Receptacle with a switch in the same housing and this construct specificity

can be found in this article, what features a product has, as the socket with the switch in one box: specificity and types of designs, the benefits of their use, distribution, wiring diagrams, and practical tips on installation. The text provides guidance on the selection of quality products, overviews popular on the market of manufacturers, as well as average prices for installation.

Receptacle with a switch in one package: features combined products

Modern design living spaces has become more rational. This rule does not bypassed elements and electrical fixtures. This applies to the combined socket with a switch unit in a single housing. Such a design reduces installation time and improve the performance, and that was the reason for the high popularity of these products.

Advantages of combined structures:

• the ability to connect electrical outlets in conjunction with the switch on all surfaces, including concrete, stone, plaster and wood;
• for laying wiring required minimum number of mounting holes and grooves;
• Easy connection scheme, which does not require cables to each point of use a single wire;
• the same parameters of components simplifies the markup process on site;
• if appropriate in joint designs can be combined with low cost options products more expensive.

Note! If one of the components of the structure fails, it is necessary to perform replacement of the entire unit. This is the only disadvantage of such products.

How to choose a power outlet with a switch: sockets, their types and rates

On the market a wide range of products, combined in one unit. By selecting the appropriate option to pay attention not only on the prices and the popularity of the manufacturer, although these parameters are not the last value for buyers. Before you buy a power outlet with a switch in one case, it is necessary to check the product for compliance with the necessary parameters.

Key selection criteria:

1. Technical parameters of the electrical network and its features.
2. Design (configuration, coloring, and so on. P.).
3. Degree of functionality (consider the number and power of devices that will connect).

On sale there are products with different elements of combinatorics. Due to this the buyers an opportunity to pick up the design with a different number of switches and sockets, as well as keys. So you need to know exactly how many lights and electrical appliances will be connected in the room.

Outlets can have both internal and external structure. The first option is used if the wiring hidden in the room. External sockets are designed for open placement system. If the room does not have the conditions for laying flush, renounce the use of bulky external sockets will not work.

The cost of sockets combined with a one-button switch does not exceed 200 rubles. The average price of options "euro" with two keys is about 300 rubles. In this kit allows you to connect devices with a capacity of less than 3.5 kW. Buying the same model with a moisture barrier properties cost about 450 rubles. To purchase a power unit with three sockets and one-button switch will have to spend more than 1000 rubles.

How to connect the sockets and switches: circuit and installation recommendations

Replacement of switches and sockets can be done by yourself or bring to the implementation of the work of specialists. In the absence of knowledge and skills of handling the mains, it is better to give preference to the second option. In this case no risk of a short circuit, as well as the guaranteed compliance with all safety regulations and quality installation.

The average price of the installation of sockets and switches, and related services:

Type is set construction	price, rub.
Escutcheon (preparation of holes in drywall installation)	100
Escutcheon (preparation for mounting holes in the brick)	170
Rosette type outer	250
Replacement mechanism in the inner outlet	250
Replacement of the mechanism in the outer socket	350
Rosette internal type (base - drywall)	400
Rosette internal type (base - concrete)	500
Rosette under external electric oven	550
Outlet under internal electric cooker	700

Note!If you connect such powerful electrical appliances like a water heater need to make the ground connection. In this case it is better to invite electrician. Master cable will pick up with the optimum cross-section and correctly perform wiring to the outlet.

The list of necessary tools for the installation of the product with their own hands:

• Drilling column;
• drill;
• pliers;
• Screwdriver with insulated handles (2 pcs.);
• clippers.

Preparing for installation involves the choice of location for installation, marking application and drilling holes in the wall using the crown. If the wiring is hidden in the room, it needs to form a niche. On the body portion has perforated holes for cables. They should break down.

How to connect the socket and switch from a single two-wire cable

To outlet with the switch in one design provides some sequence of actions during installation. The easiest way to solve the problem involves the use of a clear scheme to connect the wires to the device in the distribution unit.

