Wiring Diagram 220V LED strip to the network: installation

Color gamut LED strips

Using LED strip, you can implement any ideas creators of home comfort. They are used for contour illumination of ceilings, floors, stairs, as well as pieces of furniture and decorative items: paintings, murals, aquariums. Applying such coverage to remote areas, it is possible to beat the shortcomings and emphasize the dignity of the interior.

Related article:

LED strip for illuminating ceilings. Basic accommodation options.Basic rules and intricacies of selection of such illumination options. Examples LED strip placement on the ceiling. Especially its installation.

LED Strip Light to illuminate the ceiling

Thanks to its compact size, for installation of LED strip on the ceiling does not require large devices depressions: for its placement usually lasts a few centimeters. Depending on the preferences, can be used monochrome ribbon emitting luminescence of colors or colored flat cables, which can be obtained by adjusting virtually any shades. Photos backlight LED ceiling ribbon under the skirting illustrates methods for isolation rooms circuits.

Used to illuminate the tape, depending on the size of the diodes are divided into two types: SMD SMD 3528 and 5050. SMD 5050 tapes have strong luminescence diodes, each of which is operable to emit three colors (RGB-tape). By using RGB LED strip with remote control and controller and power supply unit are set not only the emission colors, but also the time during which they will be altered.

LED strip for tensile structures creates a floating ceiling effect

There is also a classification of tapes according to the number of diodes placed on the flexible strip 1 meter. Their number may be 30, 60 and 120. The higher the density of the diodes, the brighter glow, and therefore, power consumption and size of LED strip. To illuminate the ceiling is recommended to use a tape, the fluorescence intensity of which is negligible: the backlight will not be the main source of light, but only gently to shape ceiling area.

Note!When choosing power LED strip on the meter, It should be noted that the greater brightness, the more powerful the need Power Supply and the more expensive the cost purchase.

Before installing the LED strip on the ceiling (if you can not hide it behind the drywall or tension design), mounted a special profile in which it is located. Profiles for LED strips are fixed simply and contribute to a better cooling of the tape. Buy Profiles for LED strip can be in retail outlets specializing in the sale of lighting.

The original ceiling design with backlit LED strips

LED strips in the interior of the apartment: photo ideas contour lighting

Most often, when the interiors LED strip is used as local lighting, supplementing the main light source. However, they can be used to illuminate a small specific area, for example, headboard or kitchen apron. Very popular lighting option kitchen countertop, as evidenced by numerous photo LED strip in the kitchen.

Useful advice!mounting the kitchen lighting LED ribbon, Position it so that the light emitted does not "cut" the eye.

Framing stages tape is not only an excellent design solution, but also serves as a security move up the stairs. Such light can be used in standby mode. Making it less intense, you can leave the backlight for orientation during the night. If arrange LED Strip area, where the TV set, then, for comfortable viewing will not need additional light sources.

LED stair lighting

With LED give volume glass ribbon racks and shelves, illuminating them from the end. In the interior, where natural light is not enough to highlight paintings also use LED backlighting. This method will give a flavor of the product and the original, and the absence of heating to not damage the web. Look spectacular illuminated strip curtains or drapes.

Loop flexibility allows to realize highlighting niches complex shapes of all sizes, shapes of furniture, shelves, mirrors and other interior elements. Making color light transparent glass surface, it is possible to create a lively sensation or, alternatively, an atmosphere of relaxation and privacy. Very convenient is the use of tape in cabinets and closets.

The use of LED-belt for additional illumination in the kitchen

Self-adhesive LED strip 220V

The main difference between 220V LED strip of similar products is that it operates at a voltage of 220V without power supply. For the network it is connected by special power cables, so you can easily make a connection LED strip with your hands. Furthermore, it is possible to connect up to 100 m flexible belt LED-220V, applying a power supply cable.

