How to mount the shower cabin yourself

Some bathrooms are so large that it is not possible to install a full bath in them. A practical solution in such situations is the purchase of a shower complex and the installation of a shower cabin with their own hands. This is also a very economical option for the repair and arrangement of a small bathroom.

Self-assembly of the shower is a very troublesome and time-consuming process, which is complicated by work in a confined space. All actions need to be carried out in stages, performing pre-assembly and final adjustment. Ways to fix the shower.

The current construction stores provide a huge variety of shower cabins. Many of them have instructions containing several schematic drawings.

The installation methods of the shower enclosure are divided into angular and rectangular views. And also they differ from the types of construction that are:

• open, in their composition only the pallet and the front side;
• closed, they consist of a pallet, front wall, roof and rear wall.

The type of construction is selected depending on the size of the room. The main difficulty in assembling the shower is in the space constraints of the room, therefore it is necessary to take into account further maintenance during installation.

Installing the

shower siphon When installing the shower siphon, you need to determine the optimal height of the shower tray. For this, it is necessary to make preliminary measurements, to bait and try on the installation site all fasteners. In addition, you can connect the drain to the sewer.

With a low pallet, the installation of a simple siphon is an excellent option. To ensure unhindered repair and cleaning, it is necessary to install a siphon so that free access to it and pipes is ensured. Siphon should be selected in accordance with the diameter and type of tray.

Mounting the shower tray

It is recommended to separate the shower tray shower tray into two stages:

• , fixing the fasteners;
• application in the place of installation.

For the first stage, the best room is a spacious room with a flat floor. Conduct it directly in the bathroom will be inconvenient.

The water drainage system must be connected before installing the drip tray. This is done by flexible hoses. To start, the pallet should be collected. For this it is necessary: ​​

1. to put the pallet on the legs;
2. screw the long studs to the full stop;
3. tighten the central leg on the shortest support;
4. fix the pallet to the wooden blocks and tighten all the fasteners;
5. expose the remaining legs, distributing the load on the pallet under the level and secure;
6. insert the fasteners for the screen;
7. put the pallet on the floor at the shower installation site;
8. connect flexible hoses to the water supply and drain hose to the sewage system;
9. check draining and tightness.

Widget from SocialMart

To check if the water is completely drained from the drip tray, it is recommended that a drain hose be connected to the sewer pipe and filled with water. The drainage works better, the faster the water goes. Adjust it by changing the height of the pallet.

When you purchase a shower enclosure, you will find an installation manual that shows all the connections and the necessary circuit diagrams.

Fastening the walls of the shower cubicle

A very important step in the self-installation of the shower enclosure is the installation of glass fences. For this it is required:

1. to mark on the wall the fixing points of the side panel, this is done by the level;
2. make holes in the wall for the fastening elements, this is done with a drill or perforator;
3. fix the side panel of the shower to the wall;
4. attach the glass cab component to the panel and monitor for no gaps;
5. install both side panels and an adapter between them;
6. attach the panels to the upper frame.

When assembling the enclosed shower cubicle:

1. fix the panel forming the roof on the wall;
2. fit the outline of silicone onto the rear wall, and insert into the grooves of the horizontal panel;
3. fix with plastic clips;
4. attach the front panel to the side panels;
5. install side panels;
6. to install the top part;
7. mount the silicone rollers in the sliding doors;
8. install sliding doors, eliminating distortions.

With plastic walls of open type shower enclosures, sealing is necessary. Sliding elements require the installation of a sealing rubber band. Joints pass silicone sealant

Connecting the water supply of the shower yourself

When connecting the water supply to the shower enclosure, it is necessary to use special connectors and reliable pipes. In this situation, fit fasteners and practical clamps.

The connection starts with the main water supply shut off. Then, in the wall or tile, a hole is drilled with a drill, into which the anchor and screws are installed, without forgetting the silicone sealant. After that, the hoses are fixed. On the outside of the shower panel are installed water supply pipes and decorative plates. Then the installation and tightness is checked, and the handle is fixed.

Recommendations for the assembly of the shower cabin

• When buying a shower enclosure, it is recommended to specify all dimensions, taking into account the dimensions of the room. The chosen material will depend on the way of fixing and suitable elements;
• Many pallets are made of plastic, which can not withstand the volume of water and the mass of a person, so it's worth erecting a drainage podium;
• When installing glass elements, the highest precautionary requirements must be observed.
• When installing the shower enclosure, it is recommended to carefully check the possibility of leaks and tightness;
• In addition, it is recommended to take into account the preferences of all those who will use the shower cubicle. It can be located to the right or left of the entrance door.

When carrying out all the instructions and taking into account the necessary requirements, the installation of a shower cubicle with its own hands does not involve special expenses. And the knowledge gained in the process of assembly will help quickly eliminate any problem that has arisen from exploitation.