SHARE
in social networks
The bed is the main element in the bedroom. From the version of the model depends on the level of comfort, functionality bed and sleep quality. By the choice of the bed should be approached with great responsibility, especially when it comes to children's beds. High-quality, rugged, durable design with aesthetic appeal will be expensive. Baby bed with their own hands will be much cheaper, but the result will exceed all expectations.
Content
- 1 Baby bed with his hands: the basic requirements for construction
- 2 Bed handmade: dimensions, designs and diagrams, sketches and drawings
- 3 Dimensions cot depending on the type of construction
- 4 Materials for 5 years manufacturer's classic children's beds
-
5 How to make your own hands baby cot for a newborn
- 5.1 How to make a baby cot for the newborn: a sequence of actions
-
6 Making a single wooden cot from 3 years
- 6.1 Creating side elements bed for children from 3 years
-
7 Production of construction of 3 years with borders: children's loft bed
- 7.1 Organization of the lower zone of a baby cot from 3 years with boards
- 8 How to make yourself a bed-transformer: workflow
Baby bed with his hands: the basic requirements for construction
Self-made bed for children must meet the following requirements:
- This piece of furniture should be made exclusively from natural and environmentally friendly materials;
- the bed should be reliable, robust and stable construction;
- the product should not contain any sharp angles, protrusions;
- surface structure of the constituent elements must be smooth, without roughness and chipping;
- it is necessary to match the size of the bed height and body build child (with a margin of 25-30 cm in length);
- construction must contain protecting elements and other devices, excluding the probability of incidence;
- bed the child must have a high functionality, which is expressed in the presence of drawers, shelves and niches.
Made with his own hands Children's bed made of wood has several advantages:
- You can be assured as the materials used for its production, as many stores articles devoid of design information parameters;
- bed design is created on individual parameters tailored to personal requirements and desires;
- preparation of the products it is possible to verify the design for strength and stability;
- It does not require large financial costs;
- furniture, made his hands, gives incomparable pleasure and aesthetic pleasure.
first bought mattressCorresponding to the parameters of the child, this will depend on the exact size of the bed
Bed handmade: dimensions, designs and diagrams, sketches and drawings
Today, children's beds available in a wide variety of species. They differ in the type of construction, dimensions, number of components, the presence of additional devices and furniture manufacturing material. However, not any model can be done at home.
The most popular models which can be independently manufactured, are the classic bed in wood with their hands. Photos clearly show the options for products with collar and without it, loft beds and bunk design. At specialized sites on the Internet you can find a variety of drawings cots with their hands and dimensions of each structural element.
Classic Single children's bed is the most simple to manufacture. She carries a minimum functional load, as it can be equipped with only a drawer for linen. The design consists of a frame, a headboard, footboard, a base, sidewalls and legs that visually represent a baby cot drawings. The size of the carcass, which is used for making wooden beams depends on the dimensions of the bed, as determined by parameters of the mattress.
The base may be solid (sheet of chipboard) or as a grating of lamellas with vents. The second embodiment is more preferable. Footboard and headboard are usually made of solid wood, plywood or chipboard. Design can take many forms.
Important!The height of the headboard should be greater than the size of the foot.
For fencing bed used facade and the rear side frame in the form of solid or latticed walls. Bed legs run independently or purchased in the store. In the first case, they may be separately attached or are integral extension of the basic design.
More functional is considered a loft bed. The sleeping area is located upstairs. Under it is possible to organize a complete storage system, placing the chest of drawers, a cupboard or shelf. Creating such a structure requires skills in furniture manufacture. For two children can be manufactured tiered structure, the creation of which also requires a certain experience masters.
Sketch of children's bunk beds metal
Dimensions cot depending on the type of construction
For each type of baby cot provided their standard dimensions. An infant under 6 months can sleep in a compact bed-cradle, which resembles a pram. Dimensions of a berth up 80h40 cm. For different design models are provided slight deviations.