The product discharged from the various classes of protection, including dirt, dust, moisture, and mechanical damage nature, adverse weather conditions. Self-adhesive tape carried on a thin flexible base thickness of 2 mm, a width of 2 cm and delivered in bobbins 50 and 100 m. The tape can be cut into pieces that are multiples of one meter without prejudice to its functionality.

Manufacturers produce 220 models of flexible backlight LED type: SMD 3014, SMD 3528, SMD 5050. Types of LEDs affect the brightness and power consumption of the tape. Various luminous color and color temperature models. For mounting there are special clips that provide quick and easy attachment.

LED strip on the basis of self-adhesive - a versatile light source

For ease of installation, on the back side of the tape is applied an adhesive layer (two-sided tape), a protected film. To fix the LED strip at the right place, it is necessary to remove the protective layer and make its adhesive face to the surface. To prevent peeling, too long stretches (over 5 m) recommended cut into individual pieces.

Note!If the surface on which you plan to install the LED strip is conductive, it is necessary to isolate.

Price per square meter LED strip

Manufacturers produce LED strip, which differ in size and density of LEDs, the degree of protection, the color of light and other characteristics. You can buy products from online stores, sites of manufacturing companies, as well as in specialized shops. Supplied in rolls of tape. Depending on the desired length, the flexible board can be cut into desired lengths.

A standard set of LED products

The tape radiated uniform illumination, it is worth to buy profiles for LED strip with diffuser. In commercially available profiles of aluminum, plastic, with circular and rectangular cross section, they may be inset or patch. For flush mounting can be purchased angular profiles for LED strip, which will ensure its protection against mechanical and environmental influences.

Will be on sale LED strip 220 (Rope) are designed for direct connection to an ordinary wall socket. In view of this, it is not necessary to acquire the power supply, which makes the purchase more profitable. Having bought an LED strip 220 for interior decoration can be significant savings, given that it consumes much less energy than incandescent bulbs, providing the same coverage.

Estimated price per square meter LED strip 220 are presented in the table:

LED strips have a different supply voltage: 12V, 24V and 220V. Therefore besides tapes themselves, are offered for sale voltage converters (power supplies), controllers for controlling multi-colored ribbons, cords, connectors, as well as presets components. In addition, product catalogs and presents profiles of ducts for LED strip, which can be issued to purchase the appropriate order.

Best price adhesive tape 12B SMD LED 3528, a one meter which LEDs 60 are arranged, ranges from 73 rubles. per meter, such as a tape with 120 diodes can be purchased for 139 rubles. per meter length. The cost of self-adhesive waterproof LED ribbon 12V with 60 LEDs ranges from 110 rubles. per meter.

Useful advice! Should not buy cheap products: it is likely that over time, low-quality LED strip violated the color balance or even burn out the diodes.

LED strips are widely used for decorative lighting

Installation of LED strip: the price for the work

If you are of fundamental importance to the correct location, connectivity and service life of LED strips, it is necessary to seek help from professionals. Specialists will not only quality installation with the use of high-precision equipment, but also advise concerning the light level of illumination uniformity and selection constructs precise location installation.

Specialized organizations offer to the use of modern lighting equipment, chosen as a result of studying the properties and performance in different conditions. All connections are made quality cable soldering method, followed by isolation. Connectors for quick installation when the connection is not used.

Mounting LED strip in recessed profile

In addition, all necessary measurements are carried out to meet the requirements for illumination regulated SNIP. Works are carried out carefully, responsibly and in a minimum time. For all services provided a guarantee of up to 3 years. Price for installation of one meter monochrome LED strip is about 600 rubles to the cost of ribbon units and supplies. Setting RGB-tapes will cost approximately 1,400 rubles per meter.

Wiring diagram LED 220 tape to the network

The main reason for not be connected directly to LED tape 220V household power is high voltage. This connection will overheat and, as a result, the failure of the diodes. Tapes are designed for a supply voltage of 24V DC and 12V AC. The required voltage is printed on the tape itself over its entire length. For the value of the required power supply voltage converters used.

