Wall panels for the bathroom: a way of interior decoration

Repairs in the bathroom has two objectives: to make the room pleasant, aesthetic and design it materials suitable for use in humid conditions. the first task will not run without the implementation of the second plan. With all the necessary requirements are met by the wall panels for the bathroom. It is this finishing material can for a long time maintain unchanged the look.

Panels for bath room as a special decorative finishing material

The panels for the bathroom - fairly recently appeared material. The first version was used in 80-90-ies of the last century. They changed washable wallpaper and vinyl tiles, which, though made it possible to effectively care for use, though not for long retain its aesthetics. Yes, and the process of registration of walls required the use of high-quality special adhesive mixtures and flat base.

Plastic panels virtually spared from these difficulties that arise in the course of finishing. They also significantly surpassed wallpaper and vinyl for durability and preservation of aesthetics, ease of care. Decorating the bathroom wall panels does not lose popularity and today it is constantly reinforced by the emergence of new species.

This material can be attributed to specific types of finishings. In addition to decorative, it attaches to the premises, is carried out also protect the walls from moisture. Features panel installation consist in the fact that they are doing enough hermetic liner with water-resistance of the material itself. Decorative treatment when you make a bathroom contributes to the implementation of various design ideas. The set of high performance and aesthetic characteristics allows wall panels is a great decorative materials.

The main types of wall panels for bathrooms

The main requirements that apply to wall panels for the bathroom, - moisture. It is this qualitative characteristic significantly reduces the number of cladding coatings that can be used for decoration of the premises. The main types of materials used in the manufacture of panels:

1. PVC - polyvinyl chloride or a thermoplastic polymer. It is created from petroleum particles. Various additives, modifiers allow the material to be more or less resistant to mechanical stress, UV light, temperature, and so on. D.
2. MDF (fine fraction), - a plate made of wood dust without chemical binders having a durable waterproof coating.

If you view the photo panels in the bathroom, presented on the internet, visual fail to distinguish between types of material. Particularly evident during operation. PVC panels differ low price. You can choose the budget option with an interesting decoration. These panels are characterized by:

• antistatic (not attract dust);
• moisture resistance;
• heat stability (do not respond to temperature changes);
• Care simplicity (not require the use of special detergents).

Wall panels made of MDF has all the above characteristics. In addition, it should be noted that the basis of this type of material is also a good heat and sound insulator.

Useful advice! The walls in the bathroom, with the external situation, that is not an internal designs, better cover plates of MDF. They will contribute to the conservation of heat in the room bathroom.

Apart from the quality of the material used, the panel also differ in shape, and manufacturing method of mounting. Distinguish rack, tile and sheet types.

Rack panels for the bathroom: the sizes and types

This type of material is a strip, which are mounted typesetting manner. These panels are also called plastic lining. Decorative processing does not require a certain adjustment of the figure, so collect the items is quite simple.

The panels for the walls in the bathroom in the form of strips may have the following dimensions:

1. The thickness varies from 8 to 12 mm. This index greatly affects strength. The thinner panels, the more they are exposed to mechanical stress.
2. The width of 125-400 mm. From it depends largely on the method of installation and the overall decorative effect. It also contributes to a certain extent the visual perception of the space (room expands, and increases the height t. D.).
3. The length of the strips varies from 2400 mm to 5900 mm. The correct choice of material depends on the length of economical use, appearance and coating tightness. No need to attach the height band contributes to the aesthetic appearance and prevents unnecessary additional compounds that are difficult to hermetically close.

The photo bathroom of PVC panels can be seen both vertical and horizontal arrangement of the rails. Possibility of installation of the material in different ways gives more freedom the designer's creativity and contributes to the emergence of interesting decoration ideas.

The use of modern tile panels in the bathroom

An interesting embodiment of the coating of walls in a bathroom are tiled panels. They can be either square or rectangular in shape. Standard sizes of active material has no side plates can be either 250 or 900 mm. The thickness of the product is the same as that of the rack, - 8-12 mm.

Characterized by the kind of finishing a wide variety of decoration. This is confirmed by photo panels in the bathroom, placed on the Internet to design and sell the site. They are presented with the options of products with interesting texture of the outer layer, deep color tone, different patterns, in that including simulating tiles, types of natural stone and other natural materials, as well as floral and other interesting ornaments.

The process of coating the walls views tiled panels characterized by certain features. First of all, it is necessary to pay attention to each piece of material: put, track status, aesthetic issue joint.

It was the last time is the most difficult. Tiled wall panels for interior decoration in the bathroom more frequently mount fit together (have connecting elements). When perfectly flat walls compound aesthetic, but even slight irregularities significantly spoil the appearance.

Useful advice! Irregularities joints can close the overhead bars. Their use should be considered even in the preparation of the project design bathroom design.