Size cots for newborn standard design of 60x120 cm. The side wall may be removable. The height of the bed relative to the floor can be changed, allowing you to adapt to the child's age. Single cot with his hands has a width of 70 cm and a length of 130 cm. The design is carried out with guards that are removable. Dimensions sliding bed, which apparatus can change their size with growth of the child, can reach a length of 160-170 cm.
Useful advice!For a child who turns in his sleep, it is advisable to choose a product with a minimum width of 80 cm.
a couchette adolescent child requirements differ significantly from the requirements of the beds for younger students. The child has changed the style and rhythm of life. Him room It becomes a place for the reception. Standard size bed teenage considered 90h180 see. However, many parents refuse such an acquisition, since the structure is small in a couple of years. The optimal size for this are 90x200 cm bed. This adult bed is not only convenient, but also durable.
For two children, the best option are bunk beds. construction height is 1.5-1.8 m, which depends on the height of the ceiling in the room. External dimensions of beds may vary. Beds which are disposed on the second tier, or 80h200 have dimensions 90x200 cm. Bedroom of the ground floor space may be shorter than 20-30 cm.
Materials for 5 years manufacturer's classic children's beds
For the manufacture of the frame should use solid wood. This made their own hands wooden bed characterized by safety, durability, reliability and environmental friendliness and durability, but high cost is different. More affordable is edging board. Well-proven furniture panels in the form of solid wood slabs created from the bars glued wood. Also suitable MDF from light wood.
Useful advice!Do not use heavy solid wood as the material to make the structure very heavy and inconvenient for a possible move.
For lamella should choose an elastic material. A good solution is plywood. DSP can be used for beds for children from 2 years. Headboard and footboard is often made of MDF or chipboard. This material can also be used for the manufacture of drawers, shelves, decorative panels. For the production of children's wooden cribs require a minimum set of tools, consisting of an electric jigsaw, drill and sander.
In addition to the base material, require additional elements:
- fasteners of different diameters;
- joinery type adhesive;
- special furniture made of metal corners;
- Drawer guide panel;
- accessories;
- sandpaper;
Related article:
Bunk bed with his hands: the stages of assembly of different design options
Variety of designs. The optimum size. Material. assembly sequence of beds of wood, chipboard and metal.
- paper tape;
- stain;
- paint;
- lacquer.
How to make your own hands baby cot for a newborn
Production of the classic crib for baby is a simple process. Dimensional drawings traditional wooden structure can be taken from the Internet. The first step is to buy a mattress, of which the size of the bed will depend on parameters.
Standard product size is 60x120 cm. The height of the skirting construction from floor to reach 90 cm. The backs will have a larger size of 110 cm. Best of all, if the bed is at a height of 30-35 cm, which will allow your child 2-3 years free to climb it. Between the vertical beams on the back and sides of the bed length should be 10-12 cm.
To produce the binding side elements and bead bed are used for the baby board section 35h70 mm. Lounger, which will be laid a mattress, made of six bars section 30x50 mm. The length of the rod openings 25 are executed mm deep frame for strapping a hollow spike. The length of the cross-members is equal to the width of the mattress minus twice the width of the bars. To this value is added the value equal to the sum of the depths of the two jacks.
Useful advice! In order to eliminate errors and speed up the process executed immediately mark all identical parts.
How to make a baby cot for the newborn: a sequence of actions
On both ends of the wooden beams are performed spikes (spike-through is used for ligaments). These holes are made with a circular saw, which is regulated by the entrance height. Spike must match the thickness to the size of the slot. This procedure is the same for all identical parts. The excess part of the timber is removed by a saw.
Next, bonding is performed parts loungers. It is important to monitor the evenness of all angles, which must have a value equal to 90 °. For the manufacture of rods used bed rail section 20x20 mm. They should be attached to crossbars backs and sides by applying a single blind stud. Once assembled back frame is calculated length of the rods, to which you want to add twice the length of the stud.
