Bench made of wood with their hands for the infield

Wooden bench rest is central zone in the garden

Wooden bench rest is central zone in the garden

Note! Benches and wooden benches with their hands can be created on the basis of any species of wood. The only requirement for the material - the raw material should be well dried.

Do not take the work of the wood with external defects. The exceptions are some of the products, the design of which allows for the presence of cracks. Knots and burrs in any case have to be eliminated.

Wooden bench with backrest and armrests in the yard of a country house

wood bench with backrest and the armrests in the yard of a country house

Design and photo wooden benches and benches with their hands for the gazebo and garden

The choice of design determines the direction of all subsequent works. The design of future products will necessarily have an impact on the landscape, the style of the space where the garden furniture will be installed. Therefore, the choice of the project should be approached thoroughly. For inspiration, you can use a photo benches gazebo with your hands, which you can find on the Internet or in magazines on gardening and arrangement of garden.

Option benches built around the tree

Option benches built around the tree

The simplest design on two pillars suitable not only for the pavilions, but also for porches or terraces. The supporting part is assembled from planks. All elements of the legs must have the same size. Boards are placed in pairs, each following floor constructions must have a perpendicular arrangement with respect to the previous one. The seat can be manufactured from a bar. You pick the length, as long as with the design does not sag.

Benches made of wood are different beauty and high ecological

Benches made of wood are different beauty and high ecological

Useful advice! These types of structures can be made longer by adding additional supports. Because of this you will be able to establish a long bench along the outer wall of the house or in the gazebo.

A supporting portion made of wooden boards can be made more durable and reliable, replacing it with hollow building block. In this case, the seat bars will be fixed in the support holes. Do not forget to round off the edge on the wooden elements to make it easier to sit.

Wooden bench is made in the same style as the rest of the garden furniture

Wooden bench is made in the same style as the rest garden furniture

Benches and benches made of logs with their own hands: photo, design solutions

Buying timber is more expensive than the use of available tools. Creation of a log bench with their hands - the most amazing way to organize a cozy seating area in the summer cottage. For this you can use a long trunk of a fallen tree, which takes place on your premises, if the wood is not too deteriorated or damaged by insects.

The process of producing logs of garden benches

The process of producing logs of garden benches

To make the bench, you will need to cut the tree 2 pieces of equal length. As a result, you get 2 thick stump of the same height. They will be used as supports. Cut thick and long board from the remaining core barrel. It will be the seat of the future construction. board width should coincide with the diameter of the bearing portions.

Driving device simple bench of logs: A - a support; In - seat

Driving device simple bench of logs: A - a support; In - seat

To secure the seat to the support, and cut down on the top of each of the grooves of the stumps. The design will be considered properly executed only if board seat tightly lie in the grooves and will be retained in their gravity force. For greater reliability can use nails or pins compound.

To create a bench from a fallen tree requires chain saw

To create a bench from a fallen tree requires chain saw

Useful advice! seat board must always be well sanded. Supporting stumps can also be free of bark and handle with sandpaper or, conversely, leave intact if you want to achieve a distinctive appearance.

Recommendations regarding the production of a log bench with their hands

To make the bench of a fallen tree, you will need a chainsaw. The main material of construction will be the trunk of a large diameter. The minimum length - 1 m.

Simple and beautiful bench built of logs

Simple and beautiful bench built of logs

Useful advice! The design turns out quite rough. After assembly, you can modify it: make the seat and backrest contoured shape, sanded, beautify the product thread.

Set the bench on the legs, made of thick stumps. You can use the same seam connection method.

Related article:

sadovye-kacheli-iz-dereva-svoimi-rukami-foto-i-chertezhi-razmery-iGarden swings from a tree with his own hands: photos and drawings, dimensions and recommendations for the production. Popular technology of structures for leisure, the benefits of wood products.

Products from the materials at hand: benches and benches of the trays with their own hands

At first glance, it might seem that the creation of even the simplest benches will require you considerable time and effort. In fact, virtually any available materials can be used for arranging area suburban area. To understand this, just look at the photos of benches of the trays by hand.

Painted with white paint pallets from the bench with upholstered seat and cushions

Painted with white paint pallets from the bench with upholstered seat and cushions

No need to have specialized knowledge or have a skill with woodworking tools to create a similar structure in his yard. It is enough to have patience and to have on hand 3-4 unnecessary pallet of wood.

