Table lamps with your hands: the room addition design

Everyone wants to make your room unique. Table lamps with their hands - one of the original ways to complement any interior. Even despite the fact that now the malls are full of a variety of forms, colors and designs lamps, the device still made their own from scrap materials, will be an occasion for pride. Of course, it will have to try to take the time and show imagination.

Table lamp with your hands: the main advantages of the product

Table lamps are not considered major sources of light, their main task - additional, directional light to the desired location. This device is most often set it on the table, which for the most part is not covered enough. A limited amount of light in the workplace can not only lead to problems with visual organs, but also provoke diseases of the musculoskeletal system.

Important!Desktop products, a light source from which does not rise above a table - it's not a lamp and bedside lamp. Their main purpose - creating the muted light, relaxes the nervous system and allows a person to relax.

Especially important is the installation of the luminaire is the place where the acute shortage of natural light present. It should be competent to fix the device on the table. The basic rules of the placement table lamp:

1. If the main purpose of the device - providing light when working at a desk, it must be installed, taking into account what kind of hand written by a man: for left-handers - left, right-handed - right. In this case, normal operation will not disturb a shadow falling from the hands.
2. In any situation, for whatever purposes or used lamp, it must rise above the surface of the table at least 35 cm, but not more than 40 cm.
3. If the board is also monitor lamp must be greater than its upper edge.
4. It is important that the light from the lamp does not fall directly on the face and blinded.

All of these rules apply to both self-made fixtures and purchased. Homemade lamps, compared with available in retail outlets models have their advantages, which include:

1. Exactly the right size. Before you make the lamp with your hands, you should carefully choose the installation site and available free space, which would make it ideal for size.
2. Harmonious match the interior. Beautiful table lamp made independently, always in perfect harmony with the interior, because the material and color are selected taking into account the design of the room.
3. The only product of its kind. If you view the photos of table lamps made with their own hands, do not get to meet two of the same version. Even if the products are made in a similar pattern, they will still be different features or some small details.

Table lamps with their hands: components of the product and its varieties

The main condition for when selecting the type of fixture - define the tasks that it will perform, and already the basis of this proceeding. If the main purpose of a table lamp - lighting, should think carefully about the shape of the ceiling and the leg structure. If the main function - lights, it is necessary to focus on a simpler form, but for a lamp can be used most simple option. If you look at the lamp, generally includes such details:

1. Column. The main element that provides stability to the table lamp.
2. Diffuser lighting. The most visible part, this can be a shade or cover. It is made with their own hands lampshades allows harmoniously fit into the surrounding interior of the device.
3. Cord. Serves to connect the lamp to the power supply, the plug must be present at the end of the cord. If you make the unit on the battery or batteries, this element can be neglected.
4. ON / OFF button. It allows you to adjust the operation of the device without disconnecting the power cord directly from the mains.
5. Light source. This refers to the light, which provides illumination. Selected based on the type of the ceiling, the necessary lighting and luminaire destination.
6. Fixing the ceiling. Tend to produce good location light diffuser.

The most popular types of table lamps designs

Based on the purpose and design, highlighted various options for table lamps. The most popular is considered a desktop rack lamp, because it covers a vast space the working surface or the dresser and thus easily moved to the desired position depending on the needs.

Another advantage is considered that such fixtures is easy to decorate, and the technical side of the issue is quite simple. Before you make a table lamp by yourself, keep in mind that this product must not be adjustable in height, but adding the unit thyristor power regulator, will change light intensity. As well as the light, evenly incident on the surface of the table, reducing eye strain and prevent fatigue. There are other types of table lamps (photo - proof) that you can do yourself.

On a hinge. Such lamps are more suitable for people with analytical mind than creative individuals who love to engage in decor. Before you make your own hands at home a table lamp on a flexible arm, it is worth considering that to make such a structure is not so simply, as the price of the finished product is likely to be higher than the cost of purchased option. The main difficulty in the creation of this model, as opposed to the rack fixture is that it takes more effort to ensure electrical safety. Of the benefits you can provide the ability to adjust the angle of incident light.

Cantilever lamps. They differ large weight due to the fact that development requires a heavy base, firmly holding the device on the surface. These lamps, like the rack, not adjusted for height or angle, but give a good light.

The most easy and secure in performing the lamp is considered flexible light tube, which will serve as an excellent night-light in the room. It is important that you connect your products do not need to plug, because the lamp can be powered by batteries, several tablets having a voltage 3W. Required for the manufacture of LED and fluorescent tube transparent liquid.

