Acrylic bathtub: size, shape, and an overview of popular products

Today is very popular among buyers enjoyed acrylic bathtub: size, variety of forms and high operational characteristics give the product of the first acrylic rank plumbing devices. About the features of the products, the rules for choosing its size, top producers and production models can be found in this article.

What is an acrylic bathtub

Acrylic bathtub represents sanitary product made of a thermoplastic polymer - acrylic, with the addition of plasticizers, dyes and stabilizers, which improve the technical and operational properties products.

In turn, the bath can be made of 100% acrylic or combined extrusion polymer. In the first case, the product has better performance. They are more resistant to erosion and less subjected to deformation. Two other options have lower moisture-proof performance, due to the technical features of the material and manufacturing technology. However, these products are of a lower cost in comparison with baths of 100% acrylic.

Bath of acrylic has the following operational characteristics:

• High level heat, which contributes to the water slowly cooling to room temperature;
• small weight of the product, which facilitates the transport of bath and an independent installation of the product;
• variety of sizes and forms of products as a result of the fact that the polymer is easily processed at the manufacturing stage of production;
• a large range of colors and a variety of stylistic configuration allows product to enter into any interior;
• smooth and level surface is characterized by the self-cleaning effect, allowing contamination of product with freely slide walls are not absorbed in the body;
• after contact with the water surface does not yellow and does not tarnish, which prolongs the life of the product;

• equipping baths with various additional functions: hydromassage, aromo-, chromosome, color therapy, water pressure regulation, automatic disinfection of the surface;
• the ability to manage system operation using the remote control;
• different interior equipment in the form of bath seats, headrests, handles, shelves.

Despite the advantages of acrylic bathtubs have drawbacks. The product has a low mechanical strength, so a small mechanical impact may cause damage to the bath. Cost of goods exceeds the price of steel and cast iron counterparts, which are also superior to acrylic for strength and durability. Acrylic bathtubs require delicate care. When exposed to the surface of the article with an abrasive cleaning agent formed scratches that spoil the appearance bath.

Note!Device must establish a special frame or the reinforced frame, which reduces the likelihood of damage to the device under considerable loads. In this case, it is appropriate to mount the screen under the bath, the size of which is selected depending on the size and height of the base product.

Variety of acrylic bathtubs

Of durable plastic and polymer product can create any configuration. Rounded models conquer purity tiered steps lines, projections and armrests. Acrylic bathtubs can have this form:

• corner;
• oval;
• round;
• rectangular;
• polygonal;
• asymmetric.

Traditionally it is considered a rectangular acrylic bathtub, photos clearly confirm this. It fits perfectly with bathrooms typical apartments. Despite the simple design, the product of this form provides a maximum level of comfort. Baths of cast acrylic mounted along one of the walls, depending on product size and layout of the room.

Very popular today enjoy as proof photo, corner acrylic bath, sizes and prices are available in a wide range, from 12 thousand. rub. and reaching 700 thousand. rub. It provides the ability to install the product in a room of any size with a different layout, without cluttering it. The bath may be left-handed or right-handed orientation. Free product side can be concave, convex or rectangular. For larger rooms, you can choose an overall model that resembles the shape of an isosceles triangle.

Useful advice!Corner products can be purchased bundled with shower or equipment for the soul of Charcot.

The oval design can give a room elegance and respectable. However, thanks to the smooth lines of the product even smaller size will take up a lot of space and visually reduce the size of the premises. These baths are advisable to install in the spacious rooms.

Acrylic round shape model can hardly be called high-grade sanitary ware products. To a large extent this is a luxurious decor elements that will look impressive on a small podium. Round bath often have impressive dimensions, and make up to 2 m in diameter. Products are often equipped with additional functions, through which can be used as a mini-pools for at home spa treatments. Made this acrylic bathtub on Custom sizes.

Useful advice!When you need to enter the sanitary unit in a room with a complex configuration should choose an asymmetrical acrylic bathtub. The spacious flat areas can install the product of any shape and size.