The tools needed for the job, there is practically in every home:

  • small electric saw (typically used for cutting branches in the garden or alignment bushes);
  • electric screwdriver;
you can effortlessly from the pan to create a beautiful and functional garden furniture

you can effortlessly from the pan to create a beautiful and functional garden furniture

Bench made of wood with their hands: Photo and assembly designs from the pallet

The design is so simple in execution, that the drawings are not needed for the production of pallets wooden benches with their hands. It's enough to make use of their imagination.

Note! Some pallets to be saw cut to obtain additional elements for the construction of the assembly.

Scheme simple manufacture of garden benches pallet

Scheme simple manufacture of garden benches pallet

The simplest version of the product is created based on two pallets and secured to each other at right angles. As a result, the lower pallet will seat, and the upper can be used as a backrest. To make the structure more orderly and harmonious, the pallet can be a little trim. Fixing is carried out using a screwdriver and screws.

Bench of the trays, decorated with beautiful linen cushions

Bench of the trays, decorated with beautiful linen cushions

Lateral zone may be enhanced by additional plates, connecting the item back and seat angle. Use these parts to create the remaining scraps of pallets after the cutting was carried out major construction.

Similarly, one can create and store, removing the structure from the back and adding thereto legs. Use for this purpose nails or screws.

Bright benches made of pallets decorate the porch of a private house

Bright benches made of pallets decorate the porch of a private house

Photo shops of wood with your hands: the creation of composite products

The combination of textures, colors and materials are welcome in a modern design. If you are wondering on how to make your own hands benches for the suburban area, be sure to use this method. As a result, you can get the cutting-edge design, applying to this minimal effort.

Elegant combination bench in wood and metal

Elegant combination bench in wood and metal

If we take as an example of metal products, in which case you will have to deal not only with the advantages, but also disadvantages. Similar designs are durable and this is their main benefit.

disadvantages metal shops:

  • high cost;
  • heaviness and bulkiness of the structure;
Wooden garden bench with metal frame

Wooden garden bench with metal frame

  • the surface of the material is too overheated in the summer and becomes very cold in cloudy weather, which negates all the comfort.

All these drawbacks are easily compensated for by making the combined bench with his hands: photo successful combinations are not limited to one or more variations. There are plenty of effective solutions that are easy to implement.

Combined bench classical form of metal and wood

Combined bench classical form of metal and wood

The use of metal for the creation of support structure parts is a significant advantage. Feet products are made entirely of wood in contact with earth and grass, constantly syreyut. They begin to develop mold and fungi, which helps reduce product life. Metal such duty is not afraid.

Ideas to create with their hands benches in wood and metal

The easiest project involves the creation of the shop, where the carrier part is made of metal, while the back and seat material is wood. To do this, you need to cook two of the rectangle or square shaped tube. Better if it will be a square profile.

Bright wooden bench with a profile pipe of the frame

Bright wooden bench with a profile pipe of the frame

On the inside of the boxes need to be welded jumper. They will be installed in the seat boards. Fixing is carried out by the weight of people sitting. obtained construction:

  • reliable;
  • practical;
  • stylish;
  • functional;
  • durable.
Scheme metal frame combination bench device

Scheme metal frame combination bench device

You can create a more complex construction, equipping it back and armrests. In this case the profiled pipe with a square cross-section is created as a base skeleton frame with the webs and support parts for fixing the seat and arm rests. By increasing the width of the seat, you can create a comfortable sofa with soft pillows.

This idea can be used for the organization of a patio in the backyard or on the flat roof of the cottage. Make your furniture composition consisting of a table and two large benches or a few single seats.

The original design of the bench located in the yard of a private house

The original design of the bench located in the yard of a private house

For table use the same set of materials: profiled tube (frame) and the wooden boards (table top). When installing wooden elements sure to leave a small gap (3-4 mm). Because wood is subject to deformation under the influence of humidity changes and climatic conditions, this gap is required in order to compensate for its expansion. Otherwise, the backrest part, seat and table top will buckle.

