The sink in the bathroom: how to combine comfort and interior

click fraud protection

SHARE
in social networks

FacebookTwitterOkGoogle+PinterestVk

Avoiding typical, standard - a progressive feature of modernity. The quest for originality has come full-scale and in the world of plumbing. Why not do water treatments in a pleasant atmosphere? The question is rhetorical. But such an environment must be created. One of the important elements of the interior - sink in the bathroom. On what models exist, differ and are characterized - in Article submissions.

The sink in the bathroom: how to combine comfort and interesting interior

Shells for the bathroom can be recessed, surface and suspended

Content

  • 1 Washbasins for the bathroom: a variety of models, materials for manufacturing
  • 2 Possible ways to install sinks in the bathroom
    • 2.1 Universal version: Hanging sink for bathroom
    • 2.2 Accommodation options mortise sinks in countertops in the bathroom
    • 2.3 Compact and originality: Overhead sinks for bathrooms
    • 2.4 Floor sinks in the bathroom: the main advantages
    • 2.5 Corner sink in the bathroom: what to consider when setting
  • 3 The dimensions of the shells: the technical and aesthetic aspects
    • 3.1 shell height in the bathroom: the standard and possible variations
    • 3.2 The optimum depth of the sink for the bathroom
    • 3.3 The length and width in the bathroom sinks and performance
    • 3.4 Rational use of space: the sink with lateral drain
  • 4 The sink in the bathroom: the rating of the best models

Washbasins for the bathroom: a variety of models, materials for manufacturing

The main purpose of the bathroom - sanitary. One of hygiene, ie washing, requires a special shell. Some, because of the small size of the room, give up this type of plumbing and faucets are above the bath. It should be noted that this decision is erroneous, and the arguments proving it can cause quite a lot.

Sinks in a bathroom made of porcelain, earthenware, ceramics, glass, metal, stone

Sinks in a bathroom made of porcelain, earthenware, ceramics, glass, metal, stone

Firstly, the use of inconvenience. Spout mixer over the bath is low, it is necessary to bend, the water splashed out of his hands.

Secondly, in the washing water drops with detergents and toothpaste fly over a fairly large area, which complicates the cleaning surface.

Third, such an arrangement is difficult to wash, to be exact, it is practically impossible to hang a mirror in position.

A variety of existing models can satisfy any demand. It can be purchased at the bathroom sink to countertop embedded, overhead, overhead, large or small.

On the size of the shell is largely influenced by the material from which it is made

On the size of the shell is largely influenced by the material from which it is made

The main materials of which make modern sinks are:

  • china;
  • faience;
  • ceramics;
  • glass;
  • metal;
  • a rock;
  • polymers.

The material used for manufacturing affects the dimensions greatly. Shell of porcelain and faience have thick walls, they are more bulky. Glass-metal compact. Stone shell, though made of a thick layer of material, generally have an original shape that allows plumbing and place this in small bathrooms.

Possible ways to install sinks in the bathroom

Installation methods, there are a few shells. Before answering the question, how to install the sink in the bathroom, it is necessary to harmonize the wishes and the available technical conditions. Should pay attention to the following:

The main methods of installing sinks - it is hanging, installation of the floor, cut into the countertop or tabletop installation on

The main methods of installing sinks - it is hanging, installation of the floor, cut into the countertop or tabletop installation on

  • not whether there will be obstacles and difficulties in the process of summing up the communication;
  • whether to allow the wall material to perform the necessary fixing;
  • convenient to be an approach to the sink.

The main methods of installing sinks:

  1. Hanging. Such sinks are called console. They are mounted on a frame or bracket.
  2. Installation on the floor. This is called "tulip", ie there is a supporting leg design.
  3. Plunge into the countertop.
  4. Installation on countertop.

We should also highlight the sinks, which are attached to the corners of the room. Such products also have the corresponding form. It can be both floor and suspension models. If the design has a countertop, it is one and the corner is, the shell may be round, oval or square.