How to connect the socket on the switch:

1. Formation of openings for mounting indoor unit or selection of the optimum space for installation of external.
2. Definition phase of the electrical panel and de-energize the room.
3. phase supply to the switch. For this phase wire ends are stripped, twisted and covered with insulation.
4. Neutral conductor network is supplied to a power outlet and covered with insulation.
5. Wires are left unused, twisted together and covered with an insulating material.

Using this circuit-breaker and socket connection by binding phase cable is appropriate through a cutout if the network socket is rarely used, and it requires continual switching on and off electrical instruments.

The operating principle of such a structure is extremely simple. If the switch is in the ON position at the outlet is fed through the switch phase. Such a system is useful in cases where the water heater is installed in a room that has no off button. Due to the installation of the combined structure will not have to constantly pull out the mains plug.

How to connect the outlet with the switch in one block

The switch and the socket, are combined in one construction, can be operated separately from one another. For example, in the circuit connecting the bulb through the switch to the socket, the cables with the phase and zero run from the main panel to the distributor boxing.

The box will contain several wires:

1. The cables of the lamp (2 pcs.).
2. The wires leading from the block (3 pcs.).

Lived phase, which runs from the panel is connected to the socket. Neutral conductor of the power supply is connected to the zero cable from the lamp and the wall socket. In turn, the phase wires that connect the switch and the cartridge, twist together and necessarily isolated. Thereafter, using a suitable cable connects ground.

Useful advice!To create a connection between the socket and the plug, located on the switch, it is desirable to use the jumper.

This connection will use one-button switch socket will operate independently from it. The process of switching on and off light fixture lamps in the room will not affect other elements of the structure, and affect their functioning.

How to connect a double switch and outlet network

In most cases, the installation dvuhklavishnogo switch and outlet operate in a partition in the zone between the door to the toilet and the bathroom. Due to this it is possible to control the lighting in two rooms at the same time connected to the AC outlet, any electrical appliances.

To connect using five conductors. They connect the paired structure and the junction box. During operation, you need to make sure that the neutral conductor and the grounding conductor is required to have been connected to a wall outlet and only her. Using the special jumper must be submitted to the phase switch with two keys. This element is present in the switching unit.

Related article:

Compound of wires in the junction box for electrical wiring

Types and methods of installation of junction boxes. How to instal themselves.

According to the double switch circuit pair connects to free living its switching contacts. Through this element will be fed to the phase of the lighting equipment, located in the bathroom and toilet. In the junction box must be free to twist the wires lived with those supplied through the switch phase. Due to this, the system is connected to the cartridge lights indoors.

Grounding and neutral wires are formed in the distributor box by connecting the bare ends of a twist, which were used to connect the outlet. If it becomes necessary to carry out the replacement of the switch key sequence, which serves the voltage across the lighting fixtures in the bathroom and toilet, should be reversed in the switching contacts midrib.

Useful advice!If you plan to install this equipment outdoors or in rooms with high humidity levels, for example, a bath, a shower or a bathtub, you need to make sure that the design has been equipped with protective covers - curtains.

Wiring diagram sockets and switches with three keys

Block with such a configuration is used for saving electric energy. It can function as the main control link for several light sources installed in the same room.

Functional triple switch with socket allows you to control:

• main light source;
• decorative devices;
• additional light sources.

This makes it possible in case of lack of light does not resort to the connection of luminaires, pressing, feeding additional or ornamental sources. If the level of lighting in the room is too big, with such a switch can be reduced.

mounting scheme is essentially the same as in the case of switches having one or two keys. In most cases, a neutral conductor has a blue coloring, and the phase is formed in a red or black. This feature allows designs to easily find the necessary cable. Configuration of the switch is similar to the normal version of the product with three buttons. A distinctive feature is simply that the neutral wire is fed directly into the power outlet.

Features a double connection sockets in the living room

If in one place connects a plurality of electrical devices, it is more expedient to use the unit with two or more outlets. This design can be used to recharge phones, home appliances, computer. In this case, all sockets are located under one cover and are connected in parallel.