Acrylic bathtub: size and product configuration

Just a couple of decades ago, in the construction market could meet individual custom options of sanitary products. Manufacturers produced iron and steel tubs of strictly regulated size: 0,7h1,5 m 0,7h1,7 m, m 0,9h1,8. The assortment of products began to increase rapidly after the onset of plastic acrylic. Due to the material properties of the product can be given any custom size and unusual shape.

When choosing a product is important to examine what are the sizes of acrylic bathtubs. Today, manufacturers offer a long range of sizes ranging from compact models to overall mini-swimming pools. Standard size rectangular acrylic bathtubs are considered dimensions: length of 1.2-1.8 m, 0.7-0.8 m width.

The optimum height of acrylic baths is 0,65-7 m. The most popular is a device the size of 1,6h0,7, which is suitable for most bathrooms in homes typical layout. It appeared on the market 1,2h0,7 compact models that can fit perfectly in small premises where space is limited. And for large bathrooms 170 can set the size bath at 120 cm. However, there are more dimensional models that can be classified as small pools.

Very popular acrylic corner baths. bathroom size symmetrical models starts from 0.9m and reaches 1.8 m. Dimensions of asymmetric products are in the range of up to 0,6h1,2 1,7h1,9. the biggest bath size is 1,5h1,9 m, which can comfortably accommodate two people.

How to choose the right size bath Bathroom

The correct choice of plumbing devices based on proportionality between the dimensions and the size of the bath room. For small rooms it is advisable to install the compact models, which do not clutter up the space and make it possible to install other furniture. In this case, the ideal solution are acrylic bathtubs and size 1,4h0,7 1,5h0,7 m. For larger rooms, you can choose any model of 1.2 m wide and 1.8 m long.

Useful advice!For rooms of rectangular shape is appropriate to establish the same bath, placing it along the wall, and for square rooms is better to choose a corner model, which can be approached from either side.

Another criterion when selecting the optimal size baths are considered the physical characteristics of all family members. It is important to achieve harmony, so that everyone can enjoy water treatments and get their maximum benefit, without experiencing discomfort. The dimensions of the bathroom must be capable of reclining state in which the maximum muscle relaxation.

The most popular lengths for acrylic baths are considered the value of 1.4; 1,5; 1.8 m, and depends on human growth. The optimum width is 0.9; 1,0; 1.2 m, which provides comfort and does not restrict movement. The bath height of 0.65, it's best to go 07M. A recess product not less than 0.5 m allows adult easy to keep the water head in the reclining position.

How to buy high-quality and durable acrylic products

Bath is a device with a long period of operation. Therefore, when choosing products should be guided by the following recommendations to eliminate the possibility of buying expensive, but quality product.

Related article:

Corner bath: size, price and form of popular models

manufacturing materials. Options and functionality. Installing a corner bath. Photos of popular models and the cost of products.

When choosing a particular model is necessary to study the thickness of the acrylic layer. To do this, the usual flashlight to shine on one side of the bath. If, on the other side of the product is illuminated by the light bath wall is too thin, which reduces the lifetime of the device.

Important!Qualitative acrylic bathtub made from webs with a minimum thickness of 5 mm.

The next step is to examine the number of layers of reinforcement. They can be seen on the walls of the edge. Layers resemble the rings to cut down the tree. The larger the number, the stronger the product. This is followed by the body to tap. On the qualitative performance of the chosen model will testify hollow sound. If the bath has an unpleasant odor chemistry, it is made of cheap material. During the hand over the surface of the product should not be felt by dents, scratches and other defects. Carefully inspect the bath should be in color. It should be smooth. If on the surface there are visible stains, this is evidence of the defective product.