After the production of all elements of the bed surface of each part must be thoroughly sanded. With the rasp runs rounding all sharp edges and corners. The next step is bonding all the parts back to Wyman. Required to closely monitor the rectangular structure.
Made bead bed whose dimensions are different. Runs docked lower transverse girders backs with these elements. rear wall equal in length to the lounger with an allowance of 1 cm. To get the height of the rim, it is necessary to subtract 90 from the number of the height of the lower cross back straps.
To receive the bar, removes the front rim, perches its length should be shorter than 15 cm, than the length of these elements of the second rail. Spikes on them are performed using the same algorithm that is used in their manufacture on the backside.
The collar is glued to Wyman so that all of its elements are perpendicular to each other. The next step is the assembly sides and back design with the use of screws for fixation. Then installed removable stopper for a baby cot with his hands. It attaches to the external board with a rubber band. Upon completion of the assembly bed was covered with plywood thickness of 3-4 mm, which is fixed with small nails.
Making a single wooden cot from 3 years
The structure of the frame structure for a child comprises a base and backrest, which is clearly shown in figure bed. The width and length of the product is determined the dimensions of the mattress. The lower part of the bed should be located at a distance from the floor no more than 35 cm, which allows your child to effortlessly climb on it.
The frame is made of two bars, which are made of edged board size of 50x100 mm. It is measured with a tape measure the required length of the product, which is denoted with a pencil. According to the label via Jig saws off board of a predetermined size in an amount of two pieces. On each side of the crossbar is applied to the adhesive. By means of these screws in fixed locations 25x50 mm strips for fastening slats, which must be shorter than the crossbar 10 cm.
How is the training base for the mattress baby cot 2 years? For this purpose of slats (20x20 mm) are cut planks whose length corresponds to the width of the mattress. Their number is determined based on the completely filled base space. Products with focus using self-tapping screws are mounted parallel to the slats slats. Step between them should be not more than 10 cm.
Important!The screw cap has to enter fully into the wooden bar, leaving a small recess which is filled with a mixture of putty.
You then need to grind all the fixing holes. In extreme strips performed cutouts for the bed legs, which are made from timber 50x50 mm in an amount of 8 units. Four elements under the headboard should be longer than the product under sleigh. The blanks are glued together in pairs and are fixed with screws.
Creating side elements bed for children from 3 years
The next step is to perform by using an electric drill hole boring machine in the boards having a groove width of 25 mm, which are used for making the foot and the head structure. They are drilled in the ends of the strips. It should be extremely careful when the holes which must be located on the same level on all strips. You need to have the same depth, which is equal to ½ the length of the board.
Headboard and footboard can be made from a single piece of chipboard or MDF. The first element is performed longer than the second. The width of parts is determined based on the value of the parameter of the mattress, to which is added twice the wall thickness of the longitudinal frame beams of the bed. The products can have a different shape of the end part which is rounded or undulating. If the bed side parts are made with railings, then to the width of the product should be added a further 25 mm.
Useful advice!Cutting out articles from chipboard or MDF, should be their surface paste over with a paper tape that will prevent chipping.
If the manufacturing side elements bed for children from 2 years old used wooden boards, then the following sequence of actions needed. From bars size 25x50 mm cut parts of equal length. They are inserted into the slots of the vertical boards filled with glue. The legs are carried out under the dowel holes. They are placed side structural elements. It should be tightly pressed parts, eliminating distortions and cracks.
Having made the vertical supports of the side members, they should be linked to the frame around the perimeter to create a wooden roof. The last step is to mount the beam-ridge that connects the base of the bed-house with their own hands design. Once prepared all the details of the product, there comes the moment of their assembly. Pre each element is checked for chipping and recesses, which are sealed putty mixture and grind the surface to a smooth condition. Further, all details are handled primer or stain. After complete drying of the surface is covered with paint products.