Sheet panels in the bathroom: the high speed and furnish a minimum of seams

Comfortable and quite often the preferred kind of finishing material for bathrooms are sheet panels. They can have a variety of textures of the upper layer and a different color scheme, different matt and glossy surface. Designers have developed a large number of panels with imitation of various materials.

Standard sizes of commercially sheet panels:

• 1035 × 500 × 4 mm;
• 2700 × 500 × 8 mm;

• 2700 × 250 × 8 mm;
• 3000 × 500 × 8 mm;
• 3000 × 250 × 8 mm.

Certain types of panels simulating a mosaic may have dimensions 955 × 480 × 4 mm. These parameters contribute to a more convenient placement of sheets on the walls during installation.

Wall panels in a bathroom in the form of sheets typically made without coupling elements. Because the joints must also be sealed with the molding (if necessary only a decorative effect) or other overhead splines facilitating a stronger bonding.

Panel sheets are easily cut carpenter's knife, which greatly simplifies the installation work when you make a bathroom. Large dimensions of the material provides high speed performance finishes.

Useful advice! When using decorative or functional and decorative overhead straps must be sealed the joints sheets of special silicone composition which will create a seam tightness.

The methods and features of installation of wall panels in the bathroom

To design the bathroom was interesting, and finishing work done efficiently, you must properly consider the method of installation. He is best depends on two factors:

• on the shape selected for the finishing material. For example, rack and large size sheets are difficult to glue, and the result may be disappointing inaccuracies vykladyvanii;
• state of the surface of the walls. The presence of irregularities not allow qualitatively to issue a room with no arrangement of the frame.

Picture panels for the bathroom, which are advertising manufacturers and trading companies, the installation recommendations are not given. And by way of finishing the interior shot is impossible to understand. Therefore, the choice is made independently (if the bathroom settling down with their hands) or a specialist, who will carry out the installation.

The main methods of finishing bath panels:

• bonding material to the wall;
• fixing to the frame.

Both variants have both advantages and disadvantages. The latter may be due to the specific conditions or be objective actual result. For each method, you need a completely different set of instruments and consumables.

Gluing plastic wall panels bathroom

Attaching the panels is a fairly simple, fast and trouble-free installation method. This is true only in the case if the wall is smooth. If there are bumps and drops the level of effort should be made to remove them. Cracks and depressions should putty. Protruding parts can be removed with a putty knife. If the walls are concrete, this method is ineffective. You must apply a special cutting tool.

If there is a large amount of wall defects, a better surface is completely sew plasterboard or plaster, and then stick to it panel. Such an embodiment is represented in the photo finish. Wall panels are perfectly mated, and the seams are practically invisible.

The following may be used as adhesives:

• special adhesive composition for PVC rails;

Related article:

Mosaic tiles for the bathroom: variety choice of design and styling

Variety of mosaic tiles for the manufacture of the material. Options basics. Tips on choosing designs and colors. Laying mosaic tiles with their hands.

• glue "Moment-assembly", "Moment-crystal";
• Emfikol 34012A;
• Kleiberit 636;
• liquid Nails.

Useful advice!When covering wall panels by adhesive should not only align perfectly, but also de-dusted surface to remove traces of grease and dirt. Otherwise, the bonding strength may significantly decrease.

The following points can be identified as the shortcomings of this mounting method:

1. In case of damage of the coating panel removed and replaced without loss of a separate fragment overall aesthetics practically impossible.
2. Element with connecting device is difficult to dismantle. At the butt joints after replacing part of the coating remain traces of mechanical damage.
3. During the repair work dismantling glued panels require much time and considerable physical effort.

It should be noted that the absence of voids between the wall and the panels makes last less susceptible to mechanical stress.

Frame method of installation of wall panels for the bathroom

Carcass method involves mounting the wall panels prior execution battens of wood or metal. It should be noted that this type is more suitable for securing the premises where there is no need to save each centimeter have been removed from the wall structure, whereby it steals a certain amount of centimeters the total area. In small rooms such reduction of free space is much felt - and not just visually.

To create obreshetochnoy structure can be used bars size 20x20 mm. They are much cheaper than metal elements. For metal lathing requires purchase profile for UD and the CD loop as guides.

Important! When the structure of the wood battens must be pre-treated bars antiseptic.

The first thing that should be done before the wall design bathroom PVC panels, - perform the layout for the frame. The lower and upper line (considering the plinth) are derived using a spirit level. To be placed vertical elements necessary to use a plumb line. The removal of the frame from the wall must be determined at the serving point.

Fixation screws lathing perform better with a step size of 150-250 mm. Setting profiles (or bars) is first made on the edge of the design, and then in the internal portion. Location of the guide elements inside the structure depends on the method of installation of panels - horizontal or vertical. The panels must be fixed perpendicular to the rails.