Acrylic insert into the bath: what it is

When you can not buy a new bathroom, and old can no longer be exploited, it is possible to perform the restoration. One of the most popular, effective and reliable method is the technology of "acrylic insert." This solution will save costs associated with the purchase of a new acrylic bath, at the same time will provide a quality product with similar characteristics.

acrylic insert is a pressed sheet of the sanitary acrylic, which is formed in shape and size of the old bath at the factory and is glued to it by means of special components. Box made of steel and cast iron tubs of standard sizes. Length can be 1.5 or 1.7 m, width 0,57-0,61 m amount depending on the width of the bath. The depth varies 0,4-0,45 m.

When installing the insert into an old thicket surrounding the overflow and drain holes are mounted silicone ring, to achieve sealing of the bath surface with acrylic liner. On the old surface of the product is applied to a two-component silicone sealant or foam. Next embedded acrylic paste, and you connect to the drain and overflow system. Bathtub filled with water to allow the acrylic insert to fully settle on the base without leaving the voids. This creates maximum strength and stability of the new product. At the end of 10:00 bath is suitable for further use.

The use of acrylic liner can not only get a perfect appearance after the restoration of the bath, but also creates so the title of "thermos effect". The resulting rapidly heated bath and slowly cooled, which contributes to a longer keeping the hot water in the bowl. The product has a sufficiently high strength due to the fact that the outer surface of the insert is covered with fiberglass. The term acrylic insert operation is not less than 15 years with the correct care product.

Important!Acrylic insert should not be installed in steel and thin-walled cast iron bathtubs for the reason that the bowls of the structure can be deformed.

The average cost of an acrylic liner installation is 5-7.5 thousand. rub. taking into account the price of the material. It depends on the size of the product and to perform additional activities related to the installation of a new drain trap and dismantling the tiles, if the bath is built into it.

Manufacturers of acrylic baths

Today's construction market a wide range of different shapes and sizes of acrylic bathtubs. And the price for the product in the first place depends on the brand. Among the most popular companies that have proven themselves in the world market, you can select from the following manufacturers:

Foreign companies:

• Vagnerplast;
• kolo;
• Pool Spa;
• Ravak;
• Cersanit;
• roca;
• Riho.

Russian companies:

• Triton
• Aquanet
• Mark 1;
• BAS.

Vagnerplast Czech company is a pioneer in the manufacture of acrylic baths technology, which uses high-quality cast acrylic English production. The product range is presented in a wide range of sizes and shapes, and is focused on any budget. Here are rectangular product length 1.5-2 m, a width of 0.7-0.9 m, and corner model dimensions 1,4h1,4; 1,5h1,0; 1,6h1,0 m.

Acrylic products from the Spanish producer Pool Spa are characterized by high strength, which affects the cost of products. The company offers a wide range of baths, a length of 1.2-2.0 m and a width of 0.7-1.2 m, and additional accessories. The most popular today are acrylic bathtubs, the size of 1.2-1.9 m in length and 0.7-1.4 m in width, from the Czech company Ravak. Products are of high quality performance, good handling properties, attractive design and reasonable cost. The company provides the longest warranty period of service that is 12 years old. The price of products is 10-400 thousand. rub.

Another manufacturer of quality products made of acrylic at an affordable price is a Polish-Romanian company Cersanit. The manufacturer catalogs are models of different configurations, a length of 1.5-1.7 m, 0.7-1.0 m in width, equipped with additional functions besides the hydromassage. Cost of products is in the range 4-60 thousand. rub.

The Spanish company Roca is considered one of the best manufacturers of high quality acrylic products. Years of experience, the use of the latest technology, high-quality raw materials, modern European equipment allows to produce a wide range of products, designed for any request consumer. The design consists of acrylic bathtubs carcass built, increasing the wall thickness of the product. This allows you to be strong and durable and long-lasting device. The manufacturer produces a product length 1.3-1.9 m, width 0.7-1.5 m. The cost of baths is in the range 7,5-120 thousand. rub.

Riho Dutch company produces a wide range of products, which are assembled in series with the names of geographical objects, which includes product length 1.4-1.7 m, width 0.9-1.4 m. The baths are made on the modern German equipment with the assistance of the British components. Product cost is 9-85 thousand. rub.