How to make a lamp with your hands: the technical side of the issue

If we talk about the internal filling of the lamp, here everything is extremely simple, because the device consists of a power plug, cord, switch and lamp holder. Those who are not alien to the technical issues, can complement a homemade instrument voltage regulator. Whatever the cartridge has been selected, it is attached to the thread or a steel plate.

Useful advice! The best option for self-production is considered luster holder with cap threaded flanges, because how easily clamped therebetween steel faceplate which serves to mount the lampshade frame or yoke for mounting on hinge.

The main requirement for devices - electrical, as by making a table lamp with your hands properly, you can not only cause a short circuit, but also damage the wiring. To avoid this, experts recommend first of all to choose the right cord, which should be round, having a double insulation.

Places where the cable must be protected with thick dielectrics. To prevent the violation of the integrity of the cable, prior to introduction into its small knot tied channel and pulled through the locking hole of the dielectric puck. Only after all these things done, you can start decorating and external decoration.

It should be clarified and the way the pull cord for the lamp on the hinge. So, if the whole unit bracket, wire cord at the top, left or center and securely fastened to the mobility of the knee. If the hinge is a tube, it is better to skip the cable inside, but to the necessary length of the cord you need to add extra centimeters, which will be enough for flexion / extension lamp.

Special attention should be paid to the place where the cable from the bracket goes to the illuminator: you need to leave an additional 8-10 cm length, because like lamp design provides significant repositioning the ceiling that must be considered when choosing the right network cord. Advance should consider and method of attachment of the hinge of the lamp. Most often used for this screw or clamp. Craftsmen recommended for this use joiner clamp, which, unlike the locksmith, has a soft coating.

Related article:

Table LED lamp: efficient and modern way of lighting company

Advantages and disadvantages. The most important parameters are: power, light output, color temperature. Popular manufacturers.

Lamps with his hands: photo and principles for selection of bulbs for instrument

The first thing you should look for when choosing a lamp for a homemade lamp - power, which determines the amount of energy produced by a light bulb. For a desktop lamp index ranges from 40 to 120 watts. It is important to consider the type of material from which the device, since it is on this criterion will depend on fire safety. For example, an incandescent lamp, even relatively low power (60 W) for continuous operation can become cause melting of the plastic lampshade, destroying the integrity of the wooden ceiling or even ignition of tissue.

It should also pay attention to the indicator of lumens that determine the amount of light coming from the lamp. Accordingly, the higher the value, the brighter the light the lamp, but the lamp Table option should not be selected above 1000 lumens. It should be noted that depending on the number of lumens approximate artificial light to natural light. There are other points to consider when choosing a light bulb.

The form. The traditional view is considered to be pear-shaped bulb. It should be said that this form are not only incandescent, but with modern energy-saving fluorescent options. In addition, there are spiral-shaped lamp, a candle or tube. Selecting the product as a whole depends on the design of self-made the ceiling.

The size of the cap. Repair of a desk lamp, which is changing the light bulbs, it is much easier to perform in the presence of a standard E27 base. In other, not less than claimed embodiments are E14 or E40. Modern LED table lamp with your hands have a bayonet socket, which is characteristic only for this type of light bulbs.

Life time. Basically manufacturers on the packaging indicates the approximate period of use of the product, but in most cases, this figure depends on the proper use and characteristics of supply electricity. Logically, it will fail quickly with frequent surges lamp of any class. Among the greatest of all lamps lifespan different LED products.

The nature of light. On the instructions to the instrument indicates what kind of light will emanate from the device (it can be cold or warm). The choice of light depends on the heat picked up the glass and its color, as well as the basic functions to be performed on the device.

Energy consumption. If you plan to use a desk lamp as a night light, you should choose the most energy-saving light bulbs that will save on electricity. Despite the fact that you have to overpay a little when purchasing light bulbs, utility bills will be lower.

The presence of hazardous substances. Fluorescent lamps contain mercury inside, so it is dangerous to establish a benchtop instrument in a child's room. These lamps must not be disposed in the trash, because they need to be disposed of properly to prevent environmental pollution.

How to perform the lamp out of the bottle

Table lamp out of the bottle, made with his own hands in the first place, does not take much time, and secondly, will be the perfect complement an interior room. The most important advantage of such a product is considered to be its exclusivity. The following will be presented to a small master class fixtures with their own hands, for the manufacture of which need these components:

• Glass bottle;
• goggles, a mask and gloves for safety;
• a cutter for glass;
• light;
• carried out with the switch and the cap;
• Wire any liked color;
• sandpaper;
• screwdriver.

Before you start production, should be carried out preparatory work. This will require a wash and dry the bottle and clean the surface of the label and adhering glue. To label moved easily and does not leave traces of glue, you can use a hair dryer, and then removed the remains of any solvent.