Wiring white LED tape dimmer and amplifier

How to connect the LED strips 12 Volt Network

Wiring diagrams for LED strips 12V and 24V as simple as possible and have an identical principle. Before connecting the LED strip to the 220, you should consider a few important points:

1. It should determine the total length of the line on which the tape will be located. Knowing this value, it will be cut into strips correctly.
2. Cut the tape must be in the exact locations marked by the manufacturer in the form of character with the image of scissors and cut the line. If we make the segment in any place, some diodes will be disconnected from each other and the light will not be as open circuit occurs.
3. It is necessary to take into account the polarity. If during connection the tape will not work, then the connection is wrong and it is necessary to rectify the situation.
4. Study guide to the product and familiarize yourself with the training video before installing the LED strip. Connecting lead in a specific order instructions.

When connected to the LED strip 12 volt power supply is used, whose main function is to reduce the mains voltage to 220V to 12V. Is connected via a two-wire cable: the power supply, he clamped terminals, and the ribbon is soldered to the ground pads. Compound transformer for LED strip 12 is made with the volt polarity: positive to positive, negative to negative.

The correct connection of 12 V LED strip to the network

Useful advice!In order to hide the power supply requires a certain space. With this in mind, choose the appropriate model of compact converters.

Connecting 220V LED tapes

Wiring tape to the LED network 220 without inverter comprises a diode bridge which serves as a rectifier and voltage. The peculiarity of the connection is that the LEDs are connected in a chain of 60 units in series or in pairs. Slitting the tape should be 50 or 100 cm. If during the operation fails one LED, then turn off the entire segment, which can be easily replaced.

When installing the LED strip with your hands, you must first control the current through the LEDs. If the measurement is greater than it is permissible, it is necessary to attach another piece of tape. This connection should be done very carefully, because the solder joints are bare and, if you accidentally touch them, you can get an electric shock. It is necessary to take measures to avoid touching the bare places.

Wiring diagram LED strip 220V

The LED strip 220V used just such a scheme. Factory products are already designed for connection to 220V. For the safety of such ribbons are placed in a transparent PVC tube: it eliminates the risk of contact with dangerous contacts and additional protection against moisture. Due to this, waterproof LED adhesive tape 220 can be used not only in rooms with high humidity, but also on the street.

How to make the illumination of the LED strip with your hands

To produce an independent installation of lighting, you need the following tools: a tape measure, a soldering iron, scissors, screws, wires. Before installing the LED strip, it is necessary to make the length of the measurement surface, in order to properly calculate the required amount of tape and supplies.

Fastening tape cut segments to one another can be produced in two ways: using solder or the belt ends by means of connecting connectors. If mounted segment highlighting long, it is recommended to use a parallel power supply circuit when the inverter is cable, which is connected to the tape. In this case, the luminescence intensity will be the same throughout the length of the backlight.

Schematic diagram of the RGB-LED connecting belt

Installation begins with securing their own hands profile for LED strip. For this purpose, at its base pre-drilled holes, through which the profile is fixed to the surface by means of screws. Then, to a side or bottom surface profile attached tape (the side on which the adhesive is applied basis). Wires and PSU hide in niches or interior elements and the LED (IR) is left visible.

There are various options for the manufacture of LED strip lamps with their own hands. The easiest way - to make a horizontal model to illuminate the countertops in the kitchen area where you would normally cut products. To produce aluminum corner need to make a hole and cut the appropriate length of the tape. If the backlight is not used for the profile, before installing LED strips in the kitchen, the surface is thoroughly degreased.

Knowing the principle of the LED strip, and using its flexibility, can be designed lamps of various shapes on any surface. They will strengthen the range of light and lighting will give a special effect design an entire room or individual elements. In addition, from the products created by the hands, always breathes warmth and comfort.