Box locks on the metal door: the choice of a reliable mechanism

Today, metal doors installed much more wood. This is easily explained, since they provide high security of the home. The only weak point of these doors can be called native locks that come with them included. They often change after installation design. You can perform this operation on their own. Box locks on the metal door lock mechanisms requires understanding the device, as well as knowledge of their types.

What put the lock on the metal door?

The modern market offers a variety of options for locking devices of different manufacturers. The range of these mechanisms is incredibly broad. All modern devices used for the protection of housing can be divided into three groups, depending on the design features:

• cylinder;
• lever;
• electric.

In order to answer the question about how to set the lock on the door, you must learn the basic parameters by which selection is made of these devices. The first thing to pay attention to the material from which made the lock mechanism.

Note!The lock should be of high quality and strong enough.

Another important parameter - class resistance to burglary. Products which belong to different classes, different from each other in their protective characteristics. Not all of them are suitable for installation on metal front sheet. To protect an apartment or private house it is recommended to purchase the model related to the 3rd and 4th class.

The most popular option is a cylinder lock. Set in a metal door, such a device is not difficult. In addition, the cylinder models are very easy to operate. Quality products of this type can last for a long time without a break.

Installation of the lock on the front door: the variety of locking devices

Cylinder locks are opened by means of convenient keys that have wells response to the pins, located inside the mechanism. Hack such a device is difficult, using a set of master keys. However, the cylinder shut-off devices have one weak spot: they are unstable to strong impact. Thus, sekretki this castle you can just knock. In order to protect your home against intrusion by unauthorized persons, you must close the lock special bronenakladkami.

can be set to lock the door if desired, has other characteristics which under the lever type. The design of these devices implies steel plates. When you open the lock, these elements are arranged in a certain order, specified by the manufacturer. When selecting lever mechanism is necessary to pay attention to the quality of the material from which the plate and in such quantity.

Devices that operate with electricity, are the most technologically advanced. Of course, this is reflected in their price. The price of these devices is the highest. The construction of such locking mechanisms defines embodiment of unlocking. Such devices are much more difficult to put on the door yourself. Locks for the installation requires a professional approach.

In order to open the electronic lock can be used a special panel with numbers, which involves entering code. Sometimes such locking mechanisms are unlocked by a key fob or card. Installing the magnetic lock on the door with his hands is a complex undertaking. A man with no experience quite difficult to cope with such work. The most expensive of this group are able to recognize biometric data owner.

Note!For maximum protection, home, experts advise to install on the web 2 inlet lock. The use of cylinder and lever mechanism makes it possible to protect the door from breaking.

Replacement lock in a metal door: types of products depending on the installation method

building materials market is replete with a variety of locking mechanisms. Another parameter on which differentiates these devices is the method of installation. Depending on the method of installation of the following types of locking devices:

• overhead;
• Mortice;
• built.

False. Quite common method of installation of locks in the iron doors. In this case, the mechanism is not integrated into the door leaf, and hung over it. Such a mounting method is simple because it does not require the organization of a niche in the door.

Mortise. The most popular variant of the locking mechanisms. This method allows to preserve the appearance of the door, but it has some drawbacks. The main disadvantage of the integration of the lock in the door leaf can be called the complexity of the process. Install mortise lock with your own hands requires a certain amount of experience and training.

Independently perform such work is difficult. Mortise locks would be best to use metal canvases. Such a device requires the installation bronenakladki. On the door lock, this plate is mounted to protect the structure against drilling.

Built. Such mechanisms are integrated into the body of the door leaf directly with the design stage assembly. As a rule, manufacturers of doors using relatively cheap devices, the degree of protection that raises questions. When buying a door with an integrated locking device is recommended to think about replacing it.

In some cases, made tie-lock on the metal door?

Replacing the locking mechanism is most often performed in the event of failure of the old device. However, there are other causes that may lead to the installation of the lock. Some situations can happen suddenly, so it is recommended to get acquainted with their list. So, when are you may need to replace the shut-off device?

The acquisition of the new door. Most often, new paintings realized without locking mechanisms. However, you can find and design, complete with whom go door locks. Installation of metal doors with his hands is a fairly complicated process. should examine the installation instructions for the implementation of this action.

Helpful information!Experts recommend purchase paintings without door locks. In this case, it is possible to install a mechanism to choose an individual for a specific situation.

Loss of keys. Another common problem that often causes the replacement of the locking mechanism. Of course, in this situation, you can order a duplicate, but as a precaution it is recommended to perform replacement. Install the door lock on the entrance door of iron in this case is desired.

Replacing a broken product. More often than not out of order cheap low-quality models are produced in China. But expensive device may wear out over time. The most common problems of the closing devices, which lead to their replacement - Faulty sekretki and crossbars deformation.

