The paint for the bathroom: how to choose the best option for finishing

can be found in this article, what features have paint for the bathroom: classification and review main types of formulations designed for rooms with high humidity levels, their advantages and limitations. The text contains guidelines to help determine the choice of finishing material with the optimum characteristics.

How to paint the walls in the bathroom: choose finishing materials

Repair of the bathroom - a costly and complex process that requires careful selection of materials. The room should be clean and resistant to moisture. The presence of mold is unacceptable, so to finish the walls of special requirements. The most budget is coated dye. This material is not only cost effective and easy to apply. Coloring compositions allow to achieve unique interior solutions from saturated and rich colors that can be obtained by adding pigments to the mixture.

Note!The dye does not apply to those parts that come into contact with water, for example, the area around the sink and bathtub. These places desirable to decorate ceramic tiles or glass panels to close.

To decide what to paint the walls in the bathroom, it is desirable to get acquainted with the existing range of compositions weigh advantages and disadvantages of each type, as well as to determine which option is suitable for creating the desired feature effect.

As the finishing materials, the following types of wall paints:

• water-based;
• latex;
• acrylic;
• silicone;
• chlorinated rubber;
• alkyd;
• oil.

The most important properties of the dyes that are used for the walls in bathrooms are water resistance and protection from microorganisms, such as fungi and mold.

Are water-based paints are suitable for the walls in the bathroom

Water-based compositions are widely used for walls. These dyes have a number of advantages:

• relatively low cost;
• no unpleasant odor;
• simple application process;
• environmental and safety;
• coating dries quickly;
• under the influence of sunlight the surface good color.

In the photo wall painting decorative water-based formulations is very attractive. Thanks to optimum viscosity is a beautiful effect, so the designers appear ample opportunity in the selection of wall coverings. Using various tools can be applied to the surface of the original drawings. Water-based paints have extensive color palette. Adding of the special pigments, it is possible to get any shade that fits perfectly conceived interior design in the bathroom.

Water-based dyes are used to create the matte and glossy surfaces. In choosing the material it is important to consider the type of foundation, structure, and use a suitable primer composition. The advantage of these dyes is that any contaminants can be easily removed from the surface by wiping wall damp cloth or sponge soaked with soapy water. Thereafter, this portion is colored again.

Important!It is not recommended to use water-based dyes in the areas in contact with water. If you avoid this does not work, should be selected coatings with a glossy surface. They are more resistant to mechanical damage.

The paint for the bathroom on the latex-based: advantages and disadvantages

As part of the latex dyes no antifungal additives, so before you paint the walls in the bathroom they should be treated with a special composition of the soil with antiseptic properties.

Advantages of latex-based inks:

• elastic surface which masks the small wall defects: cracks, chips;
• durable coating;
• resistance to mechanical stress;
• excellent decorative properties;

• no unpleasant odors;
• a dye on the surface creates a thin film that protects the wall from contamination;
• versatility;
• maximum drying time is 2 hours.

Latex surface sufficient not tolerate exposure to low temperatures. As a result of their effect coating crack. Negative latex dyes react on exposure to sunlight, due to which the surface coating is burned and loses its brightness. The price of these formulations is significantly higher than the water-based, so the finishing work in the bathroom are more expensive.

Favorable characteristics of acrylic paint for the bathroom

Experts believe the acrylic compositions the best option for painting the walls in the bathroom. This type of dyes relates to finishing materials dispersed in water-based.

Why buy acrylic paint for the bathroom:

• large palette of colors and shades;
• resistance to soiling;
• simple application process;
• the presence of light but not sharp odor, which does not cause discomfort during painting of walls;
• contamination is easily removed from the surface;
• wiping with a damp cloth and the walls of soap does not damage the coating;
• of the dye included antifungal additives which prevent mold growth;
• formulations are positioned as a water-resistant paint for the bathroom, so they can be used for finishing areas that are constantly in contact with moisture;
• prior to the application does not require the preparation of walls;
• thanks to optimum viscosity dye hides small errors on the surface.

Useful advice!By selecting the dye, it is desirable to focus on the products of leading manufacturers. They are expensive, but are able to create on the walls of a high-quality and durable finish.