Basic drawing of the garden bench with a metal frame and wooden seat

Basic drawing of the garden bench with a metal frame and wooden seat

Bench made of wood with their hands on a concrete base: step by step guide

Concrete par metal has long periods of maintenance service. He is completely immune to weather conditions, so is considered one of the most durable materials. Having dealt with the technology to create simple stalls made of wood, you will not be difficult to make the bench of the same material, only on a concrete base.

Note! The design is very simple and does not require significant financial investments.

Fig. 1-1. Driving garden benches device made of wood and concrete slabs with mounting dimensions

Fig. 1-1. Driving garden benches device made of wood and concrete slabs with mounting dimensions

To start, you need to prepare parts for further assembly. Wooden bench elements are fabricated using boards with a section 15h3,8 cm. They need to cut it in a special way, so that as a result you get a set of ready-made components for assembly.

Dimensional table for cutting boards:

The length of the wooden details, see Number of components, pcs.
200 5
65 4
17,5 2

In addition to forming the base need to be square-shaped concrete slabs:

  • thickness - 5 cm;
  • length - 50 cm;
  • Width - 50 cm.

The required amount of concrete elements - 12 pcs.

Fig. 1-2. Procedure for the manufacture of garden benches made of wood and concrete slabs: 1 - Preparation of wooden parts; 2 - marking boards, drilling holes therein; 3 - markings concrete slabs, drilling holes in the plates

Fig. 1-2. Procedure for the manufacture of garden benches made of wood and concrete slabs: 1 - Preparation of wooden parts; 2 - marking boards, drilling holes therein; 3 - markings concrete slabs, drilling holes in the plates

Boards 200 cm length should be marked for punching. For this purpose, two marks placed (with a space from the end of the 10 cm and 40 cm). On the other hand similar markings applied. Once marked all the board (200 cm) using a drill with a diameter of 1.8 cm, they are performed in said hole outlets.

Fig. 1-3. Procedure for the manufacture of garden benches made of wood and concrete slabs: 4 - Preparing the back parts to the assembly; 5 - applying adhesive

Fig. 1-3. Procedure for the manufacture of garden benches made of wood and concrete slabs: 4 - Preparing the back parts to the assembly; 5 - applying adhesive

The concrete slabs must also make holes for fasteners. In this case, taken from the upper edge indentation of 7.5 cm, and the left end and right - 10 cm. Draw lines and find their point of intersection. It will be considered as reference markings for making holes. For this procedure, you will need to drill, designed for working with concrete surfaces.

Fig. 1-4. Procedure for the manufacture of garden benches made of wood and concrete slabs: 6 - back collection; 7 - covering wooden parts antiseptic solution

Fig. 1-4. Procedure for the manufacture of garden benches made of wood and concrete slabs: 6 - back collection; 7 - covering wooden parts antiseptic solution

Build a wooden bench with your hands: the initial stage

To increase the service life of the elements of the timber must be treated with antiseptic.

After complete drying of the material can take back the assembly:

  • make a mark on one of the long boards (200 cm) departing from the edges 50 cm. Here will be placed edge line of concrete slabs;
  • perform the indentation 15 cm from the marks previously made (see 50), moving on to the central part of the board. This first zone fixing board;
Fig. 1-5. Procedure for the manufacture of garden benches made of wood and concrete slabs: 8 - the main part of the assembly; 9 - insertion and fastening of threaded rods

Fig. 1-5. Procedure for the manufacture of garden benches made of wood and concrete slabs: 8 - the main part of the assembly; 9 - insertion and fastening of threaded rods

  • perform padding 17.5 cm from the first fixing zone of boards in the same direction. This zone is located between the boards, which is made of rest;
  • made two marks (each 15 cm) with a gap of 5 cm (distance between backrest elements).

Useful advice!All this marking is clearly visible in the diagram (Fig. 1-1), with this stage you should not have any problems. Use drawings to navigate and control their actions during the design manufacture.

Wooden seat bench mounted on concrete blocks

Wooden seat bench mounted on concrete blocks

Treat the adhesive composition for wood zone 15 cm long. At this site you need to attach a previously prepared board (65 cm). Set screws to strengthen the fixing strength. In a similar manner performed assembling boards length 17.5 cm in length corresponding portions.

