Skirting for baths: neat and practical design of the joints

click fraud protection

SHARE
in social networks

FacebookTwitterOkGoogle+PinterestVk

No matter how you try to install a bathroom close to the wall, making it ideal not work. Since completely smooth wall is not in any house, then one way or another will remain a small gap, which will fall into the water. Previously, to solve this problem using mortar in combination with oil paints. However, now there are more modern and simple solution - a plinth for a bath. Consider all possible options for processing the curb, as well as their features.

Skirting for baths: neat and practical design of the joints
Skirting for baths protect walls and floors from the water and becomes a harmonious decoration of the bathroom

Content

  • 1 Especially the selection and application of fillets bath
    • 1.1 Skirting for baths: the variety of materials
    • 1.2 Plastic border for a bath
    • 1.3 Ceramic border for a bath
    • 1.4 Advantages and disadvantages of ceramic border
    • 1.5 Self-adhesive tape curb bath
    • 1.6 Acrylic plinth bath
    • 1.7 Curbs bathroom made of natural stone
  • 2 Installation of baseboards on the bath with his hands
    • 2.1 Plastic moldings on the bath: how to glue yourself
    • 2.2 Installing ceramic curb their own hands
    • 2.3 How to install ceramic skirting Bath Tile
    • 2.4 How to install ceramic tile on the border

Features selection and application fillets bath

Apart from the fact that the open slot behind the bathroom does not look aesthetically pleasing, open joints can cause the development of mold and mildew, that first of all, is not safe for health. That's why care must be taken to seal it and buy a curb to the bath.

Border bath protects against ingress of water and prevents the development of mold and mildew
Border bath protects against ingress of water and prevents the development of mold and mildew

Moisture entering the joint to dry for a long time and often leads not only to the development of unwanted microorganisms, but also to the emergence of corrosion processes on metallic elements, beyond the bathroom. And as to prevent these processes is much easier than to fight them later, consider what you can do to avoid it.

In the process of selecting the plinth should consider the following points:

  • the cost of the material from which made the border. It is worth noting that a simple and accessible model can not boast a long service life, so if you want to solve this problem only once, will have to spend some money on it;
Modern borders not only solve the problem of moisture ingress into the gap, but decorate the interior
Modern borders not only solve the problem of moisture ingress into the gap, but decorate the interior
  • the material used for the walls, and largely determines what should be the baseboard for a bath. More often than not become a border of the same material. If the wall design you use plastic or fiberglass battens, the ideal solution would be a plastic plinth for acrylic baths quite suitable acrylic plinth. Ceramic or stone curbs are appropriate in that case, if the walls are tiled bathroom;
  • gap value - another crucial factor in favor of a particular material.
Modern and simple solution for sealing - a plinth for a bath
Modern and simple solution for sealing - a plinth for a bath

Whatever the source data, today you will be able to find a suitable option and place the joint between the bathtub and the wall so that it is not only functional, but also beautiful. After all, modern borders are not only able to solve the problem of moisture ingress into the gap, but also to support and sometimes even to decorate the interior.

Skirting for baths: Variety of materials

In order to make a choice in favor of a particular material are advised to become familiar with all existing options, look at the advantages and disadvantages of each. A brief look at everything that is presented in today's market of construction materials.

Plastic border - is especially popular due to efficiency and resistance to external factors
Plastic border - is especially popular due to efficiency and resistance to external factors

Plastic border for a bath

Excellent technical characteristics of plastic, its strength and resistance to the effects of various external factors - some of the main advantages of this material evidence in favor of this choice. At an affordable cost it boasts also a fairly simple installation, which greatly facilitate your work, if you plan to do anything with his hands. Plastic borders for baths are presented in a large variety of colors, so choose the option that will fit in your home decor, more than just that.

Fixing is performed by means of special adhesive or liquid nails. Also on sale you can find self-adhesive plastic moldings for the bath. In order to secure such a model is enough to remove the protective cover and set the item to the place where it should be.

