, it is worth considering that such a brick wall tiles, not used for exterior finish.

So, we try to figure out how to make plaster home, suitable for wall surfaces and at the same time quite resilient to external shocks. The following materials can be used for this purpose:

• gypsum;
• plasticine;
• paraffin (you can use regular candles);
• cardboard box;
• silicone sealant.

Of course, the easiest way to take advantage of the finished silicone molds for tiles, which will significantly simplify the manufacturing process and reduce the time spent on it. But generally do form gypsum tiles can be independently, using sculptural clay.

In order to make the form, clay sculpture is rolled evenly whose thickness should be around 20 mm. Then, using the most ordinary brick, inside doing impressions, which will serve as forms for low tide.

Also, to create a form for a decorative stone with their own hands, you can use paraffin. It must be melted and poured into a box of the appropriate size, which can enter the brick. Once the wax is completely hardens, it can be removed and used as a form. The same method is suitable in the case of working with silicone sealant.

How long will the production of gypsum tiles under the stone depends on the number of forms to be prepared. It is better if they will be enough. Then it takes less approaches to cast the required number of elements.

The very process of manufacturing gypsum bricks for interior decoration is as follows:

• gypsum need to pour into a container and add water to obtain a solution creamy consistence;
• forms in which the gypsum will overflow solution for solidification, should be pre-greased or oiled to further elements can easily be removed;
• pouring the composition into a mold, shake it gently to distribute the solution evenly.

Important!If you notice the presence of water, which is separated from the gypsum after the solution has been mixed, it should be discarded and a new cook again, following all the instructions prescribed by the manufacturer.

Plaster tiles - excellent facing material that can significantly transform the interior of the room. It can be used to issue an original niches protrusions stairwells and zonirovat space. The main thing - the right to choose its location, to avoid contact with moisture and high mechanical loads. In this case, the decorative tile under a brick over the years will enhance your decor.