Pros and cons of using silicone paint for the walls in the bathroom

Pondering over what paint to paint the walls in the bathroom, you should pay attention to the compositions having silicone and silicate basis. This category of finishing materials is very popular in the market due to its unique physical properties.

The advantages of silicone dyes:

• covering completely watertight;
• high resistance to soiling;

• composition forms a coating on the surface of the walls with a vapor barrier properties;
• a dye capable of significant error block walls, e.g., potholes and deep cracks.

Silicone compounds are classified as water-resistant paint for the bathroom. Water-based options are better than others, suitable for areas with high humidity, but their cost is very high, which is a major disadvantage.

Not recommended for the walls in the bathroom with water-based dye Silicone based on PVA. This formulation is designed for areas with dry climate. It can be used only as a cover for the ceiling in the bathroom.

Characteristics of chlorinated rubber waterproof paint for bathroom

The most reliable and practical option cover - chlorinated rubber paint. This composition may be a perfect replacement or mosaic tiles. This type of coating does not need to be updated frequently and over a long period retains an attractive appearance.

Related article:

Repair of bathroom and toilet, a photo interesting solutions

Various methods of finishing. The materials most suitable for the finishing of a bathroom and a toilet.

Advantages of painting the walls in the bathroom chlorinated rubber paint:

• moisture resistance;
• coating is capable of withstanding continuous contact with water;
• not afraid of direct sunlight;
• It does not fade under the influence of ultraviolet light;
• with proper choice of the composition of the dye can be used for the walls in the bathroom;
• as a part of no harmful or toxic substances.

It requires careful preparation of the walls in the bathroom by painting the composition of chlorinated rubbers. This type of coating is applied on concrete and metal surfaces. And it does not require prior application of primer and filler, but will have to get rid of old coatings.

Decorating the walls of chlorinated rubber paint can result in a substantial amount. To obtain high-quality coating must be applied to the surface of at least 3 layers. It does not get to use conventional solvents. In this case, special formulations are used. However, the obtained result and advantageous characteristics fully justify the cost of buying material.

Note!Despite the absence of toxic and harmful substances in the composition, it is forbidden to use a chlorinated rubber paint as a coating for containers, which is filled with drinking water.

Features painting the bathroom of the alkyd enamel

All alkyd enamel suitable for the walls in the bathroom. Due to the tension of the film - it is perfectly coating repels water, so there is no fear of making wet cleaning walls.

Why buy enamel bathtub:

• under the influence of sunlight the color of the coating does not burn;
• Excellent anti-rust metal;
• coating durability;
• fast drying;
• transparent layer good at hiding the error on the walls.

In alkyd enamels, there are drawbacks. Firstly, these compounds are characterized by an unpleasant and pungent odor. Secondly, before the application of the dye wall surface requires careful preparation. In order to prevent sloughing, the base should be coated with a primer. Qualitative coating can be obtained only if multiple coats of alkyd enamel.

Features of the application of oil paints for walls

Oil-based paint on are considered the most accessible and Budget one finishes. However, this category of materials has more disadvantages than advantages.

Cons oily dyes:

• pungent odor during application;
• coating dries very long time;
• hard to remove paint from the wall, if you want to update the repair room.

oil-based paint creates a vapor-proof film on the surface, which is a significant drawback, especially when it comes to the bathroom. In environments with high humidity levels of walls should "breathe." Otherwise, on the surface thereof will collect perspiration, which is a breeding ground for bacteria.

The tightness of the oil film is useful for finishing floors in the bathroom. For walls, this type of dye is not suitable, because the coating cracks and flaking with time.

How to choose paint for the walls to create an interesting interior in the bathroom

Decide what paint is best for the bathroom wall, you should think about the colors of the future interior. The choice of color depends not only on personal preference, but also on other factors:

• style of the room;
• size of the room;
• the amount of light;
• Structural characteristics of the premises, such as flaws or virtues that you want to hide or emphasize.

Useful advice!In order to achieve a harmonious combination of the staining of the walls it is desirable to consider coloring plumbing.

Decoration of the walls with paint: a photo finish in the interior of the bathroom

If the bathroom has a compact size, in this case, it is desirable to use a light-colored coating. This design is visually expand the space, and the use of pearlescent paint for walls enhance this effect. Pastel colors perfectly accentuate furniture and fixtures in the bathroom, because these pieces of furniture often have a white hue. Focusing on light colors is important to remember that such a finish is applied to perfectly smooth wall. Otherwise, all the defects on the surface to be viewed.

