How much timber in a cube: methods of calculation and calculation examples

Lumber - is a common building material, which is used for construction of houses, baths and various outbuildings. Its range is quite broad. When counting is necessary to accurately calculate how much lumber in the cube, as these data can be necessary at the time of purchase, as well as for further calculations. There are several ways to carry out this kind of calculation.

How to calculate the cubic meter, and what does it do

Most often used in the construction materials made from wood. In this case, it is very important to know how to translate meters, corresponding to the length of the segment in the cube (or vice versa). The cost of different products on the market may be specified in different units. Often, sellers set the price per square meter, so they also need to be able to determine.

To answer the question of how to calculate the cube to remember one important rule: this unit corresponds to the volume equal to the volume of material and the cube edge length of which is 1 m.

There are regulations, approved by the state, which indicated that the wooden building materials must have measurable data (indicator section and length). This rule allows you to easily calculate how much lumber 150x150 in the cube, as well as the number of beams of any other size.

In turn, the section size is determined quite simply. In order to calculate this figure, you need to pull back 100 mm from the edge of the timber or board and measured by the line width and height of the product. Next, you simply multiply these parameters.

Helpful information!To calculate the volume of timber 1 will need to take the previous value and multiply it by the length (length) of the wooden articles.

After the above calculations, you can easily calculate how many bars in the cube. Such simple calculations make it easy to navigate the market value of the wood products. As well as using this formula is much easier to determine the required amount of material is required for the construction of a design.

How much timber in a cube: Features of the calculation of different materials

In the market of building materials you can buy many varieties of wooden beams and planks. They mainly differ in their geometrical parameters, but do not forget about the form. Consider which wood products are the most used in the construction of private houses and various annexes:

• timber;
• Edged and unedged board;
• decking;
• wall paneling.

It should be noted that the pieces of wood and edged board are the most common materials, demand is highest. In order to determine how much lumber 150 150 in the cube, you can use one of three ways: online calculator, formulas, tables.

To calculate shpuntovki, you must only use indicators that were measured without taking into account the ribs (dowels). The parameter area without projections coincides with a similar number already laid material.

In turn, the amount of siding is generally measured in meters, corresponding to the normal length. It is very convenient as it does not require translation into other units. The same goes for the OSB-boards. Therefore, the method of determining the amount of these products is the easiest.

The most difficult is the calculation of lumber called edging board. In order to calculate the amount of material in cube 1, it is recommended not to carry out an independent calculation widths, and view the arithmetic mean. Otherwise it would be difficult to determine the number of products in the cube.

If necessary, use a simple way of calculating an indicator of lumber. For example, a very popular special online calculators located on specialized sites. And you can also use another method of calculation - tabulated.

Calculation using the online calculator timber

With special calculators that you can easily find on the network, calculates the amount or volume of a wooden beam. It is important to note that this program allows for the calculation of both laminated and profiled varieties of material.

Online calculator allows you to perform a calculation of timber needed not only for the construction of a residential home, but also for baths or pergolas. The main advantage of this method - a high calculation speed. With this application, you can determine how much paint you will need to paint the surface of the timber, the quantity and value of pegs, insulation, wreaths and so. D.

Thus, the online calculator performs automatic calculation of most of the indicators required for the construction. It is very important to choose the right kind of timber and indicate in the appropriate boxes, signed for easy, accurate data.

Note!If a mistake was made, the calculator will give incorrect totals, which is fraught with lack or, conversely, over-expenditure of wooden materials. Therefore, when filling the cells need to be careful.

Accurate data that define the kind of material that can be learned by reading with the estimate for construction. When using the calculator timber to build a house you need to remember one important rule is to determine the cube you want to know the length of the woodwork. It should conform to the standard value is indicated in SNIP or tables (e.g., 3 or 6 meters). Noticeably, these parameters are rounded and the arithmetic mean value of length.

Experts recommend a start when choosing this index on the length of the walls built in the future.
Consider what parameters will be required in order to calculate how many pieces 150h150h6000 timber in a cube or volume. Primarily need to measure the width of the product, as well as its height. Both figures are calculated in millimeters. Next, you need to fill in the column that corresponds to the total length of the walls. Moreover, the figure must be fixed taking into account the internal partitions, always in meters.

Then fills the cell where you want to enter the height of the walls (in meters), and then specify the area of ​​window and door openings. This index is calculated in square meters. It only remains to fill the column, indicating length of the rod in meters.

Calculating the number of beams in the cube: the formula

The cubic capacity of the board 1, as the amount of wood cube determined using similar formulas. For clarity, it is necessary to examine step by step example, which will independently calculate the required value of the timber. As we mentioned above, to calculate the need to define the following parameters: measure the length, width and height of the beam.

