Drawings and photos Garden swings his metal hands: the size and

Swings of thin tubes, located on the terrace of a country house

Swings of thin tubes, located on the terrace of a country house

Note! On the basis of these elements with equal success can be created benches family type and children's rocking the small size.

Before proceeding to the planning and development of drafts garden swing with your hands from metal, it is necessary to determine the type of future construction. To do this, you can explore the complete systems offered by modern industry.

The original swing-type suspension with a metal frame

The original swing-type suspension with a metal frame

How to make a garden swing their metal hands: Photos and examples of products

If you are puzzled over how to make a swing with his own hands for the children, take in the exemplary embodiments of factory production. Such products have correctly calculated the design and presented a lot of interesting design decisions. You just need to create a similar swing from scrap materials.

Factory garden metal swing set in the garden of a private house

factory Garden swing metal, set in the garden of a private house

Photo Garden swings with his hands, created by forging

Swings of this type are carried out mainly for installation in areas of country houses. To create these products require handling skills to the welding apparatus and the metal or you can hire an assistant. In this case, the swings are more durable and powerful than the other options of metal structures. Additionally, you get the original product which can be an interesting decorative addition to the landscape and the exterior of the house.

Driving with mounting dimensions forged garden swing (1 inch = 2.54 cm)

Driving with mounting dimensions forged garden swing (1 inch = 2.54 cm)

Metal products made by forging, have a high cost. But it is justified by excellent decorative properties.

Useful advice! Use similar design to maintain the overall design of the house and the surrounding area defined by a fence, Window bars, street lamps, benches, balconies, stair railings, canopy or pergola, which are created in accordance with this technologies. To achieve unity in design, perform forging the same or a similar pattern on all these products.

Weightless in appearance and elegant wrought-iron swing with colorful pillows

Weightless in appearance and elegant wrought-iron swing with colorful pillows

Features garden swings his metal arms

Metal structures have the largest number of advantages compared with products made by other materials. That is why the Internet there is such a large number of photos and drawings of children's swings his arms in metal.

The technical and operational characteristics of the swing, the metal based:

  • long-term maintenance service - one of the main benefits. The metal is not exposed to the damaging effects of factors such as, for example, the processes of putrefaction. Breakage due to cracks of also excluded;
Unusual Swings made of thin metal tubes

Unusual Swings made of thin metal tubes

Cons improvised swing for metal cottages

Despite the apparent attractiveness of metal products, by themselves they can not fit harmoniously into the landscape of the suburban area, as is the case with a swing made of wood. This will require stylistically support their design, adding similar elements in the exterior of the house or garden.

Note!Metal structures can be made with your own hands, but at the same time you need to study welding technology and have the appropriate skills and also to purchase or rent the necessary equipment.

Comfortable metal swing with braided plastic seat

Comfortable metal swing with braided plastic seat

One of the positive characteristics of the material, namely the metal and the hardness of its strong structure, can be regarded as a disadvantage. On the one hand, a strong and solid swing - what you need to give the other - they can cause serious injuries that can get a person being struck. In comparison with wood, soft in nature, at times dangerous metal.

Related article:

kacheli-dlya-dachi-svoimi-rukami-foto-1Swing for the garden with his own hands: photos and step by step instructions.Recommendations regarding the production swings for children and adults at their summer cottage. The use of scrap materials to build structures.

Products from metal corrosion. Rust can lead to a gradual degradation, so the durability of the structure may be provided only provided proper care. To prevent the occurrence of corrosion, quite promptly cover metal layer of the ink composition, intended for metal surfaces and outdoor environments.

Suspended swing for children with a frame made of metal

Suspended swing for children with a frame made of metal

Drawings and photos Garden swings his metal hands: the size and technology

Made with their own hands Garden swings may have a different type of frame. On the basis of this criterion distinguishes between the following designs:

  • collapsible;
  • welded.

Welded swing types require the use of the welding machine and other special equipment. As a result, you get a strong and rigid supporting part, which will exploit the design for many years without any health risk.

Mounting dimensions frame garden swing of profile pipes

Mounting dimensions frame garden swing of profile pipes

If you can not handle welding machine, choose the swing with a collapsible design. frame assembly principle is twisting nuts and bolts of all elements of the product. Perform such work can each.

Note! Over time, made with their own hands Garden swings of metal thread at the joints under the weight and other loads gradually becomes loose. As a result, there is free play (free space). It can provoke a structural failure, resulting in human injury may receive. To avoid this, fasten items with growers and locknuts. Remember to tighten the joints key.

Modern design metal swing for the garden

Modern design metal swing for the garden

Brief classification of garden swings his metal arms

The easiest way to create a design on the finished drawing garden swing with your hands from metal. Considering the scheme, it can be seen that the configuration of support varies.

A base skeleton-shape consists of two bars which are interconnected at the top. Approximately in the middle of their height has a jumper. It is designed to increase the rigidity of the structure. There are no props and bridges that are L-shaped.

Bright children metal swing with the supporting pillar-shaped

Bright children metal swing with the supporting pillar-shaped

Another type of support - with the bar elements forming the base of the U-shaped form. Creation of such a design takes less effort, but the swings that are less stable. Their operation will be a long and safe if the base supports placed in deep wells in the ground and is well set in concrete.

In addition, all metal products can be divided into two groups:

  • stationary - supporting part swings firmly concreted;
  • portable - fixed with anchor bolts or bent rebar, which is hammered into the soil.
Metal swing, located in the garden of a private house become a favorite place for recreation

Metal swing, located in the garden of a private house become a favorite place for recreation

Technology for creating swing their arms from the shaped tube

Swings are the most common variants of construction. They are comfortable, practical and comfortable. Equip product awning that protects from direct sunlight. Due to this seat will not overheat, while riding the process will be even more comfortable.