Useful advice! packaging is better suitable for the manufacture of the lamp out of the bottle, considerably expanding to the bottom. The wider bottom improvised lamp, the more stable it will be.

After the surface is cleared, it is necessary to put the bottle in a cutter, glass cutter adjust to the desired level and turn the bottle to get a straight cut. Then it is placed for a few minutes to "douche" as long as it does not fall apart over done slice. For greater smoothness and precision of the cut should go with sandpaper. Wire gently pulled through the neck of the bottle, whereupon the cable is fastened to a lamp socket. That the cable is firmly held in the neck is inserted into the appropriate size Chopyk.

At the end of the work to begin decorating the walls of the bottle. You can use the wire or thread of a suitable color. Very original look glued glass stones of different colors, are easy to find in large DIY stores or retail outlets specializing in the sale of furniture items.

If there is no place to take a glass cutter, but there is a drill, it is possible to perform a lamp from a single bottle. In this case, only be able to use a small LED bayonet bulb in the form of candles, which will be able to climb into the neck. To produce taken any size bottle in which the bottom of the hole drilled for the cable which extends through the neck. After mounting the light bulbs start manufacturing a lampshade or decorate the bottle on your own.

Wooden lamps and floor lamps with your hands: the photo of original ideas

Exclusive floor lamps and table lamps made of wood in the outlets will cost a lot, which is not the instruments he made himself. Most can easily design a device, those who have in the presence of a lathe. In this case, a self-made lamp of wood can be performed with the use of the trim rod, the length of which shall correspond to the selected height of the device.

If the machine is not present, as available material is allowed to use trunks of trees or shrubs of small branches. The main advantage of this material - no need to over-treatment, because even untreated wood will look attractive, especially if it has an unusual knot or crust elements.

In addition, you can use a solid piece of wood from which the bark is removed, and the surface is well polished. In the center of the bar is drilled a hole through it extends the cable, which then fastens the lamp. For manufacturing a lampshade body used independently formed from a wire which is then fitted by paper, cloth or decorated using vines or any other available material.

Useful advice! The material used to create the lamp can be taken on the basis of unfit table lamp or use unnecessary chandelier, broken lamps.

In the case where there is a lathe should first sketch drawing of a table lamp, which would like to see as a result of the work, and to pick up a bar of desired length. If you want to make a long leg lamp may have to collect it from several parts. Milestones are as follows:

1. Wooden beam is fixed in the machine and grind the chisel by means of which it is given the desired shape. Reliable only establish a table lamp with a cylindrical base shape.
2. cutter through the applied patterns of any shape that will match the surrounding decor.
3. The finished base is polished with sandpaper until the maximum smooth state to avoid getting splinters when the article transference.
4. With drills inside the processed bar is drilled a hole through which a cord extends the desired length.
5. For greater stability further cut wooden stand, whose diameter should be 40-50 cm.
6. The finished product is lacquered and decorated as desired.

The main methods to update the shade for table lamp with his hands

If the house has an old table lamp, which is not suitable for any parameters not should immediately throw it away, because, using minimal effort, you can give a new lamp a life. Even if there is an old lamp can be made lampshade frame for table lamp yourself. You will need to get a pair of pliers and a thick wire. The main advantage of using a flexible wire is that the lampshade can be given any shape. For processing by a frame used a variety of options, such as:

• camera roll;
• beads;
• wallpaper;
• knitted cloth and lace;
• plastic;
• grid;
• the cloth;
• thick paper.

To make a lampshade made of paper, you need to take a tough material that will last longer. For example, the cover of the dense non-woven wallpaper will differ and appeal and strength. Rice paper can be used to restore the old lampshade, lost appeal. The most popular option is considered to be a lampshade in the form of an accordion, which will need to create a scrap of wallpaper around 50 cm width 30 cm. For this wallpaper neatly accordion folded and then the resultant honeycomb base awl, and the laces are threaded into the hole, after which the glued construction.

Another attractive option is considered lampshade of metal mesh, which is sold in stroymagazine and trimming can search in a garage or in the country. Due to the compliance of the material can obtain a product of any shape, but are more popular diffusers in the form of an ellipse or a sphere. Creating a foundation, it is decorated with laces, pendants, carvings of beads or any other decorative elements.

Independent production desk lamp only at first glance seems complicated. By and large all the necessary parts can be purchased at any hardware store, and the missing tool is easy to rent. Besides, it does not require much time for fabrication exclusive of lamps. If all the material available, it is possible to construct a table lamp in 1-3 days - it all depends on the selected materials and design features.