Production of construction of 3 years with borders: children's loft bed
There are several types of beds such as loft. The design can be placed on four supports, attached to the wall or ceiling. The first option is the most simple to manufacture. The bed is made of solid wood. For its production need laminated board or calibrated section 40 mm, 50x50 mm lumber, sliced strips 35 mm wide and 10 mm thick.
Strays from the board frame is made with his own hands Children's loft bed is available in each direction on the large 20 cm internal dimensions than the dimensions of the mattress. Screwing is performed from the inside frame of the timber to the bottom end of the flush box. Thin strips made of slatted base. The elements must be 20 mm shorter than the internal dimensions of the box. The slats are arranged at a distance of 50-65 mm from each other and are screwed with screws to the frame.
The height of the child's bed guards from 3 years with their own hands is determined by calculating the thickness of the mattress. The collar should rise above them by 15-20 cm. In place of the ladder in the fence arrangement performed clearance width of about 80 cm. For the manufacture of the boards is desired to use a decorative panel made of MDF or particle board. You can also protect the sleeper couch framework of wooden beams cross-section 25x25 mm. His stand will rest against the timber on which the slatted base bed. They are fastened with through ties to protect them duct.
Useful advice! To the sharp edges of the bars without going into the mattress and not damaged his mattress-cover, with them it is necessary to remove the chamfer.
For the manufacture of a loft bed will need solid wood, planed boards and planks
The bed is fastened by means of screw connections or metal angles to the vertical uprights. To be safe, fixed support rails at the ends.
Organization of the lower zone of a baby cot from 3 years with boards
In the space formed by the implementation of their own hands loft bed, you can enter a spacious wardrobe. It is better to place the door on the side of the structure. The second wall in this case would be an additional support point. The save space, you can install the shelves with open shelves or desk. Are very popular children's bed with drawers that fills the lower space under the berth.
You can also place in the space longitudinal cabinet. Side support panels will experience a minimal load, and the sleeper will not interfere with the free access to the cabinet. Its walls are attached is the same for both options. One outer side sutured chipboard, which must be attached to the shelf via SCREW. Then fixed straight panel that is used for hanging doors.
The resulting rectangular podkrovatnoe space can be divided by horizontal and vertical partitions for any zone with drawers and open shelves. Here, it is desirable to establish a desk, table top is made of chipboard. This is possible only if sufficient height bed. As a point of support will serve one of the side panels of the structure. Different options are shown in the photo cots with their hands from a tree.
Useful advice! To further save space worktop of chipboard can be retractable or folding.
How to make yourself a bed-transformer: workflow
Folding bed-transformer consists of three basic elements: the bed, ducts and the lifting mechanism. bed dimensions are determined on the basis of age. However, it is necessary to provide a large margin, taking into account the child's maturity. As a material for the manufacture of cribs with their hands, you can use natural wood, MDF or chipboard. The last option is the least expensive, providing light weight construction.
The box must be durable enough to withstand the load of the moving bed and the lifting mechanism. It consists of a skirting, the rear wall and the stop rail. duct size calculation is performed based on the height of the mattress and headboards sizes. All parts are assembled on the floor and are fixed with screws. The box is mounted on the floor or the base and screwed with the metal parts to the wall.
A bed with a mattress should be easily lifted and fixed in a vertical position. The ideal embodiment as the movable part is factory orthopedic frame. It is equipped with legs, the height of which is adjusted for the required dimensions. To exclude the mattress shifts in different directions on the perimeter of the frame you want to create ledges of high quality wooden board.
Useful advice! Additionally, it is recommended to establish a system of counterweights and gas shock absorbers.
The lifting mechanism can be performed independently of the trunnion bearings or garage curtains. A more reliable option is to purchase factory set. The mechanism must be attached to the box and beds. Facade bed in the upright position, you can decorate a cabinet with imitation doors with handles or create a monolithic mirror surface.
Today on the Internet there are detailed dimensional drawings of various embodiments of structures for cots. With minimal skills and having a great desire to please your child, you can own hands to create a unique bunk bed.