To avoid confusion in the calculations, experts recommend translate millimeter value in meters. For example, in order to determine how much of 150x150 timber in a cube, you need to replace the section size to a more appropriate figure (0,15h0,15). Accordingly, the length indicator remains intact, as it is already calculated in meters.

Next, you need to use the formula directly, allowing a very fast and easy, and most importantly, on their own to figure out how many will be 150x150 in the cube timber. Consider this mathematical expression:

V = L x b x hWhere:

L - length of the board;
h - height indicator;
b - the width of the display.

Thus, it appears that it is necessary to multiply the length of which is selected depending on the individual characteristics of construction (e.g., 6 m), the width and height (0,15h0,15). As a result of formula ready (with the substituted at the desired place numbers) will be as follows: V = 6 x 0.15 x 0.15. The result of the mathematical expression will be the figure of 0.135, which is the volume of the bar. Further, using this value to determine the number of 1 cubic meter of timber.

Note!It is important to remember that such a formula is needed to calculate the volume of a single timber. At the same time it is the first item in determining the amount of wood products in one cubic meter.

How timber cube 150h150h6000: Formula

In turn, to calculate the amount 150h150h6000 timber in 1 cubic meter, it is necessary to divide the 1 m³ at a value that was obtained previously, that is, the volume of 1 wooden products. Itself a mathematical formula is as follows:

N (pcs.) = 1 m³ / V

The formula of the substituted values ​​with the shelf in this case will be:

1 m³ / m³ = 0.135 7 pcs.

Thus, the answer to the question about how many pieces in the cube timber 150 150 is the number 7. It now remains only to find out the price of 1 bar. This will require multiply unit volume defined by a first formula, the value of 1 cubic meter of wood building materials. Approximate price bars of this size is 6500 rubles. Therefore ready mathematical expression with the solution would look like this:

0,135 x 6,500 rubles. = 877.5 rubles.

It turns out that the price of 1 bar with a length of 6 m - 877.5 rubles. Determine the cubic capacity of the board and the amount of wood products, contained in 1 cubic meter, it is not so difficult. The same mathematical calculation tells you how many units 100x100 cube timber. Experts recommend the use of the formula, as they allow you to perform the most accurate calculations. This is due to the fact that some tables have rounded values.

How many cubic meters of timber in the cube (100 by 100 mm)

Similar calculations can determine the amount of any lumber, geometric parameters that can be measured (such as timber 100 to 100 in the cube). The length of these wood products may be any, but by 6 m beams are most common. To calculate using the same mathematical expression, aimed at finding the volume of a single piece. If we substitute all the values, the formula can be obtained as follows:

V = 6 x 0.10 x 0.10

As a result, after multiplication of all values, we get the answer to the question of how many in the rod 100x100 cubes, namely 0.06. This number is required for further calculations.

Next, as in the past, the calculation, just divide 1 by the volume of one cubic meter of timber. The solution to this formula is the number 16. Thus, the number of pieces of wooden products of this type contained in one cubic meter is defined. At the end can only hold pricing of timber.

Calculation of sawn timber using the cubes table

The table is a very fast way to determine the required quantity of 1 cubic meter of timber. It acts as a crib, which lists ready data obtained after the corresponding calculation. In addition, the table can be taken for any desired number of mathematical expression.

Table 1. Volume 1 pc. 1 cubic meter of timber in

timber dimensions, mm	rod length, m	The volume of timber 1 m³
150 200	6	0,18
100 100	6	0,06
50 to 150	6	0,045
100 150	6	0,09
50 100	6	0,03
150 150	6	0,135
100 200	6	0,12
50 to 50	6	0,015

It is also very important to know how much timber in the cube (6 meters). Tables of this type are quite a few. Consider the bars with the most common size. This information is useful in calculating the amount of material that will be required for the construction of a particular building.

Table 2. Number of bars per 1 cubic meter

timber dimensions, mm	rod length, m	The volume of timber 1 m³
150 200	6	5,5
100 100	6	16
50 to 150	6	22,2
100 150	6	11
50 100	6	33,3
150 150	6	7
100 200	6	8
50 to 50	6	66,6

The above tables provide data on the lumber, which are the most common and used today. On the internet you can easily find detailed information on this issue. At specialized sites posted the full table, including all sizes.

How many square meters in the cube timber

As mentioned above, some manufacturers sell lumber in square meters. Sometimes calculations can also be carried out using the unit. In any case, before you begin to build a house or a bath, you need to learn how to convert cubic meters in quadrature.
Pieces of wood may have different dimensions. Consider as an example the calculation of squaring beam having dimensions 150h150h6000. First of all you need to convert millimeters to centimeters. This will help to find out how much one square meter cube.

Helpful information!After conversion value width, height and length data indicators correspond to figures 15, 15 and 600.

