Rigid connection for the mixer: pluses, minuses, types and installation

click fraud protection

Rigid connection for mixer
  • Pros
  • Cons
  • Types
  • Advice for choosing
  • Mounting
  • How to install instead of flexible
  • Safety measures

A distinctive feature of this connection is the rigid attachment of the mixer and pipes. Some masters consider it more aesthetic than flexible liner, although it is more a question of personal preferences and tastes.

Pros

On the positive side of the hard-wiring type:

  • Looks stylish enough compared to the flexible one;
  • Long operating period, which is about 20 years;
  • High quality materials that are not corroded;
  • The installation is quite convenient( although it has its own nuances, therefore it can not be called a plus);
  • The product is reliable;
  • Due to the smooth surface, keeping the liner clean is not a problem. The dirt on the tube does not accumulate;
  • The device is not afraid of thermal and chemical influences, it can withstand higher temperatures and swings than flexible counterparts.
Advantages of a rigid connection for a mixer

Cons

Anyway, but without cons is not enough.

We noted that installation is a controversial issue, because it is also worth attributing to minuses. Performing it is quite problematic, since you are limited in moving the liner. Actually, this forms another drawback - stationarity. The product does not bend, does not lend itself to even slight deformation, which would allow for a more correct, aesthetic installation.

Otherwise, even experienced specialists do not find serious shortcomings, which could be characterized by rigid podvodku.

The drawbacks of the rigid connection for mixers

Kinds of

Classification of the types of rigid podvodki can be based on the materials from which it is made in our time. It is a tube of metal. This metal, in turn, can be:

  • Brass;
  • Steel;
  • Copper.

Which option is more reliable - it's up to you. In many respects it depends on the manufacturer and his degree of responsibility for his own products. The most important thing for a metal to have anti-corrosion properties, was not a cheap forgery. Unfortunately, some firms use ordinary black metal, which eventually rusts. And to hide this fact, cover it with special paints and compounds. As a result, the tubes look like steel, copper or brass.

Rigid brass feeder for mixer
Rigid steel feeder for mixer
Rigid copper wire for mixer

Tips for choosing

When choosing a rigid padding for your mixer, try to observe a few simple rules. They are recommendatory in nature, but they allow you to make a really correct purchase.

  • Material. Carefully study the material from which the liner is made. In fact, steel, brass and copper have their advantages and some nuances, because the most important thing is the lack of forgery. If you are told that this is brass, you should be sure of the fairness of these words.
  • Size. Rigid eyeliner is problematic a bit in that it is demanding on the right size choice. Take into account the diameter of the water pipe and the inlet to the mixer. Some houses are equipped with non-standard communications, so before going to the store, make sure to take measurements.
  • Length. A separate topic for conversation. The bottom line is that you need to choose the right length. If the tube is short, you will have to buy a new one or weld the missing element, which is absolutely the solution for the most extreme case. If the tube is long, you can not fully install it, as the material does not bend. This is the main problem of choosing a rigid cabling.
  • Manufacturer. Now the market has its own elite of manufacturers of sanitary ware and sanitary equipment. Also, for sure, in your city there is a store that enjoys the greatest authority. It is desirable to buy products from them. Both the manufacturer and the distributor are not interested in losing credibility and clients. Because they try to offer high quality goods. He needs you.
  • External Aspects. As a rule, try to hide the eyeliner from the eyes by doing the skin, installing bathroom furniture and so on. But in some situations, the eyeliner remains visible, which means you have to pay attention to its design.
  • Price. Let's just say one thing - a good hard-wired connection can not cost a penny.
Tips for Choosing a Hard Strainer for Mixers - How to Choose Hard Wiring

Mounting

Observing the sequence of installation work, you can easily connect the hard cabling to your mixer.

  • Determine the location for the mixer.
  • Prepare the wall for subsequent installation of the tubes. Mark special strips to place the pipes. Make a stroba. Some tubes can pass through the wall, others - with a depression. Do not forget, the system will have knees, so note them on the wall beforehand.
  • Assemble the pipes. Predominantly even experienced domestic masters entrust this task to professionals. Anyway, do not forget to screw the eccentric at this stage. The rewinding is not required yet.
  • Secure the old mixer to ensure that the system is correctly positioned. Do not worry, on all models of mixers there is an identical distance between landing points.
  • If you understand that everything is done correctly and smoothly, proceed to sealing the strob. To do this, you need a cement mixture. Also provide a layer for the subsequent application of the finishing material( since this is a bathroom, most of us use ceramic tiles).
  • When the cement mixture dries, you can remove the old mixer, install a new one in its place.
  • The final stage will be the surface treatment of walls and the installation of tiles. Ensure that all fasteners are tight so that there is no leakage during operation.
Mounting the rigid feeder to the mixer

How to put instead of a flexible

You probably can see for yourself that flexible piping is everywhere, almost everyone in the house, office and so on. Mount it easily, it costs a little.

But many people know that it needs to be changed every 3-5 years?

This is caused by the fact that the piping is getting old, the hoses inside it are covered with cracks, the seals are out of order, the elasticity is broken. As a result, leaks are almost inevitable.

In this component, a hard analog of the pipeline is more reliable, able to work with higher pressure, and the operating time is several times higher.

Specialists recommend that when repairing the bathroom, it is possible to connect the rigid in the future, even if the installation is now flexible. The sockets located under the sink must not be more than 0.5 m from the mixer. If this condition is not observed, you can use an alternative solution - corrugated tubes. But they must be made of stainless steel.

Unscrew all old tubes, remove the mixer and unfold the corner valves. Screw the tube into the mixer and make sure that everything fits in size. If not, unbend the product neatly or mark the points to cut off excess elements.

After you have aligned the tubes to the correct dimensions, check the axle ratio and assemble the system. The first to fix the mixer to the sink, after which the collets are tightened. Turn on the water and make sure everything is working properly. Also do not forget to check the system for leakage after a few days. If there is a decorative finish or furniture covering the system, do not install it yet. Only when you realize that everything is working properly, close the line.

Replacement of flexible hose to rigid

Safety measures

Specialists recommend using a pipe bender during the installation of a mixer with rigid piping. This device allows you to draw the pipes without bending them too much. Inflection can lead to undesirable consequences.

Of course, one of the most important conditions for personal safety is the water shut-off before starting repair work. Observe safety regulations, use protective equipment, gloves when working with metal.

Security measures to establish a rigid wiring to the mixer

instagram viewer