White plinth in the interior: the features of the application

To emphasize a complete interior and hide any deformation, it is important to choose and install the outdoor decor. In recent years it became quite popular white plinth made of MDF or PVC (polyvinyl chloride). Surface smoothness, simplicity of maintenance, durability, moisture resistance and the absence of additional processing for installation in high demand today. About the features of skirting the rules and their installation will be discussed in this article.

White floor plinth made of PVC or MDF: which is better

Before you buy a white plinth, it is important to define priority areas for a material. PVC skirting actual floor tiles, linoleum or laminate. In the production of such decorative element applied extrusion PVC. For a variety of colors corresponds to film or staining material.

Material for the production of MDF appears as a result of exposure to vacuum and pressing wood fiber character. In its production does not use resin. Outside treated painted or protected melamine decorative paper. Skirting is environmentally friendly. The cost of these two materials (PVC and MDF) will be low.

There is a third type of floor decor - a plinth made of MDF, topped with PVC film. By choosing one of three options for the material, many opt for white. Last versatile and fits almost any color scheme inside. If earlier the choice of such elements repelled by the color of flooring, now white color contrasts beautifully with the dark wood and emphasizes all the beauty of the selected style.

Note! White in interior baseboards are broad or narrow. The first is ideal for large spaces. They are also perfectly protect the lower part of the wall, hide the wire and trim any errors.

Skirting MDF white: Specifications

Buy white floor plinth many seek an ulterior motive: MDF - a more environmentally friendly material than particleboard. In its structure and no phenol resins. The front layer material bonded dyes impregnated paper. This solution saves topcoat from flaking likely over time.

Melamine coating on the above paper is responsible for protecting the decorative element on stubborn stains pollution, UV, moisture, and dust. Skirting outdoor white (wide or thin) advantageously emphasizes the strong interior side. The material is easy to clean and inexpensive. The only drawback - the excessive fragility.

You can buy MDF baseboard white or any other color from light to imitating natural wood or stone. Often, in order to achieve the originality rooms employ contrasting colors. In some cases white doors and white moldings are considered ideal option.

Outdoor decor attached to the wall in any the following ways:

1. Application of liquid nails and glue in the absence of relevant fastening strips channel. Carefully fit the size plinth and performing accurate calculation of the parameters, the adhesive is applied to the plane of the plinth.
2. Using screws with dowels made for greater adhesion density. The method involves drilling a small hole in the wall for the anchors, which are screwed screw.
3. Clips, fastening slats, the latch - light installation method. Assumes mounting channels on the back side of the plinth.

White plastic plinth: a material structure

One of the leaders of the beautiful decoration of the floor and hide the technological gaps in the repair also considered a plinth made of PVC. PVC production process is divided into several types.

semirigid - white baseboards flooring produced under high pressure. The modified structure of the material acquires a flexibility that is suitable for laying on the surface of curvilinear character without the need to form the slit.

Hard Cappings floor, plastic (white or any other color) - the most common type of decoration. Traditionally placed on the areas of rectilinear nature. Rotary parts are connected to certain areas.

foamed form is characterized by high thermal insulation, which serves as an additional insulation floor coverings.

Selected white PVC moldings in accordance with the geometry of the walls of the room parameters and other additional factors. The installation of this decor maximally simplified by composite construction: decorative panel located outside mounting film - inside.

How to mount the plinth to the floor? It is possible to generalize that there are three ways of fixing, namely:

1. On samonarezayushy screw.
2. Glue.
3. On the clip.

White plinth in the interior: the photo and use the urgency

Tall white baseboard, as well as low, due to the color, is considered to be a godsend to implement any design ideas.

The combination of white outdoor decor with a ceiling molding of the same tone and with dark paneling can create an interesting contrast and hide any flaws structural nature.

Classic tone perfectly sets off the pastel shades, increasing the space visually. Dark doors and floors combined with floor decor white designed to visually expand a small area.

Commonwealth with fancy ornaments or plant converts walls, emphasizes the elegance created motifs in the rococo style, Art Deco or Art Nouveau. White floor plinth in the interior creates a monotone style, while making a clear outline of the ceiling, walls and coatings line.

How to choose a plinth in color - of interest to many. The above information will help determine the choice of tone border, taking into account the style in all rooms.