Further, the thickness of the timber is required, which is 15 cm. This value must be divided permanent indicator that denotes the length of one face of the cube in centimeters (100). The mathematical expression that indicates how many meters cubed, with the substituted values ​​will be as follows:

100 / 15 = 6,6

Thus, one cubic meter contains 6.6 m2 timber having dimensions of 150 150 to 6000. To calculate the cost of the material would simply multiply the number of square meters for the price. For example, if timber 1 m² seller asks for 5,000 rubles., Then the cost of 10 m² will be 50 thousand. rub.

Review of prices per cubic meter timber depending on the material and dimensions

There are many varieties of timber, which are graded according to their size and manufacturing material. Very popular softwood lumber. Options for their treatment may vary. Today on sale more often, you can find classic pine timber edged type 100 to 150, the cost of which ranges from 6,500 to 7,500 rubles. for 1 cubic meter.

It is important to know that the price is affected not only the type of wood and the dimensions of the product, but also its quality and compliance with technical conditions at the factory. This is influenced by tree age, the conditions in which it grows, and so on. D. In addition, in some regions, the price on certain tree species above, since it depends on transportation costs.

Price bars from the needles 100 to 100 of about 6500 rubles. for the same amount. Eaves products from the same material 150x150, which were made according to technical conditions (TU) are realized at a lower cost, namely 4500-5500 rub. Knowing the number of beams in the cube will not be difficult to perform the calculation of the total cost of the material.

To date two types of beams are the most costly: cedar natural humidity for 150 and 150 profiled dry pine 140 to 185. The cost of 1 cubic meter of the first product ranges from 9500 to 17000 rubles. The bars are made from dry pine can be purchased in the construction market for about 12,000 rubles. Their cost is due to a non-standard size.

How much is a house from a bar: a review of prices

The final cost of construction of residential houses of timber affected by several factors. First of all - this is the home area of ​​the future, as well as the number of floors, type of foundations (foundation) and features interior finishes at the end of construction.

Related article:

How many boards in a cube: how to make calculations using different methods
Methods for calculating the number of boards in the cube. Lumber species and their features. Calculation of the volume and number of boards according to the formula. Table. Online calculator. The price of the board.

The cost of material needed for the organization of walls and partitions can be different. As of today, you can buy three main types of timber:

• normal;
• corrugated;
• glued.

Note!Depending on the cross-sectional shape isolated square and rectangular varieties of these beams. For the organization of external walls made use timber, which has dimensions of 150 by 150 or 150 by 200 mm.

What is the cost to build a house out of the ordinary timber? These beams are cheaper than profiled, but they have one major drawback. The walls of this timber require mandatory exterior trim. Such a necessity due to the formation of gaps in the walls after shrinkage. After the finish, as a rule, the cost of a conventional timber is equalized with the price of corrugated timber.

How much is profiled timber? These products will cost the buyer more expensive. However, this material has several advantages. It does not shrink after assembly, as well equipped with grooves and ribs system that facilitates docking of dense individual elements. In addition, the walls of profiled bars do not need the exterior finish, because they have a high thermal insulation value, as well as presentable appearance.

Glued wooden beams are most costly. This is due to the high quality timber and its manufacturability. Brus this type consists of several layers, which are represented by the dried wood. The walls are made of profiled beams, do not sit down and slightly susceptible to cracking, which affects the operation of home life.

The cost of a single-storey house made of timber, range from 220 to 600 thousand. rub. Price depends on the size of the log, and the number of walls in residential construction.

What else to consider when choosing a lumber and counting

There are some nuances that are worth paying attention before you begin to count the building material. For example, not many people are aware of this option, as the length of the product technology. This definition denotes a real length of the beam or board, which often exceeds the averaged 50-100 mm.

When selling a given timber must be oriented to the standard a length of 3, 4.5 or 6 m. There are other less common dimensions. Thus, the seller has the right to add additional centimeters to traditional values. In general, not so hard, knowing the necessary values ​​to determine how many pieces 150h150h6000 timber cube. The price of these products is calculated quite simply.

Helpful information!experts recommend to measure its basic parameters before purchasing the timber. This is due to the fact that any real deviation different from the stated linear meters, can lead to serious errors in the calculation. Especially this rule is applicable in situations where the bulk of the material is quite large.

In addition to the basic geometrical parameters, it is recommended to pay attention to the weight of the timber. It is important to remember that this figure does not depend only on the size, but also on factors such as the density of the wood and its moisture content.

In any case, you need to be careful when choosing the material. During the calculation preferably several times to check its accuracy. And no matter what method is for this purpose used. If necessary, you can always ask for help to specialists who will conduct a competent account not only bars but also all the materials needed to build a house or a bath.