Attachment to drill for metal cutting, sharpening drills and other

Performing construction or repair work, it is often necessary to cut the metal workpiece. To do this, use the special equipment in the form of milling cutters, grinders or hand shears for metal. However, it is not always at hand. To cope with this task can use the attachment on a drill for metal cutting, which performs cutting of products of small thickness.

Variety of nozzles on a drill

Many artists used to use a drill for its intended purpose, namely to drill holes. But not everyone knows that this tool could be turned into a multifunctional device, complementing its special nozzles, fittings and supports, that will drill a universal and irreplaceable in any work.

By means of special nozzles for drills, which can be bought in any specialty store at an affordable price, you can perform drilling holes all possible diameters, cutting, grinding, polishing, twisting, mixing, and milling. There are also head-pump on a drill designed for pumping fluid. The prefix for plucking chickens is simply indispensable in the household. With correct and proper use of additional attachments result is not of inferior quality, as well as at using a special single-purpose devices, but the cost of such a universal tool is at times below.

As intended, all existing nozzles are divided into:

• equipment for drilling and crowns;
• Scissors for cutting metal nozzle;
• stops;
• angular tools;
• grinding and polishing attachments;
• tooling for milling wood and metal;
• sharpens tools;
• perosemnye nozzle.

When working with any attachment on a drill is necessary to observe safety rules:

• Attachments must be securely fastened in the chuck tool;
• drill must be held with both hands, which is especially important for high-end models;
• constantly adjust the pressure tool;
• work in personal protective equipment;
• after completion of the work for a few minutes, do not touch the drill bit in order to avoid burns.

What are the nozzles on the drill for metal cutting

Equipped with a special nozzle for cutting metal is converted into a conventional drill or punch shplinton. The device pierces the metal product through the implementation of multiple reciprocations of the internal die cavity. The result is a smooth line of cut width of 3.1 mm while maintaining the protective layer on the surface of the metal plate.

Important!The maximum packing efficiency is achieved only when the complete with electric drill, speed of the cartridge which is not less than 2700 rev / min.

metal attachment on a drill can cope with such a sharp metal products:

• aluminum, to a thickness of 2 mm;
• made of brass, copper, zinc, steel and galvanized iron sheet, 1.5 mm thick;
• made of stainless steel and 0.8 mm thick.

Using the nozzle on the drill for metal cutting has a number of advantages:

• Res formed has high quality;
• there is no need to constantly purchase supplies, which saves financial resources;
• It provides high performance in cutting metals;
• Device versatility;
• equipment convenient and easy to use and maintain;
• nozzle may be used for electric and pneumatic drill;
• by means of the nozzle can be carried out cuts of any shape.

Despite all the above listed advantages, to get high-quality cut, to work need some skill and dexterity.

Popular models of nozzles

Today there are many different models of nozzles to drill through which you can perform not only for metal cutting in a straight line, but also to make curly cuts. This is necessary in the performance of the ventilation duct installation, roofing, gutters. Using the nozzle allows you to cut in any position without making preliminary settings.

Types of baits:

• punching head "Steel beaver" is used to cut metal tile and profile any flat sheets;
• universal nozzle "Cricket" is used for cutting of profiled metal, polycarbonate and plastic;
• special nozzles to perform curved cuts and figured models presented EDMA Nibbek, ACRO YT-160 A, Sparky NP 1,8 L, which differ in the thickness of the processed sheet.

Trimming scissors on a drill "Steel beaver"

Classical nozzle on the drill for cutting metal or any flat sheets of metal in the form of a freely rotating shaft in a bearing with fixed eccentric works on the principle of a crank mechanism with the difference that the energy is supplied to rotation.

A complete tool for cutting has a supporting portion disposed on the frame and movable - coupled with an eccentric. It is the moving part reciprocating motion during rotation of the shaft. The obligatory design element is the handle which is fixed perpendicularly with respect to the spindle rotation axis. During load increase occurs torque reaction torque by which the drill is moving relative to the nozzle.

It should be remembered that the tool must be positioned vertically relative to the workpiece when performing cutting. Otherwise, it may damage the product and operator injury.

The device resembles a pair of scissors for metal. Nozzle on the drill used to cut flat products or profiled sheets with large radius bends. cut line can be easily controlled. In operation, the tool protective coating layer is not burned, thus eliminating the formation of sparks and the probability of occurrence of burrs. You can perform continuous cutting of products of any length. Buy attachment on a drill for cutting metal and flat metal sheets can for 1600 rubles.

Cutting the sheet is performed at a speed drill 1500-3000 rev / min. Cut angle is 360 degrees, the minimum radius - 12 mm. By means of the nozzle "Steel beaver" can perform cutting:

• copper or aluminum sheet 2 mm thick;
• steel - not more than 1.8 mm;
• Stainless Steel - 1.2 mm,

Useful advice! "Cricket" type must use expanded scissors for cutting shaped sheet with bends of small diameter.