Before choosing a sink for the bathroom you need to pay attention to the material of the walls, whether it will perform the necessary mounting

Before choosing a sink for the bathroom you need to pay attention to the material of the walls, whether it will perform the necessary mounting

Sinks in the bathroom over the tub also deserve special attention. Such products are usually suspended, their shape follows the contours of the bath in the area where the sink hung. With this method of installation is important to properly equip sink: maximize hide in the wall or buy a neat metal polusifon. Last is acceptable when using plumbing for washing.

Useful advice! If in the house (or apartment) for more than 5 tenants should install two sinks. Otherwise, in the "rush hour" problems can not be avoided.

Universal version: Hanging sink for bathroom

Suspended sinks have long been virtually the only option. Benefits from a lot of data models:

  • just made;
  • easy to set;
  • inexpensive;
  • compact;
  • appropriate in areas of any size.
Suspended shells have many advantages, they are easy to install, have a small footprint and affordable price

Suspended shells have many advantages, they are easy to install, have a small footprint and affordable price

Modern same hinged shell is largely different from the classic Soviet washbasins. First of all, we change the form, but rather, add more of their diversity. Manufacturers produce not only rectangles with rounded corners, but also ovals, squares, rectangles asymmetric, "drops" and so on. D.

Spared the current models and bulky, unsightly open communication elements. Today it is a neat pipe bend with a nice glossy finish. He not only does not spoil the appearance, but also plays the role of design construction additions.

Set such shells on the brackets. Usually mounted models have bumpers that are to be placed on these various hygiene products, as well as enable to hide the attachment. It is also possible hanging on a metal frame. In fact, this modernized brackets. The advantage of this form of fastening is the presence in the zone of the horizontal pipe underneath the sink, which can hanging towel: in the expanded form is well dries, the water droplets protects the basic structure washbasin.

Hanging sink for bathroom hung on brackets, or mounted on a metal frame

Hanging sink for bathroom hung on brackets, or mounted on a metal frame

Particularly relevant suspension sinks in bathrooms of small dimensions. Design compact, concise, do not clutter up the space either visually or in fact.

Accommodation options mortise sinks in countertops in the bathroom

Countertops in the bathroom equips for various reasons. Some prefer the presence of a significant amount of horizontal space to accommodate a variety of items. Someone is trying to organize a separate zone, setting the floor under the table top all items: cabinets, machine, the shelf - leaving free the remaining space. For many countertop - it's an interesting element of the interior.

In these cases, a sink, built-in countertop. And there is no limit to the creative imagination and fantasy: you can buy washstand original form and place in the center or offset to one side.

Sink built into the countertop is a great element of the interior

Sink built into the countertop is a great element of the interior

two kinds of installation, you can select embedded shells:

  1. Partial waterboarding bowl. The hole cut immersed bulk of Washbasin ledges also lie on the countertop. Uncomplicated mounting process, mounting a solid is obtained; tight contact with the edge of the sink countertop mounted sealant prevents the penetration of moisture.
  2. Integration. The cup is placed under the worktop (integrates), it does not protrude over the horizontal surface.

The second embodiment can be referred to more aesthetically pleasing and original method. But the installation is much more difficult, more expensive and troublesome. And the cost of such a way built-in sink bath significantly higher.

Embedded shell are two types of installation: with partial waterboarding bowl and placing under the tabletop

Embedded shell are two types of installation: with partial waterboarding bowl and placing under the tabletop

Useful advice! For the normal functioning of the sink, built-in countertop, it is very important to choose the material of the latter. Wood-based panels is better not to use, so how to ensure long-term watertight inner hole cut is extremely difficult to sink.

Compact and originality: Overhead sinks for bathrooms

The entire range of materials used for the manufacture of shells is shown in overhead models. It should be noted that these options plumbing market appeared relatively recently. The main advantage of placing the sink on the countertop - interesting interior. Washbasins with this type of installation are different oversized designs are therefore useful in rooms of all sizes. Compactness largely ensured the absence of side ledges and wall thickness. Even porcelain and faience of this type is much thinner than similar suspension and floor versions.