If your bathroom walls have small flaws, it is better to use textured paint bright colors. To pastel design does not look monotonous, you can add a contrasting color to the interior.

large room gives a wider scope with regard to painting the walls, the design in this case can be quite varied:

• combination of different types of finishes;
• Game of contrasts;
• the use of patterns and designs.

It is interesting to look at the interior wall paint embodiments using geometric patterns, e.g., triangles, rhombuses, zigzags. For bathroom design can be applied to dark colors. However, it should be remembered that similar surface visible traces left drops of water and soap. For this reason, it is desirable to cut off those areas where moisture gets mosaic, glass panels or tiles.

How best to paint the walls in the bathrooms decorated in different styles

The dye as a finishing material for walls used in many styles. This material is suitable for the design of bathrooms in classical style. Such a design is not limited to certain textures and colors. Besides the classical direction it never loses its relevance.

Modern high-tech style is based on the use of strict glossy shades of cold colors. In this case, the wall design is desirable to use different shades of blue and gray. The perfect complement will be transparent, almost weightless shelves made of glass.

The basis of such styles as Art Deco and pop art make unusual saturated colors. Bright green bathroom perfectly complement the cheerful pictures or drawings from the comics.

Original look bathrooms are decorated in the style of Provence. The color scheme of this trend includes pastel shades:

• beige;
• pink;
• lilac, etc.

Useful advice!For bathroom design in the style of Provence is best to use a matte coating, decorated with floral ornaments.

Can I use decorative plaster for the bathroom

Decorative plaster can be used for decoration of the walls in the bathroom along with the dye composition. These materials are perfectly combined with each other, creating spectacular combinations.

Most often used as a finishing plaster for water resistant silicate bath. This type of material forms a durable coating on the wall. Its service life is over 50 years old. silicate-based plaster did not pass moisture. The coating does not interfere with the natural ventilation of the room. Silicate antiseptichna and refractory stucco, so it can be used in environments with high humidity level.

For the decoration of bathrooms and mineral plasters are applied. The coating has a steam permeability, whereby a comfortable indoor climate is preserved. The service life of the material is about 30 years.

Waterproof properties inherent in the acrylic plaster. It is plastic and is simple enough to use. This type of coverage will serve at least 50 years.

The paint bath with defects? Which compounds are suitable for this purpose is better

Unlike plastic and steel products, cast iron tub, is able to serve at least 50 years, while maintaining its characteristics. It is durable and retains heat very well. But even with careful care enamel coating is not able to maintain its originality throughout this period.

As a result of intensive use of the tub cover, there are various defects:

• yellowness caused by settling of iron contained in water;
• chips, which appear due to the use of aggressive detergents and temperature effects;
• cracks that appear as a result of shock and drop heavy objects.

To restore the whiteness and coating integrity using dyes cast iron tub. Of course, such compositions are put forward strict requirements:

• water resistance and ability to maintain continuous contact with the liquid;
• resistance to the influence of low and high temperatures;
• resistance to aggressive detergents.

These requirements correspond to the two types of paints: epoxy and acrylic enamel.

Useful advice!To update the coverage, experts advise to buy acrylic bath, the price of such a restoration is 5 times less than the cost of a new bowl. Such savings could be achieved if the product is applied by hand.

Recovery coating with epoxy paint for cast-iron baths

Epoxy Enamel widely used for baths restoration. This tool has already been tested and is suitable for staining the bowl at home. Nevertheless, the preparation of the composition of the work requires a complex manipulation. Therefore, not every consumer will risk for iron bath buy paint epoxy.

The fact is that in addition to the basics as part of the curing agent is a dye and a plasticizer. As component, providing plasticity, dibutyl phthalate used. Thanks to him the dye turns thick and viscous. Not having related expertise and special tools difficult to apply such a coating the bath surface and thus obtain a uniform layer. Therefore, this kind of work is done only by professionals.

Average prices for enamelling baths dye BASF:

Package of services	The number of layers	price, rub.
Social	2	2450
Standard	2	2700
Reliable	3	3500

Features of the use of acrylic paints for the bath, for the restoration of the price

The liquid acrylic used for bathtubs restoration recently. Professionals say that this dye has virtually the same performance as that of epoxy enamel.