Nozzle on the drill "Cricket"

Nibblers "Cricket" scissors got their name from the characteristic noise during operation. The nozzle is similar to the previous model, but has a different structure of the operation member, consisting of two cutting heads. The operating principle of the nozzle "Cricket" is similar to the office puncher. The metal in the vibrational movements of the cylindrical pin with a high frequency extruded neat hole. Due to translation along the marked line manages to get a clean cut.

"Cricket" tip scissors are used for cutting thin metal sheets and profile, and polymer thin-sheet products up to 2 mm thick. Work may be performed in the horizontal and vertical planes. Thanks to the possibilities of the instrument to rotate 360 ​​degrees. you can drill a large round holes and perform artistic cuts. Buy attachment on a drill cutting "Cricket" metal can for 1500-4000 rubles on average.

The tool can cut metal with ribs and a variety of specialized vyshtampovki two ways. A first embodiment involves the repetition of the surface profile, the edge rounding. It is used for products with an average radius of curvature. Is used for cutting metal cutting another embodiment, according to which the tool moves along the stiffeners without diffraction profile sheet.

Before you buy a drill tip to "Cricket", should be considered the main drawback tool. Because the punch tips has a diameter of several millimeters, the product formed when cutting section of a certain width, which leads to a certain material expenditure. The result is a steel wool with sharp edges in the shape of a crescent, which should be immediately disposed of for security reasons.

Useful advice! When working with the tool should not be shod soft shoes.

One of the most popular models is the "Cricket" head-scissors for metal up to 1.6 mm 14210 Anchor. The tool is capable of slitting the metal sheet is thick enough in the forward direction or curved. Buy nozzle on metal cutting drill can be 1300 rubles. The main feature of the display is that formed during cutting path width of only 1.6 mm, which provides a sufficiently good level of saving material.

The device may be mounted not only on the drill, but also on the screwdriver. Nozzle for cutting metal has low weight that does not increase the weight of the electrical appliance. Includes removable handle, due to which increases the accuracy of the work. The DVR has a low noise level due to its special design, which makes working with it more comfortable.

Nozzle on the drill for sharpening drills

This device consists of a plastic housing, inside which rotates a special shape emery wheel. It allows to form the desired sharpening angle on the working part of the tool. Circle planted on a shaft which is connected to a special drill collar. He activated when the instrument is turned on.

Many current models have on the end cap housing, which is a hole different diameters for sharpening drill bits of various sizes. These holes are formed so that the sharpening element in contact with the abrasive disc pad in position.

The process of sharpening of the drill is performed as follows. The product is inserted into the hole cutting part corresponding to the diameter of the nozzle. After starting the drill emery wheel starts to spin, performing grinding half of the drill. Further product is inverted in an opening of 180 degrees, and the procedure is repeated. This sequence of operations is performed several times until until you have achieved the required parameters of the cutting part of the drill.

Nozzle for a drill for sharpening drill bits, which can be bought for an average of 350-500 rub., Has 15 holes with diameters of 3.5 to 10 mm. Products can sharpen at an angle of 180 degrees because of the special shape of the stone. The simple design of the device allows you to work quickly and without any special skills.

Related article:

Disk cutting machine for metal: product classification

Types of structures, their characteristics and features. Review of the best manufacturers of machine tools. Comparative pricing characteristics.

However, be aware that the device is designed for sharpening cutting edges podsevshih. For a complete sharpening badly worn items sanding disc will not last long.

Useful advice! Buying nozzle particular model should take into account the diameter of the drill chuck.

There is also another type of additives. This nozzle on the drill for sharpening knives and scissors, which is represented as two circles emery, beached on the shaft and located at a certain distance from each other. The price of this device is around 250 rubles.

Nozzle on the drill grinding

By means of the grinding cup to drill removes old coatings, corrosion, chipping, burrs from the product surface. It is used for grinding the edges of the glass, metal parts and products made from other materials. Due to the small size of the equipment can be treated remote sites. The average cost of the product is 500 rubles.

Drill Bits for grinding used for preliminary rough training grounds for future polishing. It is formed as a rod, on which is fixed a grinding material in the form of sandpaper or brushes. There are various types of such devices which are employed for specific tasks.

Cup nozzle on the drill for grinding wood or other material presented rod fixed to the chuck, and the housing in the form of cups filled with light or stiff bristles. The housing is made of metal or a durable and lightweight plastic. Usually such nozzle is used to remove an old coating or rust from a surface.

Another variation is a circular nozzle for grinding metal drill, wherein the bristles grinds material as brass or steel wire brush is directed to the edges of the disk from its center. Use this additive should be very careful, because you can easily damage the coating. Cymbal nozzle has a movable or stationary rod that is attached to the cartridge. To it is attached sandpaper using Velcro.

