Plaster "bark beetle": photo examples of successful applications of the product

Invoiced plaster "bark beetle": photos clearly reflect this, is today one of the most popular and sought-facing materials, which easy to apply and is able to create not only a beautiful coating, but also to protect the substrate from adverse environmental influences and mechanical damage. Learn more about this versatile material can be found in this article.

Plaster "bark beetle": photo examples and composition description

The name of the material was due to the fact that it creates a surface that resembles a tree structure, pitted bark beetle larvae. The surface of the plaster has a grooved structure. These grooves have a different direction, size, depth, length and accuracy.

Stucco is made up of two fractions: the shallow, as a filler, and a large - granules. Round stones granules are of approximately the same size. They define the width of the grooves, the layer thickness and flow plaster "pitted". Number of granules in the material determines the accuracy of the drawing.

The principle of applying "bark beetle" plaster, video clearly shows the sequence of operations is as follows: when on a flat surface with the help of a metal spatula is applied to the material thickness approximately equal to the size of the coarse fraction, these same granules begin to push the filler, creating sulcus. Making the pellets move horizontally, vertically or crosswise in a circle, by using the rectangular plastic trowel. Thus is formed pattern resembling wood, bark beetles moth.

When "pitted" applying plaster on the surface, should not be too much pressure on the trowel, because the longer and more thoroughly will unrolled the material, the less noticeable, characteristic picture. The surface in this case will be glossy, as when using Venetian stucco in the interior of the house, which represent picture active effect on the wall surface.

Useful advice! Do not stack material is too thick, it becomes a cause for occurrence shortly cracks on the surface.

As part of plaster "bark beetle" contains granules of a certain size, which determines the marking material. Size fractions may be from 0.8 to 3.5 mm. From this, you can determine which approach works the mixture. For example, if the package contains the K20 marking, this means that there are present granule size of 2 mm.

Most fine plaster with grain size from 0.8 to 1.5 mm are suitable for domestic premises decor, and a material with large fractions of 2 to 3.5 mm is used for plaster facades. Photo examples illustrate the resulting textured effect.

Granule size affects the furrow depth of the finish and consumption by 1 m2 plaster "pitted" .tak, compositions with larger fractions have a larger flow than with small inclusions. Plaster of the granules of 2 mm is consumed per 1 kg of 2,5 m². At that time, as the flow rate of the material with the granules of 0.8 mm is about 1.8 kg per m².

It's worth noting that the price for "bark beetle" plaster bag with smaller factions will be much higher. This is due to the complexity of filtration technologies grains.

Otherness "bark beetle" plaster

The advantages of the facing material are:

• the possibility of "pitted" the use of plaster photo facades and rooms inside the building is visually displays, for indoor and outdoor decoration;
• high viscosity and good adhesion to the base material due to the presence of mineral additives and polymeric materials in the mixture;

• environmentally friendly materials;
• light weight surface formed facing material that does not create an additional burden on the wall and the foundation;
• It has improved resistance to mechanical impact;
• material during solidification does not shrink, which prevents its cracking;
• has increased frost resistance, capable of withstanding the temperature to -55 ° C;
• material is resistant to UV exposure and the effect of precipitation;
• capable of withstanding the corrosive media;

• It has good water vapor permeability, which allows the walls to "breathe" and prevents the formation of mold and mildew on the surface;
• the ability to easily staining different formulations of paints;
• a long period of operation without loss of original appearance;
• good lie on the brick, concrete, particle board, gypsum base sandwich panel, polystyrene plates, however, requires the creation of a base layer based on cement or a gypsum plaster;
• affordable price.

Important!Plaster "pitted" should not be applied to wood, metal, plastic or glass surface.

Types of decorative textured plaster for the walls. Photo examples of finishing

Plaster "pitted" can be manufactured on a polymeric or mineral based. Polymeric compositions can be acrylic or silicate.

acrylic-based mixture has good adhesion and improved moisture resistance. Therefore, acrylic textured plaster, photo successful designs clearly reflect this, widely used for lining spaces with high humidity: showers, bathrooms, pools. This material has a good elasticity and a hydrophobic moisture-proof property, and high adhesion to all substrates. He is tinted in the mass, which allows to choose the most suitable color and create a spectacular and durable surface.

Related article:

The technology application "bark beetle" plaster: features and stages of work

Features of the exterior and interior. Methods for applying the material. Embodiments of creating a characteristic pattern.

The main disadvantages of the material is considered a low vapor permeability, making use of appropriate acrylic plaster not only breathable surfaces. Moreover, the coating is fire hazard.