Installation of plastic border for a bath can be carried out independently
Installation of plastic border for a bath can be carried out independently

There are two ways to install - a plinth under tiles or on top of it. In the first case, the work for installing curb performed before proceeding to laying the tiles, and in the second case, after the completion of the aforementioned operations.

Ceramic border for a bath

The main competitor of plastic moldings - ceramic borders. Featuring a longer service life, and high strength, they gained a leading position on the market today. Especially well with this option with walls, which are used for finishing tiles.

When choosing a border is important to consider the color and material of the walls and adjoining bath
When choosing a border is important to consider the color and material of the walls and adjoining bath

Once used for this purpose the same tile as the walls, hand slicing pieces of the desired size and attaching them in the same way as the tile. Today, however, manufacturers are offering eliminates the need for measurement and adjustment of parts, and purchase the finished ceramic skirting bath. Moreover, to facilitate the installation process, sell special corner elements, which allow not fit to engage in, and immediately fix the finished area.

Another reason to buy a ceramic skirting for baths - long service life, which can be measured by whole decades. However, it should be borne in mind that the period of service depends on the quality and styling, despite the apparent ease of this process requires some experience and skills. Therefore, if you have never had to deal with such works, it is better to entrust it to a professional to be sure of the results.

Ceramic curbs high durability and long service life
Ceramic curbs high durability and long service life

Advantages and disadvantages of ceramic border

Advantages and disadvantages of ceramic plinth:

  • ceramic borders characterized by high integrity. They almost never miss the water;
  • if the distance between the wall and the bathroom is large enough and installation of plastic profile is impossible, ceramic skirting easily solve this problem. The gap is recommended to fill a suitable sized pieces of brick, and then closed with a ceramic border;
  • certainly, ceramic border will last you much longer than any plastic panel.
Ceramic bordyurimeet variety of colors and textures, and fit perfectly into the interior of the bathroom
Ceramic bordyurimeet variety of colors and textures, and fit perfectly into the interior of the bathroom
  • the appearance of the ceramic frieze is preserved in its original form, which is not the plastic panels, which are often quite turbid and covered with a characteristic yellow coating that can easily spoil the look bathroom;
  • the chemical composition of the material defines a high resistance to a variety of external factors: temperature changes, deformation at break and so on;
  • range of ceramic borders bath surely impress even the most demanding users. On sale you can find both white and color models, smooth and textured, concave and convex.
Skirting boards made of natural stone most expensive in price and not in each bathroom will look appropriate
Skirting boards made of natural stone most expensive in price and not in each bathroom will look appropriate

The only significant disadvantage of the ceramic skirting - low resistance to shock. Dropping on tile heavy object, you may damage it, leading to the appearance of cracks where water can enter.

Self-adhesive tape curb bath

This is perhaps one of the most simple and convenient options for protecting the joints between the bath and the wall. are sold borders of the beltMade of polyethylene. They are designed to seal the gap. Self-adhesive baseboard bath is chosen individually, depending on the desired size. The ability to choose the suitable width and height of the curb ensures reliable protection from moisture.

Self-adhesive tape curb bath
Self-adhesive tape curb bath

As for the self-adhesive mounting plinth for a bath, the technology even easier than in the case of installation of the plastic border. Thanks to the adhesive, the tape is simply fixed in the right place, then further sealed using silicone sealant.

Acrylic plinth bath

About to buy acrylic plinth bath, thinks not everyone. First of all because it costs more than analog, made of silicone. However, when it comes to choosing a plinth for acrylic baths, it is certainly ideal.

The main feature of this material - poor tolerance to thermal expansion, which is why its use is not always possible. For installation using liquid adhesive with a silicone base, since even after drying it retains some plasticity.