Useful advice!Better to buy a nozzle with a movable rod, which allows you to adjust the angle of the drill, while seamlessly follow the contours of the material.

Mop head or the flap stem provided on which are fixed pieces of sandpaper or other abrasive material. It is used for performing radial applications or surface treatment with a complex profile. It can also be used for grinding of holes as carbide cutters or cutters which operate on the principle of a file.

Polishing abrasive stones mounted on the rod, are used to remove sagging, barbs, boring holes or leveling of the weld.

Attachment on a drill for polishing

After grinding the base need to give it a smooth surface. This is done by polishing using special nozzles. They can be made of felt, wool, foam or felt. According to the degree of softness can be hard, soft, super-soft and relief. In the method of fastening the nozzle are distinguished with the rod, and with Velcro-lock holder. Polishing discs used fan or disk nozzles, end devices are used for openings. The average price of the product is 250-300 rubles.

Many motorists have in their arsenal attachment on a drill for polishing the car. However, when choosing this product should take into account some special features:

• the device should be of high quality and professional;
• for effective and safe treatments polishing the maximum number of revolutions of the drill is not should be greater than 3000 rev / min, which is indicated in the device characteristics, otherwise the paint just burns;
• head should be from well-known brand;
• the device should not be part of the cost of products;
• polishing each individual car parts, use special nozzles designed for these purposes.

The process of polishing the vehicle using a drill is extremely difficult and time consuming process requiring specific skills. If you have no experience, you must first learn all the intricacies of this process, to master the basic techniques presented in the ads on the Internet. Better to start with a discreet body sites. The tool is adjusted to the desired settings to create the required number of revolutions. The nozzle should not be too much pressed to the surface to high temperature to incinerate paint.

Nozzle on the drill for plucking poultry

Plucking the bird is very time-consuming process, especially when you need to process multiple carcasses. Therefore, many farmers are constantly in search of new solutions not only to facilitate the work, but also to reduce the overall time. perosemnaya nozzle on the drill has been specially developed for this purpose, which in a few minutes remove feathers from poultry. It is similar to a brush for washing dishes, but here are the silicone bristles fingers that during rotation of the shaft is pulled out from a carcass feathers. The bird with the tray by different parties.

Nozzle on the drill for plucking poultry, which can be bought for 1500 rubles on average. processing poultry carcasses in just 2-3 minutes, without leaving a single feather. The result is a smooth intact skin. Device is effective not only for the treatment of chickens, but also gives a good result when plucking geese. Attachment on a drill can be used not only fresh, but also for frozen poultry.

Useful advice! Before using the nozzle carcass scalding with boiling water is not recommended, which will reduce the efficiency of the treatment process.

The main advantages of perosemnoy attachment on a drill, which can be bought in any specialty store, is the speed, simplicity and flexibility of use that does not require specific skills and further processing of the carcass before plucking. A major shortcoming of the device is that after the process of mechanical damage remain on the carcass, which impairs its appearance. Therefore, in the case of poultry for the purpose of sale, pluck it must be manually.

Other species of nozzles

When you can not make a hole in normal mode, you must use the angular attachment for drills. The working head of the device can be rotated at different angles relative to the rotational axis of the drill chuck. The main drawback is the increased release snap the risk of failure of the drill. Therefore, the most popular is considered a corner nozzle for drill 90 degrees, which is fixed on the neck of the drill. Product price is 800 rubles on average.

For artists who are engaged in manufacturing of furniture, very popular are the heads-cutters of various kinds. They may be relief and pointed. They can be used to make grooves of different shapes and depths, handle holes and remove defects. The cost of equipment is in the range of 350-450 rubles.

To the stirring solution of different consistencies nozzle-mixer is used for drilling, which is chosen taking into account the density of the solution. Thus kneading glue, putty and other liquid fluid mixtures are applied spiraling device which eliminate spattering of the solution. For mixing concrete used nozzle with a tail in the form of a hexagon. Kneading mixtures using this nozzle will be performed quickly and efficiently. However, in order not to reduce the efficiency of the device should withstand the volume of the mixture for kneading. Price nozzle is 500 rubles.

Useful advice!When choosing a mixer attachment for drill, you must take into account the power tool. Increased pressure can lead to burn out of the winding.

Indispensable in the concreting of a nozzle-vibrator for concrete drill, which price is about 900 rubles. It is used for compacting the concrete mass during its installation, namely designed to remove air bubbles and a layer of fresh concrete. For the power drill attachment requires no less than 1500 watts.

To perform Woodturning handyman simply can not do without a nozzle on the drill to cut a tree, where the average price is 2000 rubles. You can use a nozzle-pump for pumping liquids.

A wide selection of different baits, jigs and rigs drill makes a versatile tool, which is indispensable for carrying out repairs and other economic needs of household conditions. This is a simple and optimal solution that will avoid buying expensive specialized power tools.