On a note! The wide white plinth in the interior is relevant to ceiling height of not less than three meters. Otherwise, the decision will lead to a sharp reduction in the visual space.

White plinth in the interior: design rules

It is important to know how to emphasize the stylistic decision rooms, not completely erase everything done before. The important points of registration are:

• white wooden baseboard and the floor - the classic version;
• dark doors and flooring in combination with a light tone and outdoor decor trims look great;
• duet "white plinth - white wall" looks elegant against the dark flooring that is suitable for small rooms;
• white trim and baseboards are relevant and bright walls;
• large room visually reduced through a combination of: white + black plinth door.

Important! After installation of plastic and MDF outdoor inlay further recommended paint matte white paint to be removed from the chemical reflection coating.

Operational properties of white plinths MDF or PVC

The uniqueness of the decorative element is as follows:

• no need for surface treatment;
• perfectly keeps the original color and shape;
• ease of installation;
• in addition to the white material can take any color, up to simulate the natural wood or stone;
• is not afraid to temperature changes.

What to buy a white plinth (MDF or PVC): types and sizes

Since the production of a floor inlay in the top ten leaders in the market for several years. His popular material is required number of functional characteristics:

• Grandfather white plinth - effective protection of walls from mechanical damage and moisture;
• economical way to quickly hide small defects remaining after laying the floor covering;
• the presence of the cable channel on the inside helps to skillfully hide the wiring.

The height of the decorative strips can be up to 100 mm. White plastic moldings (high) allows to put almost any furniture close to the walls of the room.

White high floor plinth of MDF or PVC is selected based on the height of ceilings. For standard 2,7 m suitable strip of 70 mm. In houses with three-meter resolution parameters strap desirable within 70-90 mm. For higher ceilings should reflect on the acquisition of a border of more than 100 mm.

plinth length is 2500 mm, the maximum width - 25 mm, the height - 150 mm. Borders are often supplied in long rolls from 25 to 50 mm, which appear to the purchaser in the form of flexible tape. In most cases, stacked along the perimeter thanks to seamless technology. Joints between the respective decorative elements are closed areas.

Related article:

Wiring Rules white skirting boards MDF or PVC

It has already been shown how the installation of curbs, is now worth considering the important nuances of the process. Before you buy a white plinth to the floor, not hurt to clarify all the details of the installation.

For plastic and fine fraction (IRF) curbs manufacturers produce special fittings:

• side stub;
• connecting elements for 2 slats;
• angles (internal and external).

In completing the above mentioned details are not included. They bought extra, you first need to calculate their required amount. Border in the joints, in caps, corners inserted to a maximum of 5 mm. Therefore, the angles of the decor encouraged to cut flush with the wall.

For mounting the curb using a dowel screws required hacksaw, hammer drill for concrete and stone, screwdriver, pencil and tape measure. Before installation, it is important to check the tone of each rail. Even in a single package shades of products may vary. In order to minimize the difference darker tone is better to install in front of the light source.

Installation via anchor screws in the curb-drilled holes corresponding to every 300, a maximum of 500 mm. Profile with cable channel cover special decorative strap.

Deciding to install to use the clip, it is important to secure them to the wall dowels, screws. Mount is placed on the perimeter of the room every 400, a maximum of 500 mm. To the profile easily buttoned, clips should be on one line. This type of installation is only suitable if there is smooth walls. In whole hide baseboard gap corresponding to tone plug material.

When the installation is missing slats length, the cut can be made at an angle of 45 degrees. Then the upper part tends upward, in the opposite direction of the door.

Important! Counting caps should not forget the registered places of contiguity - the doorway and at those points where the clutch in a straight line is not possible.

Selection and installation of plastic moldings based flooring

Selection of borders made of PVC and their installation can be carried out in view of the floor covering:

• under the carpet;
• under the laminate;
• universal form.

Skirting for carpet and laminate

Plastic element for carpet created from the profile of the L-shaped type. For coating a solid fixation at a particular fabric strip is inserted into the groove. Often the floor molding is equipped with adhesive tape holding the material in place. The latter option is applicable to the floor of the linoleum.

Another variant of a carpet - availability outside the channel, when the bottom edge tightly pressed against the surface, and the remaining space is filled with the same material as that of the floor. Cables and wires are placed between the plastic and the wall.

