Bath Bathroom: varieties, specifications and photos

In the past, the bath bathroom were chosen solely by size (for practical reasons). However, there are several criteria today, which draw attention buyers of these products. In addition to size, it is very important bath material of manufacture, as well as its shape. Many of the products are equipped with a special hydro-massage equipment, which also differ in their characteristics.

Bath varieties for bathrooms

The presence of a large bathroom greatly simplifies the selection of the bath. But in the modern world is much more common small-sized apartments with small bathrooms in standard sizes. When choosing a bath in the room with limited space it is necessary to study all the nuances and tricks that will pick up the equipment the minimum size without loss of comfort.

Before buying a bath it is necessary to pay attention to four basic parameters:

• product dimensions;
• the form;
• manufacturing material;
• the presence of hydro-massage or lack thereof.

All these factors make it possible to simplify the selection of the sanitary equipment. The last thing you need to decide on the coloring bath, as well as with auxiliary fittings. On the Internet you can see the common models of baths. There you can choose and buy certain equipment. What bathrooms are the most popular today?

Today is a big popularity among consumers enjoy acrylic model of standard sizes. This material has good performance characteristics and is relatively cheap. The material from which the bath depends on many things: time and complexity of the installation, the speed of the cooling water, as well as service life.

Note! Although cast iron products and losing popularity every year, but they have the highest shelf life. Also on these models is difficult to leave scratches or other damage.

Professionally Decorated bath is also an important selection criterion. bath design can be very different. Many companies sell products that are equipped with handles (for convenience), mirrors and other auxiliary elements. Choosing color scheme of the bowl is completely dependent on the taste preferences of the owner of the apartment and features a specific bathroom interior.

Cast-iron bath - features and tips on choosing

Model, made of cast iron, has recently lost its popularity. This is due to the development of industry and the introduction of new materials, which have a better performance at the same price. But, nevertheless, cast iron models still enjoy certain demand.
Cast iron products do not have a wide model range. In the market you can find cast-iron bath of the following form:

• rectangular;
• ovoid (oval).

Baths from cast iron have a large mass, which impedes their transport and installation. Depending on the size, mass found pattern with from 70 to 200 kg. Care for such models eliminates the use of abrasive cleaners that may damage the enamel.

The main advantage of such a bath - a low thermal conductivity. The temperature of the hot water in such a structure is reduced by about 5-10 ° C for 1 hr. And they are quite strong and have good noise insulation qualities when recruiting water. Cast iron model is one of the most accessible to date, in terms of cost.

How to choose a cast iron bath?

When choosing products made from this material, experts advise to pay attention to the quality of the enamel. Enamel coating must be intact, without any visible defects (chipping, cracking, roughness and the like. D.).

When installing such a construction is necessary to pay special attention to the material from which made the floor. Experts strongly advise not to install a cast iron model in the room, which has exposed wooden beams. This is due to the large weight of the iron structure.

Modern cast iron models can be equipped with a hydro-massage equipment, which largely affects their cost. The price of such baths can reach 150 thousand. Less technologically advanced models are available in the price range of 30 to 50 thousand rubles.

Size cast iron tubs - the main parameter that influences their choice. In accordance with the dimensions are three types of products:

• small bath (length 120 or 130 cm and width - 70 cm);
• standard (the length of 140 or 150 cm and width - 70 cm);
• large (vanny- length 170, 180 or 185 cm and width - 70, 85 cm.).

For small-sized rooms recommend to get angular cast-iron baths. This model will keep the useful area of ​​the room.

Related article:

Acrylic bathtub: size, shape, and an overview of popular products

How to choose the right size products for the bathroom. Popular manufacturers and bath model. Price policy.

Steel baths - an alternative to cast iron

If you pay attention to the performance of the steel bath, they most resemble acrylic model. However, they are positioned as an alternative to cast iron construction. Among the advantages of steel products include: light weight (30-40 kg), democratic value, but also a fairly long operational life. In normal use, the steel bath can last from 25 to 30 years.

Helpful information! In order to keep the heat in the structure of this material, it is recommended to use the principle of the closed space under the bath. It is necessary to fill the low-heat-insulating material, which will extend the cooling water. For this purpose is also suitable conventional polyurethane foam.

The main disadvantage of steel models - high thermal conductivity. Such bath very quickly loses heat. Soundproof quality steel model is also very weak.

Light weight steel structure requires the organization of a reliable fixation to bath did not move during operation.