Among the many overhead washbasins glass models, both colored or opaque and transparent. Most often, they are mounted on a glass countertop. This combination makes it easy to construct an interesting, often turning it into a central interior element.

Installation bill shell is a very simple process with which to handle even an inexperienced technician

Installation bill shell is a very simple process with which to handle even an inexperienced technician

It should also be noted that the installation of the invoice sink in the bathroom is a simple process, which can be handled without special knowledge and skills. The main weight of the thicket of lies on the table.

Related article:

Sink with cupboard in the bathroom: comfortable and functional element of the room

Variety of designs. Features and advantages. Adjustment of washstands with pedestal. Popular models.

Constructions can be both easy, with a decorative design and concise, but quite massive. The latter characteristics inherent rectangular and square shells of stone, porcelain or earthenware.

Overhead sinks with worktops can be installed along a wall or in a corner. Possibly insular position, if there is no communication difficulties with the application.






Floor sinks in the bathroom: the main advantages

To include outdoor washbasins models that have lower vertical support, the so-called "foot". It performs two functions:

  • It supports the thicket;
  • hide communication elements.

For resemblance to a flower (the opened petals form a bowl) this type of basins called "tulip."

Until recently, all the "tulips" looked about the same. They were rectangular with rounded corners or an oval projecting portion and the leg-cup pedestal flared up or down, or straight.

Floor sinks are those models that have a vertical support

Floor sinks are those models that have a vertical support

Today the range is much more diverse. Products began to carry out not only of the above materials, but also of stone, glass. Yes, and the appearance of faucets for the sink in the bathroom of various modifications to make it possible to design these basins is much more interesting.

Among the proposed modern manufacturers of products have floor shell of red, black, blue and other colors. Not decreases and the demand on the white shells. The advantage of this color is that it is easy to pick up another sanitary ware: toilet, bidet, bath.

Models made of glass can have a transparent bowl and mat rectangular foot. Such an option is organic to a loft style, high-tech minimalism. For classical bathrooms suitable variants of natural or artificial stone. It should be noted that the mass of natural stone products for sale are not presented, but look for an exclusive model is realistic.

Useful advice! The design of the shell "tulip" more compact. Sometimes it is not necessary to chase the new-fangled models and choose among the classic products with the original designer features.

Reliance floor shell performs a supporting function and hides the communication elements

Reliance floor shell performs a supporting function and hides the communication elements

Corner sink in the bathroom: what to consider when setting

Looking through the internet catalogs of products to sell the site, you will notice that among this type of sanitary ware like sinks, corner model is 5-7%. And it is no coincidence. Despite the visual appeal, to the selection of this option should be approached thoughtfully and responsibly. Busy angles do not always contribute to the liberation of the visual space.

It is very important to choose the right angle to the bathroom sink. And there will be no harm to take advantage of the following tips:

  1. If the room is critically low, it is worth to buy a hanging model of small size, and leave a free space under the sink. Lockers and shelves above the sink to place more appropriate.
  2. When mounting a corner model in rooms with complex layouts, such as in a broad niche, it is appropriate to establish an embedded model with pedestal, which has a rounded facade.
  3. Sinks with rectangular tables arranged on both sides of the angle, suitable for areas with a sufficient amount of free space.
  4. An excellent option for rectangular corner sink bathroom with a large difference between the sides can be asymmetric model identical to the room shape, where the cup is elongated along one wall angle.
In a small room is to choose a hanging corner sink

In a small room is to choose a hanging corner sink

Corner sink in the bathroom can be installed with all existing methods and have a variety of forms. When you place it is also important to ensure easy access and comfortable body position. A sense of limited space significantly reduces the level of comfort.

The dimensions of the shells: the technical and aesthetic aspects

A very important characteristic of the basin of any shape and type of installation is the size. This indicator has both technical and aesthetic side. If a small bathroom with a large sink, it not only takes a lot of space, but also spoil the interior of their bulkiness. On the contrary, the original miniature model of the "lost" in the free space of a large room.