Substitution unreliable device. A man who does not understand in the locking mechanism can purchase a model that has little protection against unauthorized entry. This often causes a replacement lock. It should also be noted that every year new models are available, the quality and reliability is getting better.

Breaking. This situation is very unpleasant. In the event of intrusion into the apartment you need to change the lock immediately. You can also replace the core. Install the lock cylinder door is much easier than to change the mechanism completely. In some situations, the best solution will be the dismantling of the old door leaf with the lock installed therein.

The transfer of the apartment to new owners. Replacing the device in this case is considered to be a simple precaution. It is not necessary to be confident in the integrity of the old owners, as they can if you wish to enter the apartment.

Self lock replacement is a fairly complex undertaking that requires accuracy and certain knowledge. If necessary, you can contact the person who will conduct fast and quality sidebar locking device in the door leaf.

Installation of the lock on the front metal door: preparing tools

Prior to installation, the locking mechanism in the door leaf must perform some training. It is very important to choose the right tools with which inset lock on the door to be produced.

The most important instrument is the angle grinder (LBM), which is popularly known as Bulgarian. Competent selection of the nozzle allows you to simplify this process. To work with a metal blade used for cutting circles, adapted for this material.

During the cutting iron is likely hitting metal chips in the eye. To avoid this, you need to wear glasses or a special plate. Safety compliance - a mandatory item of work. To install the lock on the door, also need to prepare an electronic drill and a set of tips for her. Fixation device manufactured using self-tapping screws.

Note!Tighten the screws can be both manually and using a power screwdriver.

In addition to these tools are used and other devices. Used for marking the marker, and to measure - construction ruler or measuring tape, as well as the costs to prepare the file. Before installation is necessary to measure the thickness of the metal sheet of the door leaf. This parameter will determine the desirability of a particular installation of the locking device. For example, if the sheet has a thickness less than 4 mm, too marker device may deform it.

Box lock of the front metal door requires care. Before you begin, you must make a preliminary drawing. Also worth exploring basic instructions on how to install and follow it.

Installation of the lock on the metal door: Preparing for the installation

Before you begin the installation of the lock, it is necessary to conduct training, which includes several successive stages. The first thing to determine the optimal location of the locking device. The recommended distance from the floor to lock is 100 cm.

Next, you will need to perform marking on the canvas. To do this, you must lean against the body of the locking mechanism to the proposed site of the castle setting. On the iron door, you can perform a mark by a marker, or any cutting tool.

At the next step is to designate two cutout border - bottom and top. This will require to perform drill two holes. It is important to remember that the section indicator bit in this case must be equal to the thickness of the housing of the locking mechanism. Before you begin, it is recommended to mark the zones in which will be drilled.

Related article:

Lock for metal doors: the choice of a reliable device to protect homes

Features of the device. Class resistance to burglary. Characteristics of the cylinder, for lever, transom and combined locks. Recommendations for the choice.

Then you need to perform with the help of two grinders cut. They must pass clearly along the lines marked out earlier. The opening of the locking mechanism is to match its size. This work is very important. After opening the organization can begin the installation of the device. To answer the question of how to embed the lock on the door, it is recommended to study the step by step instructions and advice from professionals.

In some cases, you may need to expand the opening. This happens because of errors in the cut using a grinder. For this to work, you can use a file.

Helpful information!Simplify the process of expanding the opening, you can use e-polishers.

Installation of the lock on a metal door: the main stage

Mounting starts from the lock box device prearranged location in the recess. Next, mark the point at which the screws are screwed. After marking the beginning to the preparation of the holes.

In the next step in tapping the iron door of the castle is performed keyhole. In order to cut it, you first need to generate markup. For the organization of wells used Bulgarian.

Then the locking mechanism is inserted into the groove, it is fixed by means of screws. By the end of the installation, make sure that, as well castle works. It is recommended to check each key in the set. The mounting procedure of the locking device does not end its fixation screws.

After checking the lock securing the functionality necessary to organize special linings. This operation requires precision. Incorrectly fixed laths can prevent occurrence of a key in the keyhole. In order to accurately fix the lining, it is necessary first to determine the center of the hole.

The final stage of installation of the lock on the entrance door is iron mounting plate spacing. This element is fixed to the door frame. Its function is to hold the crossbars. Before starting the mounting plate spacing is necessary to execute holes for the locking elements.

Replacing the lock on the metal door of the apartment: final stage

The final stage of the installation is to install the locking mechanism of fitting. These include pens and pads (for wells and transom holes). In order to carry out the installation of the handles, you will need to attach pads to the site and perform the fixation marking points where fasteners will be organized.