In form are the following kinds of steel structures:

• rectangular;
• ovoid (oval);
• angle;
• round.

Steel models are often equipped with additional elements necessary to increase the comfort of use. These elements include: armrests, handrails, hydromassage equipment. Coating applied to steel, may be represented by enamel or modern polymers. The cost of such baths are generally the lowest.

Acrylic bathtub - a modern version for the bathroom

Acrylic models occupy the most extensive niche in the sanitary ware market. Their popularity is due to reasonable cost, good performance characteristics, and a variety of models. The range of acrylic baths is incredibly broad, which allows to choose the appropriate model for a specific case. They differ in size, shape, and colors.

Acrylic bathtubs are small in weight. The weight of such product ranges from 15 to 20 kg, which greatly simplifies their installation. Different manufacturers give a guarantee of 7 to 15 years for such a bath.

What is better to choose a bath? Acrylic products are manufactured in two basic technologies. The table below shows the two types of acrylic structures, depending on manufacturing technology, as well as their main features and differences.

Type Acrylic products	Characteristics
Cast Acrylic (100%)	Production of acrylic sheet is different quality and meet all published specifications advertising.
ABS / PMMA acrylic +	ABS - a polymer, which is used to reduce the cost of production. Thus, this material negative effect on the technical characteristics of the baths. The acrylic layer in this construction is only 10% of the total thickness. The main disadvantage of products from ABS / PMMA - low strength.

In form are the following varieties of acrylic designs:

• rectangular;
• ovoid (oval);
• round;
• bath droplets;
• multi-faceted options.

Particularly noteworthy compact baths in the form of drops. They are perfect for small spaces and are able to minimize the space of a small-sized flat loss. There are various sizes of small baths. Prices and photos of these products can be studied using the manufacturer's catalog.

Acrylic models have an attractive appearance, which is an important factor that contributes to their popularity. The low thermal conductivity of the acrylic material does not allow water to cool quickly. Acrylic has good sound insulation.

Where can I buy baths for bathrooms and advice on use

Bath for your bathroom can be purchased in the construction hypermarket, as well as in the profile store. And choose and buy this plumbing product can be on the market. If necessary, carry out the bath can order via the Internet using the search bar of any browser.

Using acrylic models requires compliance with certain operating procedures. Chemicals used for the care of the bathroom, require careful selection. Abrasive is not recommended to use the funds. Also, experts advise not to put a variety of containers in the bath. This applies not only metal basins, but also products made of plastic.

Important! Acrylic is very sensitive to high temperature material. It is therefore necessary to monitor the temperature of the water when the bath is filled. Acrylic surface structure may melt at a temperature of 160 ° C.

In the event of defects on the surface of the acrylic can fix them yourself. To do this, use a special polish, which can be found in any store a profile.

Quaryl baths for bathrooms

Quaryl products are made from an acrylic material with a mixture of quartz. Such baths have high performance and aesthetics. Consider the basic dignity Quaryl models:

• good resistance to mechanical stress (shock);

• quiet;
• Low thermal conductivity;
• high hygiene;
• large variety of forms.

They weigh more than acrylic counterparts. This is due to the fact that in the Quaryl added quartz sand.

Because acrylic component Quaryl bath can be deformed as a result of exposure to high temperatures. Therefore, in such models it is not recommended to gain too hot water.

For the manufacture of baths used Quaryl molding. The forms, which are used in the production process can be very different. Color gamut of such baths are usually presented pastel colors, but there are drastic color (e.g., black). The smallest bath of this type has a length of 120 cm, and the biggest - 180 cm.

The main distinguishing feature Quaryl design - its functionality. Most models such baths include hydro and aeromassazhnoe equipment, armrests and head restraints. In some designs, there are built-in radios and other high-tech options. The presence of such functionality is reflected in the cost of these products.

Ceramic bath - exclusive products

Ceramic models bathtubs are among the least common. This is due to their high cost and fragility. From a practical standpoint, these baths are not leading to the bathroom fixtures market.

Consider the main benefits of ceramics:

• Low thermal conductivity;
• quiet;
• a long service life.

Ceramic disadvantages can be mentioned:

• high price;
• a lot of weight;
• weak resistance to mechanical stress (shock).

Due to the fragility of ceramic bathroom fixtures complicated by its transportation and installation. Most often, ceramics are available on request for a specific interior.

Baths made of artificial stone

Products from a natural stone look expensive and elegant. Such a model can be a decoration for any bathroom interior. For the manufacture of artificial stone construction uses several components, among which: the soft filler, a binder (polymethyl acrylate), and crushed stone.