Acrylic suitable for the coating of cast iron paint at home without the help of experts. While cooking quality mixture requires some effort. Due to the high viscosity of the dye before applying it must be very long and carefully stir. The mixture consisting of hardener and substrate. When preparing its plasticizer does not apply. This differs from the dye acrylic epoxy enamel.

Hardener has a liquid consistency, that while the acrylic base - thick. On the surface of the bath is applied to homogeneous substance, so the mixture is stirred until, until it becomes fluid. In this case, he staining process is greatly simplified. Although in comparison with epoxy enamel, restoration using acrylic paint is more expensive.

Average prices for the restoration of the bath liquid acrylic Stacril Ecolor:

Package of services	Drying time, h	price, rub.
Stacril ecolor	36	2500
Stacril Ecolor 2012	36	2750
Stacril Ecolor 2015 profi	16	3250
Filling with liquid acrylic Finnacryl
Finnacryl	24	2850
Finnacryl 2010	24	3400
Finnacryl 2015	16	3900
Finnacryl 2015	8	4550

Note!These tables prices include departure of the master house, bath treatment, the cost of consumables materials and the work on drawing masters acrylic or epoxy enamel to the surface of the bowl in one layer.

How to paint the bathroom: technology and application recommendations

When the design laid out and picked up materials for painting of walls, you can start working. At the initial stage should prepare wall surface prior to application of the dye.

To do this, you need to remove the old cover:

• remove the tiles;
• remove pieces of flaking plaster;
• wash away the traces of outdated alkyd or oil paint.

Then carefully leveled surface of the walls and the finishing layer is applied putty. It is desirable to have a cement foundation.

How to remove the paint from the walls in the bathroom: how to remove trim

dye from the walls can be removed in two ways in the home: mechanical and chemical. The latter method involves the use of specialized washes. With their help, traces of the old coating can be successfully removed from metal and wood surfaces.

Efficiency washes on the wall material is not so high, so often resorted to master machining. But they are indispensable in areas where tool access is limited. In such cases, the necessary area is processed by a stripper which is applied to the surface with a brush. After a few minutes the old paint becomes jelly-like, so it can be easily removed spatula. If the wall is painted in several layers, washing procedure is performed repeatedly.

Mechanical removal method involves the use of manual or electric tool. If the old coating is severely damaged, it is possible to restrict the use of cyclic, ax, scraper intended for decorative coatings planer and other devices having a sharp edge.

If the wall before painting was applied primer coating not be able to remove using hand tools. In this case, you need to use the tool, such as a drill, angle grinder, rotary hammer or construction hairdryer.

Note!To remove the old coating using a drill in combination with a nozzle having a plurality of metal chains. In operation, the units are ground and can fly away. To avoid injury, be sure to check the status of circuits and perform their replacement in a timely manner.

How to paint the walls in the bathroom

On the prepared surface of the walls with a layer of primer. This formulation should possess antibacterial and waterproofing properties. To enhance priming antiseptic characteristics, it is possible to add liquid chlorine bleach, or copper sulfate. For drying it requires at least 12 hours. After that, the walls can be painted in any desired color.

Depending on the manufacturer's recommendations dye applied to the surface in 2-3 layers. First of all it is necessary to handle the corners and hard to reach places. The wall is painted in full, only then you can move on to the next. For the application, you can use a brush, paint roller, spray gun.

How to paint the tiles in the bathroom: the restoration of the old tiles

Upgrade finishes on the walls in the bathroom requires a significant investment. If a full repair is not enough money, we can restrict cosmetic goals.

the following colors for the tiles in the bathroom are used to change colors:

• alkyd;
• acrylic;
• oil;
• latex.

These compounds are well fall on the surface of the tile, completely blocking it. To provide the desired level of adhesion must be sanded smooth and shiny surface of the tiles. It is not recommended to dilute the dye in order to save. The qualitative result is possible only if the consistency of the composition will be tight. On sale you can also find special dyes for ceramic and glass surfaces.

On staining of the walls in the bathroom can handle any. The main requirement is to use high-quality dye that meets the requirements of the premises with high humidity levels and strictly follow technology. During operation, be sure to consider the recommendations of the manufacturer. Only in this case the coating obtained strong and durable.