Next, drill holes in the metal web. In this case, the drill diameter should be slightly more than the same screws. The next step is required to mount the handle and pull them by means of screws. This will ensure the necessary reliability.

After this mandatory checks of work accessories. The handle must not jam, and her movements should be smooth. Install the door lock on the front door also requires the installation of overhead items.

Overhead details have not only a decorative function, but also to regulate the location of the locking elements and keys. Before starting the fixing pads on the door frame needs to be done in ludke grooves dead bolt mechanism. To do this, you need to partition. During the marking holes in the door frame is quite simple to make a mistake, so you should be careful.

First, you need to mark two points of the slots (top and bottom). Then run cuts. For this purpose the angle grinder. Cuts are arranged in parallel. The gap between them must be removed using a drill. It is important to remember that the depth of the groove should be 2 mm larger than the size of the crossbars. After mounting the plate spacing should be checked locking mechanism. This completes the installation of the lock.

Compliance with safety regulations during the installation of the locking device

Before you start tapping the locking mechanism in the door leaf is necessary to study the safety instructions. This is an important point to which you should pay attention, especially if the work is done by a person who does not have the appropriate qualifications. Working with tools that operate on electricity, itself requires compliance with certain safety precautions. For example, it is recommended to perform the work in special protective gloves. This will avoid the possibility of electric shock.

Note!In order to simplify the installation of the locking mechanism, you can buy a special set of locks for the tie. Such kits include milling and hexagons.

Do not touch the drill and angle grinder with wet hands. Strongly recommended the installation of a locking device with faulty instruments. All electronic devices must be checked before use - and only then you can start to sidebar.

In addition to gloves, is required to wear safety glasses. While cutting metal grinder in the eyes may get a spark. If necessary, you can close the person special mask. These remedies can be purchased at any hardware store a profile or to issue their orders via the Internet.

How to insert the lock into the iron door mortise device

For the installation of a mechanism that belongs to the group of mortise need to perform drill a few holes in the door leaf. They are necessary for mounting the handle, keyhole organization and installation of the device itself. Such work has a particular sequence from which it is not recommended to deviate.

How to insert a lock on the door? First, as in any other case, installation of the locking device, perform counting on a metal web. When you select the distance from the earth to the mechanism recommended to pay attention to individual preferences. Standard distance is 1 m.

Process assembly mortise mechanism more complicated than the installation of the overhead of locks. In order to carry out this work yourself, you need to read the instructions and follow them precisely. And also it is recommended to see video on this topic. An illustrative example will allow to answer the question of how to embed the lock on the metal door without making mistakes.

After performing the required markings indicate boundaries recess at the end face of the iron sheet. It should focus on the dimensions of the locking mechanism. Next, drill marking edge and cut through the notch angle grinders. Edges obtained after the organization of the niche, it is recommended to process a file. This will allow to level and smooth them out.

In the next stage, the immediate installation of the lock in the recess. Further marked points corresponding to the arrangement of latching elements. After that, they need to be drilled.

Note!The edges of the holes into which the screws will be installed, can be treated with the help of the tap. This tool is used for drawing the threads and allows to embed lock the door properly.

On the inner side of the metal blade is required to perform an opening which is used for mounting the handle. In turn, the outer side of the door should be cut for the key (keyhole).

After the device is very important to fix at once to see how it works. In the event of any faults made adjustment mechanism in the door leaf. The final stage involves the installation of mating strips on the door frame.

How to insert a lock on the door, overhead mechanisms and features of their installation

Installation of overhead model has some special features. The main difference of such devices is mounted option, which is determined by the design. Locks of this type are not integrated into the body of the door and fixed to the surface. Consider the sequence of actions when installing the applicator mechanism.

Initially marked points in which are arranged latching elements, pins, and the well. It should be noted that the overhead mounted device made higher than the mortise. The need for this is caused by the presence of a latch. Installing Locks - a simple process that will not be difficult to perform with his own hands.

Next, you need to install an iron door pins, which are used for fastening. Then you need to perform a hole for the door lock hole. She needs to go to the outer surface. On the opposite side of the door leaf will need to hold fasteners lock via pins.

In the next stage, testing of the locking device. If it works properly, then it is done screwing fasteners. At the final stage is established and organized pad openings on ludke (a mounting plate). Among other things, it encouraged to review video data which demonstrate the lock setting on the iron door from beginning to end.

The process of mounting the applicator device is most preferred if the work is performed by hand. Do not forget that even in this case, there are many nuances that can not be ignored.