Plumbing equipment made of artificial stone, has high performance characteristics. Even natural stone can not compete with an artificial material.

Note!Many manufacturers refer to products made of artificial stone clean. However, this is not quite true. Acrylic resins that are part of such baths, capable of releasing chemical compound.

These products are characterized by a number of positive qualities:

• high strength characteristics, resistance to shock;
• good ductility factor;
• relatively poor thermal conductivity (less than tubs made of natural stone);
• quiet.

Consider the main disadvantages of baths made of artificial stone:

• high price;
• large mass;
• weak sustainability.

Products made of artificial stone additionally can be equipped with hydrodynamics and aeromassazhnym equipment. Today, these baths have a large range of colors, allowing them to expand the operational area.

Bath bathroom made of natural stone and exotic materials

Models made from natural stone, characterized by the largest weight and high cost. They are used very rarely, usually for exclusive bathrooms. Installation of such models is considered difficult and responsible occupation, and therefore requires professionals with high qualification. Artificial and metal constructions are superior sanitary ware made of natural stone on the technical characteristics.

Large popular baths made of marble. They have a very high cost, however, are very aesthetic and are often used as interior decoration. Due to the large weight of such products, they are inherent sound insulation qualities.

Today you can meet the sanitary equipment from a variety of materials. Various companies produce a bath of non-standard and exotic materials such as:

• wood;
• glass;
• concrete.

Wooden buildings look the most impressive and capable of becoming any decor. However, in the case of such constructions can be traced a certain pattern - for the style to be paid specifications. Often the bath of exotic materials are well combined with mirrors.

The advantages of wooden baths include:

• environmental friendliness;
• pleasant natural odor, which enhances the effect of relaxation when taking a bath.

Glass and wooden models have a variety of drawbacks. The main drawback of such designs is considered a high thermal conductivity. The water in these baths cools down very quickly. Plumbing equipment from exotic materials is large.

Dimensions bathrooms, which establish such structures, significantly higher than standard values.

Helpful information!Wood, glass and concrete models have other drawbacks. Glass is very delicate, which makes it difficult to store, transport and installation. Wood has poor resistance to moisture. Concrete models are heavy and weak performance.

Dimensions baths for bathrooms

Modern baths are made of different materials and may have very different shapes. With a wide range of these products anyone can pick up the necessary model, which is suitable in size to a specific room.

Virtually unlimited variety of shapes and sizes greatly simplifies the process of choosing a bath for the consumer. In form are the following variants of bath:

• rectangular;
• oval;

• round;
• angle;
• sessile.

Features the classic rectangular baths and oval

any material can be used for rectangular patterns. The most common rectangular baths are considered acrylic and cast iron. The standard length of rectangular design is 180 cm. The width of a standard sample tubs - 80 cm.

Classic rectangular models are best suited for standard, small rooms. Rectangular structures may have a length of between 120 and 180 cm. The width of this type of bath ranges from 70 to 80 cm.

Oval models differ in that they are concise and soft shapes that perfectly promote relaxation. Such structures, in most cases equipped with hydromassage equipment. There are also products with integrated air massage.

Among the shortcomings of oval models are the lack of additional elements used for convenience (armrests, headrests). Standard oval bath length is in the range of 140 to 210 cm. For small rooms are best suitable short oval type bath.

Oval bath - the perfect solution for a standard bathtub or to more spacious premises. Materials of construction for the oval model, can be very different. The most common oval design acrylic.

Varieties round tubs

Round bath belongs to the exclusive lineup. Depending on the size, there are two main types of round products:

• double;
• multi-seat.

The basic functionality of such baths is to create a relaxing effect. This is due to the fact that the structure of this form is most suitable for placing hot tub equipment.

The diameter of the circular structure ranges from 140 to 210 cm. No matter what the diameter of the circular model for its installation requires a lot of space. Thus, it is not suitable for installation in a room with limited space. The most correct variant of placing a round bath - organization approach from all sides.

Round design for relaxation are made of the following materials:

• acrylic;
• steel;
• kVAR;
• fake diamond;
• a natural stone.

Helpful information!For older people are often purchased sedentary model, the depth of which varies from 60 to 80 cm.

Comfortable adoption of water treatments in a round bath in the first place depends on its size. To increase the depth of the bath is often used method of flat sides. Such a method allows to achieve increased depth without adding cumbersome.