Domestic manufacturers of acrylic baths

First in the ranking of acrylic sanitary ware products manufacturer is the company Triton. Since 2011, a new technology introduced in the production - manual molding, which allows not only to create a unique product configuration, but also more wear-resistant and durable. This is made possible thanks to the polyester component in the composition of the product. There products are manufactured in length 1,2-2,05 m, width 0.7-1.5 m.

Acrylic bathtubs are made on the modern American equipment using thermoforming technology from Australian acrylate. Despite the complexity of the process, the finished products are characterized by strength, dimensional stability, durability. In the models with hydro massage function, metal nozzle is used, expansion joints, pump, which ensures long service life of products. bath cost is 6-95 thousand. rub.

The main competitor of the company Triton is equally well-known manufacturer of Aquanet, which offers a wide range of acrylic sanitary ware of different parameters and configuration. Dimensional line is predelah1,5-1,9 m in length and 0.7-1.2 m wide. The products are of high quality and optimum pricing. Cost of products is in the range 8-35 thousand. rub.

BAS company in the manufacture of acrylic products using the method of vacuum forming. Purchase of the case in Germany, the Czech Republic and Spain. The product range starts from classical models of economy-class small size, with a capacity of 130 liters, and ends bulky containers original configuration, a capacity of 250-615 l, further hydro- and manned aeromassazhem. Here are presented the bath length and a width of 1.2-1.9 m 0.7-1.4 m. Premium models equipped Antibac antibacterial protection on the basis of ions silver, which prevents the growth of mold, and pathogenic fungi, and thus allows the product long time to keep their original view. baths cost is in the range 6-45 thousand. rub.

For the production of sanitary products, the company uses the German 1 Mark cast acrylic, which allows you to create a strong and durable product at an affordable price. Most models have a hydro-massage function and neon lights, allowing you to fully enjoy the water procedure. The company produces baths length 1.3-2.0 m, and a width of 0.7-1.3 m, and provides a guarantee on their products for 10 years. Buy this product from domestic producers can be from 7 to 50 thousand. rub.

Rating acrylic bathtubs: dimensions, photos and prices of products

Among the most popular premium models can be identified acrylic bathtub Cersanit SANTANA 170, $ 7 thousand. rub. This product is rectangular dimensions 1,7h0,7h0,41 m, equipped with wide comfortable bumpers, armrests and headrest. The bottom of the bath is covered with a special compound anti-slip, which reduces the risk of injury.

Another budget model is rectangular acrylic bathtub Roca Hall size 170 × 75 cm. The product has a wide collars around the perimeter, which allows you to store personal care products and other accessories. baths price is 12.5 thousand. rub.

Marketable corner bath model is made of acrylic Aquanet Graciosa R, 150x90 cm size which could be performed with right or left orientation and supplemented hydromassage, chromotherapy and underwater backlit. Product price is 13.5 thousand. rub.

Among the high-quality products can be isolated rectangular acrylic bathtub Riho Future 1,7h0,75 size and capacity of 180 liters. Bowl oval shape, equipped with a wide sloping headboard and comfortable lateral grooves that makes it comfortable to take water treatments. Product surface is covered with a special gel that protects against scratches, holes, chipping and fading. Product cost is 16.5 thousand. rub.

Second place goes to a corner acrylic bath size 1,5h0,75h0,57 m Ravak Behappy. The product has a non-standard configuration in which one part is narrowed. This allows you to set the tub in a small room. The device may be equipped with additional capabilities. bath the cost is 25 thousand. rub.

Popular model is the product BAS Nicole. Price hydromassage baths 1,6h1,0h0,5 m size is 36 thousand. rub. Here came together high quality and reasonable price. The small dimensions allow the product to enter the bath in a small room.

Today's construction market a wide range of acrylic baths of various shapes and sizes. Before you make a choice in favor of a specific model should be familiar with popular manufacturers and explore the characteristics of the proposed products.