How to replace the door lock on the metal door: a cylindrical type

Cylinder models are the most common. In today's market you can find many versions of these devices. The advantage of the mechanisms related to this group lies in the fact that they are equipped with a core which has a cylindrical shape.

Note!When loss of optionally installing the new key locking mechanism. In this case it is sufficient to change the lock cylinder in a metal door.

Replacing the core is no different complexity. Let's see how this process is carried out in stages. The first step is to dismantle the old larva. After removing sekretki need to open the locking mechanism. To do this, use special keys.

Extracting the remaining elements of the device is not necessary. Screws, which fix the door lock plate at the end face of the metal blade is required to unscrew.

Then, using the key, you need to close the lock. Further, in the central part of the tongue is made twisting the screw. The next step is to pull up the larva. This operation is performed using a key, which typically must be deployed on 40 °. The installation is the front door lock cylinder is completed.

It is worth noting that in some cases, the dismantling of the old core is difficult because of the presence of various kinds of damages. In this situation sekretki extraction is performed in two stages. In the first stage it is drilled. The second stage involves knocking out the old damaged larvae from the castle.

How to replace the lock on the metal door: lever mechanism

Devices of this type are manufactured by different companies. Experts recommend buying a model that relate to the European type locks. This can be explained quite simply: these mechanisms are more amenable to repair than their domestic counterparts.

The models, which are produced by Russian companies, in case of failure often require complete replacement. In turn, the European lever locking mechanisms do not need it. In case of failure of the lock, simply replace the core.

Before you start, you want to study in detail the instructions for repairing the lock on the metal door. Installing and replacing the lever mechanism has its own characteristics that can not be ignored. The first step is to replace the device dismantling the housing. To do this, open the door, which will open the latch element.

Further, the core structure is dismantled. From it the following elements must be removed: bronenakladkami, knob, bolt and key. Decorative part of the structure in this case optionally removed.

Note!Replacing the core lever mechanism is more complex event than setting the lock insert in metallic doors.

After dismantling the core need to unscrew the screws securing the structure and remove the old part. Further, installing and securing a new core. Many European models of locking mechanisms do not require such intervention, since there is the possibility of conversion of levers.

Installation on the door electromagnetic lock

Electromagnetic devices have fundamental differences between the traditional locking mechanisms. Design features such devices determine their installation. They consist of two main elements: the main part and the response of the plates. Before starting the installation, you need to identify the area in which a magnetic lock will be located.

In order to determine the place, it is necessary to make the main part of the mechanism to the iron web. This is followed by the stencil paste on the portion corresponding to the location of the return plate. Next, the marking points, in which latching elements are mounted.

The next stage of the magnetic lock on the door involves drilling holes for the fasteners. After the organization of holes required to fasten the plate to the metal blade. For this purpose, special washers.

In order to ensure a good structural strength, need at least two washers on each screw. It is important to remember that from the first ludki screwed washer made of steel. Then on top of it overlaps rubber article. This installation of the electromagnetic lock on the door is considered to be correct and provides a high density core abutment.

At the next step is to determine the place in which will be located corner unit. To do this, you need to make the main part of the device to the anchor element. Further work is performed using the hexagon. This tool allows you to shift the plate in the correct plane.

To check how true is made installation of individual structural components, it is recommended to ease the locking bolt. With this manipulation is freed response device wafer. Install the electromagnetic lock on the door requires professional knowledge and skills. Competent to perform the installation quite difficult.

In the final phase, the power supply connection. It is important to remember that at the end of installation, you must check the operation of the magnetic lock. The product will not operate correctly if the plate is moved during installation. It should be located exactly parallel to the ground.

How to change the lock on the metal door: expert advice

Mounting of the locking mechanism on the metal web may be produced in several ways. The procedure and feature of the installation process is completely dependent on the species of the castle. There are some important nuances that will perform error-free installation of the locking device.

In order to properly insert the lock on the metal door, we should not forget the need to check his work. Moreover, it is recommended that after each assembly stage. Any inaccuracies or organization during the markup of fasteners can lead to a shift in the structure. As a result of the shut-off mechanism will not work properly.

Note! High-quality lock is a guarantee of protection of the home from intrusion. There are other, additional measures to strengthen the protection of the house. For example, if desired, can be installed extinguishing system and observation chamberI am.

To answer the question of how to embed the lock on the metal door, it is necessary to examine the photos and videos on this subject. The prevention of failures locking devices requires periodic maintenance checks. Experts recommend that from time to time to lubricate the mechanism.

Installing the locking device on the metal blade requires knowledge of many nuances. To select the installation option, you must take into account the type of the door and kind of lock. It is not necessary to purchase a cheap model of locking devices, as in this case, the probability of buying a defective product. During installation should always verify the correctness of the lock arrangement.