Externally, skirting for laminate resembles a flat bar with the presence of a slightly rounded crown. The thickness should not exceed 15 mm. Such a curb made both free channels for wiring, as well as with them.

universal plinth

The model resembles the familiar wood décor. It has a slightly extended from the bottom edge. Outwardly like a "boot." A good background will become white baseboards dark floor, this technique can be applied to any surface finish. If necessary, possible to use the presence of even several channels for the cable.

An important advantage of the universal border experts say the presence of soft lining at the top of the element. This facilitates snug fit to the wall. The interior space effectively protected from debris and dust.

Secrets of the plastic mounting the curb almost identical to installing the MDF material.

Mounting plinths

Installation instructions skirting is in compliance with the order of the following:

• choice of material;
• exact calculation mounting area;
• purchase and delivery of selected material at a specific address;
• mounting the curb, taking into account technologies such as decor and other important nuances.

Style and white baseboard in the interior: expert advice

As a white plinth fit into a certain interior space can be easily disassembled with specific examples.

Classic style loves high curbs in white. In this case, in the same tone must be chosen sockets, doors, pilasters, and other decorative items. The walls and floor may be in a dark color.

For style minimalism relevant MDF material or plastic under the tree. For this design is characterized by the softness and lightness, are available in the materials.

The rustic interior is different in each state. Country Russian is clearly different from the English or French Provence chalets. Common among them - a natural, "healthy" minimalist, handmade textiles, especially antique or old furniture. Therefore, more appropriate curbs under the tree.

Glamorous design welcomes MDF white, sometimes supplemented with stainless steel strips.

High-tech requires a large space for maneuver. There are equally good looks plastic, MDF, stone, wood or any other modern material.

Vintage interior suggests the presence of white PVC profile, MDF and the same tree.

How to choose and buy a plastic plinth: white and other shades

In addition to white, borders can take a variety of shades. You need to know three important color selection rules moldings. Selection is carried out as follows:

1. Under floor tone when the baseboard does not attract attention to themselves and perfectly blends in with the rest of the style.
2. Under the colors of the walls. The selection process in this case is more difficult because of the different shades of furnish that happens quite often.
3. By the tone of the door opening, when the plinth it becomes a natural extension. Therefore, the border must be made of the same material as the door.

Placed accents in the interior: the color combination

As to buy a white floor plinth today sought by many because of the peak of popularity, it is necessary to know more about one moment. Both due to their achieve the desired effect? Wide and extremely bright floor element solidly looks with columns of the same pitch.

Elegant looks white against the backdrop of the laminate. Skirting great "pulls" the room is not only for the flooring during installation, but also at the top - near the ceiling. Lighter tone is indispensable for severe congestion space abundance of colors and details. This is typical of the baroque and classical interior style.

Dark door and the floor, along with a light edging give the room a "transparency" that avoids monotony. In this case, the width of cornices, baseboards and casings must be at least 8 cm.

Plinth and doors - light with a dark color sex - give the solemnity of the room. Suitable for any style of interior. True to the bright decor has not lost its appeal, it must be washed frequently. The most important combination of these colors in large rooms with a minimum of furniture.

Bright door, the floor a dark color and white plinth - the key to creating an artistic image of the entire space. Saturated color doorway focuses on a specific area, which is important for the kitchen, hallway or foyer. Contrasting colors also look great when you create a style of pop art and minimalist interior.

Care white baseboards and additional tips on choosing

To curb white longer retain its original luster, regular maintenance is important for him. Suffice it at least once a week to brush away the dust from the surface with a soft dry cloth or a special brush. Impurities are washed away using appropriate abrasive cleansers.

Having found out that the surface of plinths MDF or PVC smooth, moisture resistant, neutral to household chemicals, simplicity in operation, many are moving from words to deeds: taken over the choice of material.

When selecting the size and color of the curb is considered everything from the height of the ceiling to the color palette and style premises. It is considered that categorically do not fit the narrow profile and, on the contrary, are not suitable for wide variations small rooms for large rooms.

White plinths PVC or MDF is recommended for those who value practicality, durability and beauty of the interior decoration. Such decoration fits perfectly into the room, hiding any expansion gaps. Although the exact "date of birth" of these strips is unknown, they are at the peak of popularity.