Benches made of wood, located under a canopy in the yard of a country house

Benches made of wood, located under a canopy in the yard of a country house

To ensure good adhesion of glue, clamp segments (17.5 cm) up until the composition is completely dry. Further, it should be treated with an antiseptic composition of the entire backrest. Increase the level of resistance of wooden details and decorative features to help paint. Cover the timber structure.

construction assembly: mounting frame of the article

The carcass of the product is recommended to start at the same time on both sides. This would eliminate the skew and the need to redo the work. Assembly scheme involves assembling alternate long boards and concrete boards. The elements are connected via through holes 4 M16 threaded rods (two on each side of rod bench). Required mounting length - 55 cm.

Driving device bench cedar bars and hollow building blocks

Driving device bench cedar bars and hollow building blocks

Use to lock the rod washers and nuts M16. In order to eliminate the irregularities, tightening should be done at the same time on each side.

Drawing bench with their hands from a tree and a description of the manufacturing process

This project looks like an ordinary bench. The only aspect that distinguishes this shop from more primitive structures - seat concave shape.

Dimensional table for the manufacture of parts according to:

element position part title Number of units. Dimensions, cm
BUT Support 4 10h10h44
B Drawer side (upper front) 2 2,5h10h120
AT Drawer side (front bottom) 2 2,5h10h120
D Drawer side (lower side) 2 2,5h10h40
D Board (seat) 4 2,5h10h120
E Prop (seat boards) 6 2,5h10h40

Bench made of wood with their hands: how to make the right seat assembly

Before starting the assembly should prepare all the details for the job. Saw timber and cover to the length specified in the table to have turned workpiece.

The most difficult phase of construction of benches - seats for the formation of the supporting parts. We need to clearly follow the recommendations for applying markings to make the right design elements. To do this at the edges two notches indented 7.5 cm from the bottom of the preform. Schedule another point in the center, but now marked up with indented 4.5 cm.

Fig. 2-1. Scheme manufacturing wooden bench with a concave seat

Fig. 2-1. Scheme manufacturing wooden bench with a concave seat

Useful advice! To obtain a precise and accurate cut, use a flexible line of plastic, when you connect a cue point. Electric jigsaw help to make a controlled shear, which is subsequently to be treated with sandpaper.

Now, when all the details of the structure are prepared, you are ready to close the assembly. Supporting elements must be attached to the two side-bar (top) for the seat. It must be done so that each end turned out one part and another was placed in the center.

Fig. 2-2. The order of assembly of wooden benches with a concave seat

Fig. 2-2. The order of assembly of wooden benches with a concave seat

Then indented from the edges (in feet width) installs the supports. The build process for fixing parts need to use screws. On top to get the basics you need to fix the planks that form the seat. On the bench to sit comfortably without fear of hurt or ruin clothing, hats screws should sink into the wood.

The final phase of construction

Further installation is carried out feet. They are fixed to the support piece seat. Increase resistance help tsargi legs (lower). These elements are installed in the last turn.

Wood is warm and pleasant to the touch, making it ideal as a material for the creation of benches and other garden furniture

Wood is warm and pleasant to the touch, making it ideal as a material for the creation of benches and other garden furniture

At the last stage of manufacture of the product design is performed completion and finishing. Recessed cap screws can be masked with mastic for wood. You need to find the right shade of the mixture and add the fine sawdust. This lineup filled voids, which were formed after the tightening screws. The dried surface is treated with sandpaper fine grain, and then covered with a protective varnish and antiseptic.

Wooden bench located in a recreation area, can be used as table

Wooden bench located in a recreation area, can be used as table

  • inlay wire and decorative elements (mounted by insertion into the timber);
  • patterns obtained by burning;
  • carvings.

Useful advice! If you want to give the wood a peculiar color, use color lacquered composition or perform pre-processing of the surface stain.

Wooden bench, painted in cheerful yellow color, fit harmoniously into the overall design of recreation areas

Wooden bench, painted in cheerful yellow color, fit harmoniously into the overall design of recreation areas

There are two burning patterns on the wood technology:

  1. Pyrography - main working tool is a "hot stick". All patterns are carried out manually. Exclusive back of the bench can be ordered individually in a furniture factory, where the patterns are made by laser.
  2. Pirotipiya - die drawing with application of temperature patterns.

The easiest way to decorate the design - add volume decor, reaching from the corners, layout, rosettes and reliefs single composition. The elements can be made of wood, metal, composite, etc. By combining different textures you can achieve a unique design.

instagram viewer