Silicate plaster "pitted" has good vapor permeability, water-repelling, hydrophobic and protective properties. The material has high adhesion with mineral bases, which creates a coating resistant to cracks. Plaster tinted easily and shows the variety of colors and shades that allows you to create presentable and unique surface. This is shown by the photo finish plaster facades of private homes and interiors.

the high cost can be recovered from the shortcomings of the material. Also, prior to the work necessary to perform the priming surface with a silicate mixture. Silicate plaster quickly grasped, so all the facing work should be carried out very quickly.

Important!To obtain the desired color when tinted material ended, and the mixture was Coloranting material should be from the same manufacturer.

Mineral coating consists of a mixture of cement and silica fume. It has a high vapor permeability, fire resistance and resistance to frost, which makes it a perfect material for finishing outside the house. Decorative plaster "bark beetle", this photo clearly demonstrate, can be applied in several ways, is capable of creating a complete and refined look of the building. However, the material can not be colored in the resulting solution, which involves carrying out additional work on the painting of the finished base.

What plaster better? Features popular compositions

Depending on the type of mixture textured plaster walls "pitted", there are features of the technology of applying the material to the surface. Mineral mix plastering requires minimal skills and application of polymer plaster better trust the professionals, because to work with data much more complex mixtures that require a certain experience.

Polymer decorative plaster on the walls, photos amply bear this out, it looks much more aesthetically and more attractive than plain mineral. It is sold as a turnkey solution fully suitable for the application. It is only necessary zakolerovat material paint the desired color.

Mineral plaster is produced in the form of a dry powder in bags, which requires the preparation of a working solution, but its cost is much lower acrylic. Another undeniable advantage of the polymer blend before the heavy mineral composition is relatively small "pitted" flow plaster, which is about 3.2 kg per m². At that time, as the mineral material it will need about 4,5-5 kg ​​per m². They also do not require subsequent painting of the finished surface, which reduces the time of work.

Polymer plaster is more elastic, which prevents the occurrence of cracks during the thermal expansion and shrinkage of the building material. The mineral mixture is not plastic enough, so it is better to apply after the building will shrink.

Useful advice!To eliminate the occurrence of blistering and delamination on a facing surface of a polymer plaster "pitted" should be applied to completely dry basis.

The polymer compositions are more durable and resistant to any kind of mechanical damage and pollution of nature. However, the material cost is considerably higher than the mineral analogue.

Decorative plaster "bark beetle". Price of the material and the cost of works

"Pitted" The cost of plaster depends on certain factors:

• type of material: dry or finished, a polymeric or mineral;
• type mixtures: for interior or exterior;
• size filler granules;
• the country of manufacture.

The price of liquid plasters for walls, photo graphically represent the appearance of the material will be higher than the mixtures in the dry state. Thus, for example, mineral plasters bag will cost 430 rubles., And for the finished mixture will have to pay at least 500 rubles.

Among the well-known manufacturers of textured plaster "bark beetle" Ceresit can be distinguished company, "Baumit" Kreisel, Bergauf, Knauf, "Bolars" and "loofah".

The cost of the decorative plaster "Bolars" domestic producers is about 390 rubles. per bag. At that time, as the German blend "Krayser" or "Ceresit" of the same weight would cost 450-700 rubles. per bag.

To the material, which is used for decorating outdoor work, increased demands for quality and durability. therefore facade plaster It will be more expensive, ranging from 550 rubles. per bag. At that time, both for in-house work can buy decorative plaster "bark beetle" for only 400 rubles / bag.

You can also prepare a plaster "bark beetle" with his own hands from the dry ingredients. manufacturing process itself is simple, but the difficulty lies in the strict observance of proportions that can not always be done at home. Therefore it is better to buy ready-made dry composition from the manufacturer.

Today, many construction companies are offering their services on the implementation of the lining of internal structures and external surfaces of a building plaster "bark beetle". Price per m2 of work depends on the complexity, the base area, the presence of preparations, species facing material and the technology of its application.

If you want to perform a simple finish building facade finish plaster "bark beetle", the cost of works will be about 350 rubles / m² (at 150-350 m² surface area). If the area is smaller, then the price for the performance of the lining will start from 400 rubles. 1 m². When decorating the internal walls of the room plaster "bark beetle" price per m2 works will be about 300 rubles.

If you need to perform additional preparatory work in the form of installation of reinforcing mesh and insulation to plaster "bark beetle", the cost of works will be increased by 150-180 rubles / m².

After performing the surface facing plaster "pitted", the price of operation may comprise additional painting covering layer, which is about 500 rubles / m².

Features plaster "bark beetle" Ceresit

The most popular brand that produces high-quality finishing materials, the company is considered Ceresit. It produces all kinds of plaster "bark beetle" with a different grit.

The mixture is ST-35 pigmentizirovannoy mineral plaster. granule size can be 2.0; 2.5 and 3.5 mm. Depending on this, the material will flow respectively 2.8; 3.5 and 4.9 kg / m². This composition is resistant to weathering, impact loads, has an increased cold resistance, water resistance and vapor permeability. He suggests painting the finished surface with the use of acrylic, silicone and silicate paints. Price plaster "bark beetle" Ceresit mineral based is 550-750 rubles.