Calculation of material in the design of the bathroom paneled room

A very important step in the bathroom design is to calculate the panel material. The procedure is complex and depends on what kind of shape and design of the coating will be applied.

The first variant. The walls are vertically closed rack panels. This type of pattern typically does not require special placement elements. you can calculate as follows:

• perform measurements, allowing to calculate the perimeter of the room;
• obtained by subtracting the digital value of the width of doors and windows;
• divide it by the width of the slats.

With this method of installation is important to choose the length of the water-resistant wall panels for the bathroom. It is worth to buy an option, in which the waste after cutting the top will be minimal.

The horizontal arrangement of rods requires a different calculation:

• compute the area of ​​each wall (or area sutured panels of each wall portion) folded;

• subtract windows and doorway area;
• divide it on one rack area.

Useful advice!In the method of installation, which assumes only the joints in the corners, it is necessary to calculate what would be waste, and taking into account the rail area without the cut-off portion.

On the Internet in the photo finish bathroom PVC panels can be seen reasonableness "stacking" the figure in the corner of the room. If the full fragment does not fit, you must either continue it after a corner cut, or make the same partial section of the panel in the adjacent corners.

When using a sheet and tile panels calculation is performed by dividing the area of ​​walls in the area facing material.

mounting Features panels for bathrooms under tiles

Especially popular are the wall panels for tiling. Many people prefer this type, precisely because visually looks like a bathroom lined with ceramic present. In a relatively small amount of money can make the room presentable and provide it with reliable coverage.

Panels under the tiles often available in the square or rectangular shape (although there and rack versions). If one of the sides has a size of not less than 700 mm, the material may be attached to the frame. For smaller panels need lathing parameters with frequent inner rails that expensive both financially and with respect to time. Small panel easier to glue on the wall.

For wall panels under the tile for the bathroom also has a great importance to the state of the wall surface. Irregularities not only spoil the appearance, but also does not allow both surfaces to glue quality. Unfixed edges of plates in the process to use the premises can be damaged.

Presence simulation suture material can cut in his line, and join with other parts without loss of aesthetics. This makes it possible to compose interesting elements in the decoration of the walls: use friezes, inserts, ornaments, etc...

Characteristics and features of assembly MDF Bathroom

Particularly noteworthy are panels made of MDF. They have a number of positive differences from the fabric of PVC:

• more eco-friendly. The base has no harmful substances in the composition, laminating is made of non-toxic materials;
• much higher degree of strength than the plastic embodiment;
• the texture of the color scheme and diverse.

Confirmation of the diversity of species cover design development of MDF can be found in the photo wall panels for the bathroom, available on the Internet. This wood imitation, likeness transmitted not only colors, but also the structure of wood. This panel, mimic tile, and even options with 3D-image.

Panels MDF often produced large, that is, is a sheet material. Use them better for areas where it is not required vertical cutting. This limited application due to the fact that to perform the cut, like industrial, impossible. Consequently, the joint will be noticeable, greatly affect the aesthetics of finish.

Mount the active material is possible as with an adhesive, and fixing the carcass basis. Mechanical resistance and durability of the outer layer allows this type of panels in durability to rival tile.

Useful advice! When attaching MDF panels carcass method should always be applied to the wall antiseptic.

Wall panels for toilets: application features

When combined bathroom with WC last question design does not arise. If this is a separate room, the design is also worth attention. Many seek to identify a method for coating the walls of the toilet and the bathroom. It is not always justified, since the toilet more often has small dimensions. The use of the frieze, molding, overhead rails makes it visually even less, turning in a box.

The use of water resistant wall panels when placing the toilet is quite appropriate. It is better to choose light colors variants, without a strict geometric pattern. More organic for the room and the matte surface. This is due to the lighting: in a small space, glare can not be avoided.

Given that the wireframe method of installation space is reduced, it is better to prepare the wall for gluing panels. Yes and no voids will help preserve the integrity of the material.

The effectiveness of the use of the toilet wall panels is increased also due to the fact that one is convenient to do the box, closing the communication.

Useful advice! Should not be used when embedding the seams in the toilet area waybill dark or contrasting color with respect to the panels. The presence otcherchivayuschih lines visually narrows the space.

The use of wall panels in the interior: the views of "pros" and "cons"

On the Internet you can often find a negative opinion about the use of panels in the bathrooms. Two main arguments:

• apparently the room looks cheap and rustic;

• environmentally unfriendly material.

Many believe that in time, this type of wall finish will want to replace on a ceramic tile. Most likely, it is the opinion of those who have not managed to create an interesting interior, and just bought the material and fastened to the wall.

Wall panels for bathroom moisture resistant. This quality allows them to maintain a good appearance for a long time. Consequently, in the absence of traces of mechanical damage and proper care, panel lose aesthetics. If at the time of a serious attitude was manifested in the development of the design, the interior will please for a long time.