Acrylic plinth is ideal for protection against the ingress of moisture under the acrylic bathtub
Acrylic plinth is ideal for protection against the ingress of moisture under the acrylic bathtub

Curbs bathroom made of natural stone

Skirting, made of natural stone - quite a serious and expensive variant, which nonetheless is unique looks in any sophisticated interior. Although this exquisite border can not be considered affordable for everyone, its popularity is hard to underestimate.

The selection process should pay attention to compliance with this skirting the environment, choosing those models that fit in color and can fit into the existing stylistic direction. Of course, the use of marble plinth preferably when the bath itself is made of the same material. Although cost is a design there will be many, we must pay tribute, not only its aesthetic component, but also excellent technical qualities: long life and high strength material.

Ceramic border provides reliable and high-quality protection that prevents the flow of water through the joints
Ceramic border provides reliable and high-quality protection that prevents the flow of water through the joints

Installation of baseboards on the bath with his hands

The two most popular options for the design bath joint - plastic or ceramic moldings. And if you are installing plastic curbs and various adhesive tape is relatively straightforward, the installation of the ceramic skirting usually causes a lot of questions. Next, consider the installation of both models.

Plastic moldings on the bath: how to glue yourself

If you decide to buy plastic moldings for the bath, it is a great way to save money. After all, no matter which of the two options you choose (or self-adhesive PVC roll-bar), buy plastic border for a bath you can at an affordable price, and the installation of their own conduct.

Plinth and connecting fittings fit together with great precision, forming a high-quality and beautiful butt
Plinth and connecting fittings fit together with great precision, forming a high-quality and beautiful butt

It should be understood that the self-adhesive border is just to seal the joint, while, as the plastic panel - just a decorative element, which actually covers sealant. And to stick such panels efficiently, you need to follow the following procedure:

  • place around the gap must be thoroughly cleaned from dust and dirt, and then wipe dry. After it is necessary to fill the sealant and allowed to dry completely;
  • using construction tape measure, measure the length of the bath sides that are adjacent to the wall. Knowing the required length, you can adjust an existing profile. In order to ensure an aesthetic appearance, the edges are cut at an angle of 45 degrees;
For aesthetic appearance, the edges are cut at an angle of 45 degrees
For aesthetic appearance, the edges are cut at an angle of 45 degrees
  • to spend bonding process as carefully as possible, use masking tape, paste it on the edge of the bathtub. This will protect it from getting excess glue;
  • bonding procedure itself is conducted as follows: the panel is applied to the wall and pressed tightly. Then, bending back the top edge of a small corner, there is inserted into the gun and squeezed out the sealant. When the joint is completely filled with a conventional trowel can be still completely level. The same is done with the lower part of the border. After complete drying of the sealant tape can be removed.

Useful advice! The great advantage if in the process you have a helper to help hold and push the panel. So your chances to make a quality installation is significantly increased.

On the reverse side of a border is applied to an adhesive composition and a tile placed in the position he place
On the reverse side of a border is applied to an adhesive composition and a tile placed in the position he place

In any case, it should be understood that the plastic panels are not designed for long-term use. Most likely you will have to change them with high periodicity. Therefore, consider in advance whether it would be better to give preference to ceramic curb.

Installing ceramic curb their own hands

Qualitatively install ceramic border is not so simple. But if you have at least a minimum experience of repair and you are ready to give this issue a sufficient amount of time, then the task is feasible. Moreover, there are two different installation method. A detailed look at each option.

Related article:

Ceramic tiles for the bathroom: design, photo samples

Types of ceramic tiles used for bathroom design. Photos of finished objects in a variety of styles.

Before you get started, make sure that you have available all the necessary tools and materials. The list includes:

  • Silicone sealant for use in conditions of high humidity (special additives to prevent the development of fungi and molds in the field of application);
As part silicone sealant for the plinth contains special additives to prevent the development of fungi and molds
As part silicone sealant contains special additives to prevent the development of fungi and molds
  • ceramic border, the number of which is counted in advance (do not forget about the necessary reserve);
  • adhesive for tiles;
  • gun for extruding adhesive;
  • putty knife;
  • pliers;
  • sanding block.