Before you get started, you need to form a bridge of three wires and bring them to one seat each. It is very important that the length of the jumper was not too big. Later, because of this socket will not be as it is necessary in the mounting box and the wires themselves will interfere with the process.

The process of connecting multiple sockets in the following order:

1. All outlets are dealt.
2. Produced stripping element (jumpers between the boxes, electrical power cables, conductors).
3. You connect the first outlet, and passing the cable.
4. The socket is mounted in a box on a level.
5. In view of coloring is performed parallel wiring and installing a second outlet.

If more than two sockets present in the structure, the remaining elements are connected in a similar manner. The last component in this case is only connected to three wires.

Useful advice!Cable leading from the junction box, it is advisable to leave a margin. This will provide an opportunity to re-connect stripping and if the need arises.

Overview Legrand switches and sockets, Werkel and Schneider Electric

When choosing products for use in commercial or residential premises, should focus on quality and cost. But these figures are not always easy to select the design with switches and sockets. Even the best brands on the market has hundreds of units in different price segments.

When you purchase is necessary to pay attention to the basic quality criteria:

• maintainability;
• workmanship materials;
• decorative characteristics (design);
• functionality and technical parameters.

Against this background, consumers prefer to buy sockets Legrand, Werkel and Schneider Electric, Bticino, Anam, Makel, Wessen, Lezard, GUSI, DKC. they all meet the highest requirements of quality and design.

Features and benefits of sockets and switches Legrand

Products French manufacturer Legrand is present in the markets of more than 60 countries around the world. From a small family business the company has grown to the size of the group, which brings together under a more than 8 brands.

Advantages of products Legrand:

• extensive range;
• high performance;
• applying quality industrial raw materials;
• the use of innovative technologies in the production process.

The only drawback of the product is its high cost, which is justified by the excellent technical and operational characteristics. Consumers can buy switches, frames and sockets Legrand Valena, Plex, Kaptika, Valen Pace, Galea Life, Kyuteo and other series. In the ranking of manufacturers is a company ranked first, having the greatest range of products and relatively affordable prices compared to other companies manufacturing similar products quality.

Characteristics of sockets and switches Werkel

Werkel company offers high-quality electrical products that are practical, reliable, simple system installation and durability. Such outlets and switches are convenient and versatile. The manufacturer focuses on decorative features. Products are beautiful and ergonomic.

Individual attention, retro switches and sockets manufactured by this Swedish company. These mechanisms are ideal for creating sophisticated accents to masonry, wooden walls and surfaces with a finish in the form of other materials.

Benefits retro series:

• the ceramic body having a heat resistance (from -40 ° to 80 ° C), high mechanical strength and dielectric characteristics;
• coating retains its color throughout the life cycle and exhibit resistance to damage the mechanical properties;
• High current conductivity without heating mechanism;
• stable work during surges;
• switch contacts do not burn out.

Note!Current-carrying component of the construction are made of phosphor bronze. With this minimum service life of 40 000 cycles.

Advantages of German outlets and switches Schneider-Electric

The German manufacturer Schneider-Electric specializes in three directions. The company's activity affects power generation, mechanical engineering and electrical engineering. Production capacity of the brand operated in France, while the main office is located in Germany.

Product Benefits Schneider-Electric:

• high quality;
• stylish design;
• high level of security and functionality;
• Easy installation system;
• an extensive range of design solutions;
• versatility due to the presence of removable framework.

The cost of these products is much higher prices for the Legrand product. Manufacturer maximally oriented products to the customer, so the customer can pick up an assortment of design that meets all their requirements.

Switches and sockets in one case - a practical option items that can be not only easy to install, but also beautiful. When choosing products for the home, it is desirable to give preference to models stocked Enclosures with perforated ribbed on the inside walls. In this case, the fixation on the wall will be more reliable.

Modern designs allow you to perform the installation yourself, the main thing at the same time, carefully approach the implementation of all actions. In the presence of a large number of wires you can make a mistake with a connection, so all the work necessary to carry out extremely carefully or have a qualified specialist.