Video paving laying their hands: step by step guide

The most economical for this tile is manufactured vibratory casting method

All types have their advantages and disadvantages, different costs and packing technology. His hands paving tiles of any kind can be laid, to understand in detail its specific features.

Making tiles vibratory casting method

This is the easiest and cheapest way. It is based on the ability of compacted concrete in the process of vibration. Ready solution filled in plastic molds and installed on a special table, which produces a vibrating motion. Then, the preform is placed in a thermal chamber for drying. After some time, tiles ready for use. The whole process takes very little time and resources.

Track and yard of pavement tiles are an ornament of any court

To create different colors are used dyes that are added to the solution. Not much of a challenge to even open your Minifactory in the garage for the production of this type of paving slabs. Videos laying their hands, and the production of this material helps correctly implement the project.

Advantages vibrocasting tiles are to:

• available glossy surface;
• susceptibility to a variety of dyes;
• low production cost.

The path of paving slabs, surrounded by garden flowers

However, it is not without significant drawbacks:

• weak strength;
• bad frost;
• short service life.

In addition, it is impossible to automate the production of this material. Based on the characteristics, vibrocasting tiles can only be applied to the device and garden paths, it is desirable, in the southern regions of the country, as large temperature fluctuations destroy her very quickly.

Molds for garden paths with their own hands (video)

Quickly and easily you can arrange the track using Forms for paving slabs.

Useful advice!Quality tile when struck against each other produces a characteristic ringing sound.

Pressed kinds of tiles

vibropressed tile production technology is markedly different from the previous one. Shape, filled with a solution of concrete, connected to a piston which makes a vibrating movement, creating alternating pressure in the working chamber. Due to this, there is a strong compaction of the mixture. Heat treatment is no longer required. This tile is a much more durable.

Hyper allows you to completely abandon the vibration piston. This creates even more pressure due to which the concrete is compacted. When using this method, the production can be fully automated.

Common sizes and shades of paving slabs

Useful advice!Too rich color tiles can talk about adding a cheap bright colors, which are easily washed away by rain.

Thanks to a sufficiently high strength and durability, compact paving slabs may even be applied to Device entrances to houses, because it can not withstand the heavy traffic of passenger transport, if you follow technology stacking. The hands of the paving tile type, each able to put in the presence of basic skills and tools.

How to make a garden path with his own hands (video)

Polymer tiles

This is a special kind of innovative pavement coating. On the other it is not only the manufacturing method, but also the composition of the main components. As part of the cement is completely absent. But the basis is the usual sand. As binders are the polymers and plasticizers. Moreover, dyes are used to impart various colors.

Related article:

Paving tile for tracks in the country. Prices and types. Styles tracks in the country, paved sidewalk tiles. The correct choice and laying paving slabs. Inspirational photos. Video instructions.

Sand sieved is calcined and blended with polyethylene. Then heated to 250 degrees, and the remaining components are added. The resulting mass is poured into molds and pressed. Tiles obtained in this method, do not miss a moisture that completely eliminates the possibility of cracking under the action of its freezing water.

The wide garden path, lined with paving slabs

This kind of tiles has many advantages:

1. Wear resistance and strength higher than those of other species.
2. It does not wear over time.
3. Moisture resistance.
4. Not afraid of cold weather.
5. Chemically active.
6. Easy installation.
7. Low weight products.
8. A large range of colors and variety of forms.
9. Long service life.

In this case, only one drawback - the expansion in hot weather. In this regard, the technology of laying their hands paving tiles of this kind involves leaving 3 mm clearance.

Laying tile circles with an original combination of colors

Useful advice!On the reverse side of the tile should be yellow spots. Their presence indicates a violation of technology, in particular, the use of clay sand.

Video paving laying their hands: step by step guide

If the decision on laying paving slabs with their hands, step by step guide for the implementation of this process will be quite superfluous. If we talk about ways of tiling, they are many. All depends on the imagination of the host portion. The pattern may be: in the form of Christmas trees, staggered, braided or circles. It looks nice and easy chaotic pattern. stacking technology is not dependent on the imagination and can be:

• on a substrate of wet sand;
• using a sand-cement mixture;
• laying on the grout of cement and sand.

Laying of paving slabs with their hands

The first method involves the preliminary sand cushion device. In the second embodiment, the cement is added to the sand and watered slightly. When using the third method for preparing the solution in a proportion of 1 part cement to 5 parts sand.

Useful advice!When counting the number of tiles necessary to add from 5 to 7% of the scheduled amount, as in the case of shortage, can not find precisely the same shade.

Sidewalk tile has a wide range of sizes, textures and colors

Having defined the pattern and technology, you can start laying the paving slabs by hand. Step by step instructions includes the following steps:

1. The upper soil layer was removed at 15 cm.
2. Formed biases, both along and across the path for drainage.
3. The marking portion at which the work will be performed, pegs and twine.
4. The apparatus borders if necessary.
5. The formation of the selected type of cushion thickness of 7 cm.
6. Alignment level surface.
7. paving and its compaction.
8. Finishing grout joints.

scheme paving laying on the sand-cement mixture

If the track is with borders, then they should be fixedly installed on a concrete solution to the coating device. Tiles must be laid first nearby curb. Then you need to move to the middle. In order not to crush the movement already prepared surface should be on my own. Tamping is done with a rubber or wooden mallet.

If any tile falls unevenly, it is possible to pour the sand or on the contrary clean, subsequently producing extra rammer. The track width is desirable immediately selected so that it included an integer number of rings. If this is not possible, then one along the borders of the tiles can be cut with a special nozzle grinder stone.

EXAMPLE paving laying using geotextiles

The final step will be grouting. It is made of sand and cement mixture. Sutures backfilled it to the required level.

Useful advice!Always leave a few spare tiles for possible future repair track.

Create your own hands path of pavers will long to please his master flawless service in any weather only the correct choice of the type of tile and the strict observance of technology stacking.

Garden path with his own hands (video)