Select size sink proportional to size of the room - an important prerequisite for creating an interesting interior and provide a sense of comfort. To a large extent it depends on the size and ergonomics of the whole area. The need to reach, greatly tilted, constantly monitor the situation complicates hand washing procedure, straining the psyche and reduces the positive emotional state.






Unfortunately, the growing tendency to improve the design of shells to some extent led to the fact that some manufacturers have moved away from the dimensional standards for product manufacturing. And it can not affect the usability. This is particularly reflected in the exclusive models.

Important! When you select the original shell shape should definitely analyze and evaluate the process of its use. Multilevel edges may give the product originality, but to use this shell without significant splashing water outside it is almost impossible.

Based on the size of the sink in the bathroom can be divided into the following types:

  • full length of the product;
  • mini-sink, compact;
  • advanced (usually due to additional horizontal surfaces);
  • exclusive options.
Choosing a sink of the original form is necessary to evaluate and analyze the process of its use

Choosing a sink of the original form is necessary to evaluate and analyze the process of its use

Before purchasing a sink must always perform measurements of the room where you plan to install.

shell height in the bathroom: the standard and possible variations

One of the indicators of size shell - height. Taken into account the distance from the floor to the top of the outer edge (some models part of the shell in the area of ​​the mixer unit may be raised). The optimum size of the sink for the bathroom, in particular the height defined in the document. According SNP 3.05.01-85 it should be 80-85 cm, deviations permitted by 2 cm.

Modern manufacturers easily flout established (in fairness it should be noted that for a long time) standards based on the third-party opinion and their own research, and increase the height of the products to 92 cm, and sometimes more.






Suspended and mortise models that do not have thumbs, can be installed at the desired height, taking into account the physical characteristics and user preferences. Usually summarized the growth of all adult members shall be averaged. For children you can purchase stage, they pretty much offered in plumbing stores.

Harder with floor models and bench with Cabinet. Such sinks for the bathroom size is fixed and usually not subject to adjustment. It is theoretically possible to reduce the pace, but it will not do without the use of special equipment and loss aesthetics - can only shorten the lower part, and thus violated the proportions distorted design idea. Some tables with tabletops have adjustable legs that allow you to increase the maximum construction height is 4 cm.

Therefore, choosing the shell with a fixed height, it is necessary to determine the required resolution.

According to the SNIP 3.05.01-85 shells from the floor must be placed at a height of 80-85 cm

According to the SNIP 3.05.01-85 shells from the floor must be placed at a height of 80-85 cm

The optimum depth of the sink for the bathroom

With regard to the shell depth, it is determined by the distance from the top edge to the bottom of the bowl interior point, i.e. drain. Certain standard for a given value does not exist. Many are guided by taste preferences, choosing the small or deep bowl. For example, it is better to acquire the bathroom sink built having a significant component, - at least 18 cm. Otherwise it lost the effect of such external sink arrangement.

If the depth is less than 15 cm, wash your hands under intense water jet without splashing outside shell is unlikely. When using a rotary spout also may cause splashing when flow is not directed into the drain zone.

When labeling products some manufacturers do not indicate the depth at a distance from the top point to the extreme lower point of the outer cup. This value is important when connecting the communications taps.






For overhead sinks in the bathroom, in addition to the performance characteristics, the depth is as important as the interior component. Such designs are often accentual, so properly chosen size will enhance or diminish the aesthetic significance of the shell to the overall perception of design.

Useful advice! If necessary, make a choice between several products should take into account that a deep bowl in the use of more convenient.

The length and width in the bathroom sinks and performance

Before you try to understand the values ​​of the length and width of the shell, it is necessary to distinguish between indicators directly bowl and products in general (with the ledges and other horizontal surfaces constituting construction).

For comfortable use sink, its internal central area shall be at least 50h35 cm

For comfortable use sink, its internal central area shall be at least 50h35 cm

In the integrated built-in bathroom sinks, these parameters are the same. Most often, they are almost identical and overhead structures round and oval. The other models of the same differences can be significant.