On the question of sustainability is also worth a reasonable approach. Standard situation: the design of the walls selected eco-friendly material, that is, ceramic tile, but it is packed using chemical mixtures, acrylic bathtub is installed, used in aggressive detergent compositions as ...

Neither the PVC panels or lamination layer of MDF products are not toxic materials (release harmful substances).

Interiors with MDF and PVC panels in the bathroom, which is a photo posted on Internet sites, demonstrate so interesting design ideas that thinking about an alternative - ceramic tiles - absolutely no grounds.

Plastic panels for the bathroom: photo products and designs

With photo panels greatly simplifies the choice of material. Products classified according to certain criteria, using a filter, you can view interesting options, or to meet the full range and look more closely at the characteristics favorite species.

Having a definite desire to pick up a large panel work will not make: the choice is wide and varied. In any selling company can be found from simple rack product with a diffuse pattern restrained hues and bright variants large decorative patterns, contrasting types with the same external structure, from which you can create expressive composition.

If, however, an accurate picture of the interior is not worth to view complete bathroom design options PVC panels. Photo design ideas on the Internet page contains enough - surely will find a suitable project. Select material for a final song for the layman is much easier than coming up with the design of the existing one. You only need to visualize correctly (move to specific conditions) proposed for the interior photos. Color, proportional, compositional changes may significantly affect the final result.

Wall panels for the bathroom: how to choose

Can I choose the catalog PVC wall panels for the bathroom? It is this version of familiarization with the products offered in almost any store. Despite the fact that pre-favorite on the stand to see the material is not always possible (just not enough space to accommodate the entire range), blind should not buy.

To purchase a quality product, it is worth considering the following characteristics:

• the thickness of the front portion. The index is higher, the stronger the panel. It is better if it is not less than 2.5 mm;
• the number of ribs. Usually the same: more than them, the more resistant to deformation and mechanical stress product;

• lack of chips, dents and other defects on the entire surface of the panels, including elements for the connection (if any);
• goods belonging to the same party. Even with an identical article, the product may be different tint, which significantly manifest itself after installation.

Useful advice!If the choice is made only on the basis of photo, panel bath should not buy, do not get a response management consultant on matters relating to the above characteristics.

Waterproof panel for the bathroom: manufacturers and prices

When any thing I want to get the answer to the question of who is the manufacturer. Name a famous brand usually dispels doubt and cost issues go by the wayside. Wall panels produce hundreds of companies. Among them, both domestic and foreign manufacturers.

Most recognized to date are as follows:

1. The Belgian company Venta. Photo catalog of PVC wall panels for the bathroom of the manufacturer is constantly updated with new species. The latest development - the panel with digital printing.
2. Italy's Forte. Constantly studying the consumer demand in response to trends. Releases including exclusive wall panels.
3. Domestic company "Green Line." Manufacture is located in the Vladimir region. Raw materials are purchased abroad, the products are characterized by a high level of environmental friendliness and variety of assortment.
4. LLC "Planeta Plastic", near Moscow company. Wall panels - the main type of production. It produces about 150 kinds of high quality fabric. The method of decoration - iron-on transfers, and offset printing.

Production of all these companies is presented on the Internet. Photos of plastic panels for the bathroom complemented by a name reflecting a design feature of the design, information on the size and price.

The cost of domestic production of the panels:

• . 1035h500h4 mm - from 120 to 158 rubles / sheet;
• . 2700h500h8 mm - from 121 to 350 rubles / sheet;
• 3000h500h8 mm - from 135 to 440 rubles / sheet..

Wall panels foreign production packages are sold more often. The price of imported goods at 15-25% higher than that of domestic counterparts.

Advantages and disadvantages of wall panels in the bathroom

Summarizing the technical and aesthetic characteristics shown above this fabric, its methods installation and the selection rules, it is useful to highlight and summarize the main strengths and weaknesses of the wall panels made of PVC and MDF. Among the advantages it is worth noting the following:

• low price. Repair using wall panels will cost twice cheaper than using ceramic tiles;
• possibility to hide even considerable drawbacks wall surfaces;
• ease of installation and affordability, which can perform their own hands. The material is easily cut;
• Resistance to moisture and ultraviolet radiation;

• strength (more relates to panels made of MDF);
• providing additional sound and heat insulation;
• a variety of shapes, colors and textures. Photo panels in the bathroom, placed on the Internet, show a lot of original design ideas;
• ease of maintenance.

The weak point of a low level of environmental, exposure to mechanical stress (as applied to panels PVC), reduction of area at room wireframe assembly process.

The use of wall panels of plastic allows you to quickly make the bathroom aesthetics and makes use of the room comfortable. The variety of choice makes it possible to implement interesting design ideas. And fans periodically change the interior of the material allows to do it is simple and inexpensive.