Useful advice! The calculation of the required amount of sealant is made individually. Roughly, in a standard-sized bath consumes about 100-150 ml, depending on the thickness of the applied layer.

Plastic skirting can be easily installed with my own hands, adhering to certain rules
Plastic skirting can be easily installed with my own hands, adhering to certain rules

Another important preparatory stage of work - Calculating the number of tiles. This can be done in the following way:

  1. Perform measurements of the sides of the bath, which are located near the wall and require sealing.
  2. The resulting figure divide the length of the curb element.
  3. Round the result in a big way.
  4. Make a small margin, gaining a few extra elements in the event of damage to some of the pieces of the plinth.
Border closes and germeteziruet joint between the wall and the bathtub when the wall already Tiled
Border closes and germeteziruet joint between the wall and the bathroom wall when already faced with tiles

How to install ceramic skirting Bath Tile

Installation curb this way traditionally begins with harvesting and cleaning the surface of dust and dirt. Make sure that in the places where the elements will come into contact, it was dry. Be sure to degrease the surface. Then, using the sealant close the gap by filling it uniformly. In order to still get a smooth, use a spatula or do it by hand, pre-moisten it with water.

The main purpose of this procedure - to eliminate any cracks and gaps where water can enter. Therefore, carefully and thoroughly apply the sealant and re-check the result.

Curb installation under tile, you need to start from the corner and move to the edge of the bath
Curb installation under tiles need to start from the corner and move to the edge of the bath

After drying sealant you can start laying the curb. If you have a need to make adjustment elements, for this purpose it is recommended to use a grinder with a diamond blade or pliers. In the second case, the pre-draw the line on which you wish to crop, and then "bite off" small pieces of tile. For the aesthetic appearance of the edge must be sanded using a sanding block.

Then, on the reverse side of the adhesive composition is applied to a border tile and placed in the position it place. In this case, it is recommended to start from the corner, moving to the edge. So it will be easier to perform the adjustment of the extreme element.

Elements of the curb must be placed as close as possible to each other, so as not to leave a gap
Elements of the curb must be placed as close as possible to each other, so as not to leave a gap

Useful advice!With a damp cloth Clean up excess glue immediately, without giving him a chance to dry. Otherwise, in the future you will have to spend a lot of effort.

Place the elements necessary to the curb as close to each other to practically leave no gaps. After the glue is completely dry, which takes at least one day, using the same trowel, which was used in the process of laying tile, you need to seal the seams. If the wall has large irregularities, and you could not align elements curb ideally, use a sealant to fill gaps.

Install ceramic border tile on top of the best
Install ceramic frieze best top tiles

How to install ceramic tile on the border

Another, more simple way - Installation of the curb on the tiles. In this case, you must start traditionally, with a clean and degrease the surface with which to work with. The easiest way to carry out attachment using the "liquid nails", but the suit and any other water-resistant adhesive. After it is applied to the wall is necessary to wait a certain time, which is recommended by the manufacturer composition.

As with the installation of curbs under the tile, you should start from the corner and move to the edge of the bath. And in order to ensure the best possible connection between the tiles and the curb, it must press firmly. Furthermore, exactly how much will be pressed in the process of drying the curb, and determines the degree of its further tightness.

Reliable and solid ceramic borders fit perfectly into the interior of a bathroom
Reliable and solid ceramic borders fit perfectly into the interior of a bathroom

Any excess glue must be eliminated immediately, and to position the border as straight as possible, you can use the building level. When completely dry can only treat the grout joints.

Before you buy a plinth for a bath, made of a particular material, it is necessary once again to weigh all the arguments in favor of each. Attempts to save does not always lead to positive results, although often too costly options do not justify embezzlement. In any case, you now have an idea about all the options available, and you will surely be able to make a choice that will not disappoint you.

instagram viewer