Over the length should be the distance between the lateral extremes width determined segment connecting the center points of the front and rear edges of the shells.

What a shell is more convenient - wide or long? The unequivocal answer to this question does not exist. These parameters are often selected in accordance with the design. For comfortable use requires inner central zone at least 50h35 cm. There shell is much smaller dimensions, but their use is complicated by several precisely because of the size.






Flush the sink in the countertop for the bathroom, which has a side, may outwardly appear quite large, but the functionality it should be evaluated precisely direct the length and breadth of the bowl.

Suffice it difficult to determine the operational characteristics of the angular models sinks, depending on the length and width. That is why these products required to be measured at the aggregate of all the properties.

Rational use of space: the sink with lateral drain

Sometimes the conditions in the bathroom are those that take into account the advice and recommendations on the selection and comfortable operation of shells is almost impossible. There is only one option - installation on the washing machine. All is not easy, since it is necessary to purchase and machine characteristics, and sink. Built and suspension options are not appropriate - needed bill, but a special design.

The depth of the sink with a side discharge does not exceed 15 cm

The depth of the sink with a side discharge does not exceed 15 cm

First of all it is necessary to choose the machine-Machine respective sizes. It is required that the height does not exceed 70 cm, and the depth should be 15 cm less than the width of the shell. The latter condition is necessary for the organization of the drain. The length of the same is necessary, it will mount an aesthetic design that looks seemingly monolithic.

Now for the sink. Most often it is the flat model, the depth of which does not exceed 15 cm. In addition to size, the necessary condition - the presence of a lateral drain. This feature allows you to place a concrete shell of the machine.

There are two more nuance, they are as follows: if the front side on one mount vertical level, the design is more attractive, but come close to the sink is not succeed; when you install the sink in the bathroom with an overhang over the machine even at 5-7 cm will be much more comfortable, but will appear bulky. What problem is the lesser evil - a subjective opinion.

Useful advice! When purchasing a sink with a side discharge, you must pay attention to the presence of bias. Its absence will contribute to accumulation of water and the formation of plaque.

The presence of a lateral drain allows you to place the sink on the machine with little or no gap

The presence of a lateral drain allows you to place the sink on the machine with little or no gap

The sink in the bathroom: the rating of the best models

Choosing a sink in the bathroom, everyone wants to know what products are in demand. Such information provides an expanded view of the plumbing, it contributes to a more objective assessment. Below is a list of the best models.

5th place. Sersanit COMO 40. Compact original ceramic shell. Has a rectangular shape, can take an angular position. Accommodation mixer lateral present overfill protection. The manufacturer is positioning the product as a suspension in the bathroom sink. But it is quite possible to mount and locks.

4. Sersanit CITY 60. Model made of faience, has a warm white color. Central plant mixer control overflow. The product is flat, sleek design, suitable for installation in countertops from the tables.

Metal built-in countertop sink Reginox Atlantis has a circular shape and matte surface

Metal built-in countertop sink Reginox Atlantis has a circular shape and matte surface

3. Aquaton LAZIO 95. Artificial marble. Sanitary is highly durable. Bowl supplemented broad, flat flanges, which is convenient in use. Washbasin can either be hung or crash.

2. MILAN Aquaton 80. The product distinguishes original design, characterized by smooth lines, lateral arrangement of the mixer and holes for overflow protection. The model of the artificial marble. More suitable for installation in countertops.

1. Reginox Atlantis. Metal sink in the bathroom, built-in countertop. Material - stainless steel. Circular shape, matt surface, which gives the product a presentable and partially hides traces of dirt and water. The product is a solid, the metal thickness - 1.2 mm.

A variety of options gives a lot of plumbing installation methods: integration with furniture, overlapping with appliances, placement on the floor, fixing the walls. Among all tempting variety of design solutions need to choose your option, which will arrange a comfortable operation and an attractive appearance.

instagram viewer