Corner bath - practical and compact

Corner model rightly baths are considered the most rational choice for a small-sized bathroom. These baths seem bulky and have a specific shape, however, they allow you to organize the space of the room. The most common models are in the form of drops or droplets truncated. bath Dimensions droplets depends on the symmetry of form.

When choosing a corner model, you need to pay attention to the following points:

• corner model can be "right" and "left." This depends on the construction and on to a corner of such a structure is manufactured;
• choice of corner baths should also be borne in mind that it can be both symmetric and asymmetric.

Corner construction made from an acrylic material. If necessary, the bath can be enjoyed and from other, more costly and spectacular material (e.g., artificial stone). In most cases, sanitary products of this type are equipped with hot equipment and other useful functions.

A small tub for a small bathroom

Some flats WC is joinable with an area of ​​3.5 m2. Dimensions of this room is (2,2h1,6 m). The short side of the room, in which the length is 1.6 m, can be used to set the bath. Such an arrangement will place the bath in the room and other sanitary appliances (toilet, sink etc.).

What bath choose to install in such conditions? The most suitable embodiment for mounting in such a situation is a short rectangular tub (120 cm). However, the width of the short side space can be determined and a model long (140 cm). The smallest bath on the market, will have a length of 100 cm.

In addition to the rectangular model, you can install and angular asymmetric. Feature asymmetric angular design is that it has one wide and one narrow side.

Sitz baths for bathrooms: photos and specifications

We should also be said about sitz baths models. Many consumers are skeptical of such products, however, it is still very popular. This is due to the convenience of such structures. Bathtub seat has the following advantages: compact and versatile.

Sitting model - great for hygiene procedures. Especially such designs are recommended for older people, for which a very important aspect when choosing a bath is its convenience.

Note!In some cases, sit-design combined with shower.

In the market of sanitary equipment can meet a large range of sizes sitz baths for small bathrooms. Sit-angle models are used to save the useful floor space.

The use of this bath not only saves space of the room, but also to reduce the consumption of water used for hygiene procedures. Every year, manufacturers are expanding range of seating mini-baths.

What bath choose? Tips for Choosing a bath

Before purchasing the bath, experts advise to pay attention to some nuances of its choice. Consider the recommendations that will help answer the question of how to choose the right bath:

• size and shape of the bath in any case should be selected under the specific area of ​​the room;
• it is recommended to purchase a model, the installation of which is not too difficult;
• bath design should consider the location of water and sewer pipes. Otherwise, there will be difficulties with its installation. Siphon and additional elements necessary for the operation of the bath, you need to buy at the same time with a bowl;

• it is very important to make sure that all auxiliary components were made by the same manufacturer as the bowl;
• It encouraged to acquire the construction in which the individual attention paid to safety for children and the elderly. For the safety and comfort of the bath set knob, and their bottom is anti-slip;
• If you choose this sanitary products must take into account the growth of all family members. bath depth should correspond to the physical abilities of the residents;
• bath before you buy carefully examine its inner surface. It should not contain any defects (cracks, chips, roughness and so on. D.). Inspection of the outer surface is also appreciated;
• it is desirable to buy products from famous brands, as this will reduce the risk of purchasing low-quality, defective construction.

The above tips will help answer the question of how to choose a bathtub for a particular room. In any case, the selection of the required model takes into account the bathroom size and personal preference owners of the apartment or house.

Prices baths for bathrooms

Cast iron models, as mentioned above, it is inexpensive. The price of domestic iron bath ranges from 10 to 15 thousand rubles. International iron products cost about 2 times more expensive.

Cheapest acrylic bathtubs domestic production can be purchased for 7-8 thousand rubles. The average cost of such products is in the range of 10-12 thousand.

Helpful information!In the case of acquisition of the design of any material to be equipped with additional options, the cost is generally increased by 20-50%.

Consider the price of the bath of the other less popular materials:

• Steel - 5-10 thousand rubles;
• KVAR - from 30 to 70 thousand rubles;
• artificial stone - from 30 to 250 thousand rubles;
• natural stone - from 150 thousand to several million.

The cost of the glass bath ranges from 145 to 500 thousand. Less common are the wooden bath, the price of which varies from 200 thousand to 3-4 million rubles.

Many sites that specialize in selling bathtubs, often organize a variety of events aimed at attracting buyers. Therefore, on the Internet there is the possibility to buy a bath for bathroom inexpensively. Overstock baths can save funds, however, you must be careful not to buy products of low quality.