The material is ideal for lining the front of the house. Photos private buildings, plaster mineral that performs "woodworm" structure shows that it is possible to create a durable and beautiful building coating using an inexpensive fabric.

A good solution is also the use of mineral "pitted" plaster for interior works. This material can be used for walls balcony or loggia, which will create an additional layer of insulation.

Useful advice!Do not use plaster CT 35 for facing surface of plasterboard, plaster and chipboard.

Acrylic plaster ST-63 and ST-64 with a grain size of 3 mm and 2 mm, respectively, are elastic materials resistant to mechanical damage and moisture. This material can be used like stucco for external walls, and inner surfaces of any material, including chipboard, gypsum and gypsum board. However, it is worth considering that, due to its technical characteristics, the plaster can be used for lining the base of the building. Flow plaster "pitted" ST-63 was 4.5 kg, and PT-64 - 3 kg per m².

Silicate mixtures PT-73 and PT-75 are flexible, easy to work, and mechanically resistant weatherproof, vapor-permeable compounds that are applied to concrete, brick and stucco surface. Plaster walls "bark beetle" CT-75 will not only aesthetic surface, but also give it thermal insulation properties. This material can also be applied to the foam. Consumption per 1 m2 "pitted" plaster is 3 kg for mixtures with granules 2 mm, and 4.5 for the lining material with grain size of 3 mm.

Plaster CT-175 presented silicate-silicon mixture, which brings together all the advantages of silicone and silicate plasters. It is resistant to precipitation, has a high rate of moisture resistance, resistance to UV radiation, as well as dirt and shock resistant mold and fungus. Flow plaster "pitted" on 1m2 of 3 kg.

Where textured plaster "bark beetle" can be used?

Today, for cladding facades of private houses, public (hospitals, schools), commercial (clubs, restaurants, bars) industrial, administrative buildings, staircases and interiors of apartments is widely used textured plaster "Bark beetle". With their hands, the video clearly shows the sequence of steps, you can easily apply the mixture to the surface to get a unique picture, which is totally dependent on the imagination of the artist.

The apartment, plaster "bark beetle", a photo is visually display, used for lining hallways, corridors, eating area in the kitchen, as a decorative arches, columns, walls, and even for finishing ceiling.

Note!For finishing flat, it is possible to use plaster walls without beacons if the surface is pre-aligned and filled.

This material can be applied to any base which possess good adhesion and did not sag with time. This applies to the surfaces of the drywall, brick, concrete, cement and particleboard.

The material may be applied to the insulation system, specially prepared for the "Bark". For the front of the house, it can be a mesh for thermal insulation systems, reinforcing mesh, primer CT-16 ( "Ceresit"). plaster is applied to interior decoration, putty, primer and PT-17 ( "Ceresit").

The textured plaster walls, photo graphically displayed deposition process, is a finishing coating which is applied a thin layer, slightly exceeding the diameter of the granules. Therefore, the base before applying textured plaster should be well cleaned, repaired all the cracks and hollows, align and primed.

Useful advice!Do not use "bark beetle" plaster to fill the dents on the wall surface. It can only hide minor flaws. A thick layer of material will look roughly and presentable.

Very often, for the design of a unique interior, textured stucco walls, pictures on the Internet clearly it is confirmed, it is combined with other materials, which allows to implement the most unusual design solutions.

Making your home facade plaster "bark beetle". Photos private buildings

For facing the decorative plaster facade of the house, photo suburban mansions confirm the relevance of the material, is commonly used acrylic or mineral mixture.

Using this material, you can create a unique pattern on the facing surface, which successfully emphasize the selected style of the house. Plaster "bark beetle", photos of interesting combinations and colors, can be painted clearly confirm this in any color, which creates additional variations for the realization of design intent.

With "pitted" plaster facades picture using the material, as presented in This article clearly indicate that it is possible to create a presentable and a perfect view of the building in any style. Very often this material is used for exterior surfaces of buildings, designed in a Japanese direction, Art Nouveau and Provence.

Today is very popular combination finishing facade of the house with stone and plaster. Photos of private homes, made in this direction, emphasizing harmony, originality and uniqueness of daring design decisions.

With decorative plaster facade of the house, photo-storey buildings visual confirmation can be given to the aged look that is sure to allocate it to the fore among the other buildings.

Plaster "bark beetle", photos of houses and interiors with its use demonstrate the popularity of the material is a natural, versatile, strong and durable facing material. He is able to create a solid base protection against mechanical and natural influences, but also makes it possible to realize any design concept.

Facing surfaces plaster "pitted". Video slideshow