For the manufacture of a canopy for children's swing from metal with their hands can be used textiles, canvas, wood with soft tiles of the roof. But the most suitable material is polycarbonate. Polycarbonate sheets are transparent, so under a canopy is not dark. In this case, they disperse well in direct sunlight.

Drawing frame for garden swing of the shaped tube

Drawing frame for garden swing of the shaped tube

The list of required tools and materials

Before you make a garden swing with your hands, take care of the availability of appropriate tools:

  • grinders;
  • builder's level and tape measure;
  • the welding machine and safeners (for use with the apparatus);
  • electric drill;
  • Set of drills intended for operation with metallic and wood surfaces;
The choice of designs to create a metal swing his arms wide and limited only by your imagination

The choice of designs to create a metal swing his arms wide and limited only by your imagination

Drawings and photos swings his metal hands: the preparatory stage

At this stage the selected area for mounting a swing determined by design dimensions. The optimum size of the outboard bench of 1.5 m. This is enough for a swing could accommodate two or kata prilech one.

Useful advice! Be sure to make the gap between the design of the rack and the lateral part of the bench. Minimum size - 300 mm.

The process of creating garden swing structure consisting of metal pipes

The process of creating garden swing structure consisting of metal pipes

This information will assist in the further assembly. Due to such structure design becomes necessary level of rigidity. To choose the right width of the base, you can build a very stable product. Take the basis of the work rule, the larger the angle, which is on the top of the triangle between the base and sidewalls, the more stable the design work.

Scheme frame swing apparatus with metal pillar-shaped: 1 - a flange; 2 - a nut; 3 - the crossbar; 4 - Eye nut; 5 - Front-support frame; 6 - screed frame; 7 - a bolt

Scheme frame swing apparatus with metal pillar-shaped: 1 - a flange; 2 - a nut; 3 - the crossbar; 4 - Eye nut; 5 - Front-support frame; 6 - screed frame; 7 - a bolt

General dimensional parameters are calculated individually. Under these parameters are adjusted on the visor of polycarbonate and suspended benches. Experts recommend mandatory to prepare drawings showing all dimensional design parameters make it easier to work with the material. Subsequently, it will save you from mistakes and save time.

Dimensions of various mobile-metal swing seats. Similar designs may be made personally

Dimensions of various mobile-metal swing seats. Similar designs may be made personally

Assembly drawings swing of shaped tubes with your hands: the skeleton of the

Work on the frame assembly is recommended to start with the side parts. For this purpose, on the basis of drawings is necessary to put marks on the tube and to cut them with a grinder. check the dimensional accuracy before assembly. All four elements of the sidewalls should be similar to each other. They need to be connected in pairs using a welding method. As a result, you should have two identical parts L-shaped.

Driving device frame size for garden swing metal

Driving device frame size for garden swing metal

Next, the sharp end is located at the top of each of the parts, sawn on one level. This procedure is performed in order to be able to form a small support surface for fixing the horizontal beams.

Useful advice! Use a pre-prepared template for the job.

Swings of the unusual shape of the metal may be a main attraction infield

Swings of the unusual shape of the metal may be a main attraction infield

The width of the support frame (short side) size must correspond to the distance that is formed between the paired side portions pipes structure. Welder sidewall welded to the support frame of rectangular shape, and then the horizontal bar (top of the side posts).

All stages of the carcass parts must strictly obey the laws of geometry: the side racks have vertical type arrangement, the horizontal beam (beam) are designed for suspending the bench lies parallel to base. To control the build settings, use the building level.

The circuit teeter frame of profiled pipes

The circuit teeter frame of profiled pipes

wooden seat assembly technology for swings

Assembling benches - an important stage of construction. Especially if you create drawings teeter metal hands. The seat should be based skeleton base made of angle steel. To obtain bench with good back support, keep it at a certain angle relative to the seat. Size optimum angle is 120 °.

Garden swings family type with a metal frame and wooden seat

Garden swings family type with a metal frame and wooden seat

To perform correct bending corner cutout in the shape of a triangle (60 °) on a single shelf. The frame part of the seat is made of a rectangular metal profile by welding method. The side parts should be connected by the marginal zones by horizontal crosspieces. Connection area must be in the place where the bent structure.

Three different variants of seat to swing with the metal substrate on which wooden slats fastened

Three different variants of seat to swing with the metal substrate on which wooden slats fastened

Useful advice! Optionally, you can improve the design, adding to the seat armrests. They will increase the comfort and safety.

Regardless of whether you are creating a design for the swing with your hands or children engaged in manufacturing products for adults, back and seat must be completely smooth. For this purpose, suitable pieces of wood or boards, carefully treated with sandpaper (first large grain, then fine).

Unusual outboard swing type of metal frame

Unusual outboard swing type of metal frame

Boards are cut the required size and attached to the frame through pre-formed holes bolts so that their heads are recessed. Before final assembly of wooden construction elements are processed and lacquered antiseptic composition and the metal - primer and paint.

In the corners of the frame portion bench mounted eyebolts. Chains are attached to the lugs of the bolt snap hooks or threaded couplings. For hanging benches also need to install the eyebolts on the product or on the corners of the seat edges.

Procedure for the manufacture of garden swing with a metal frame

Procedure for the manufacture of garden swing with a metal frame

Production visor for construction

The manufacturing process of the cap is not required. But if you create the design of the swing with your hands for children, should think about comfort and protection from the sun and rain.

For this it is necessary to make a rectangular structure, based on which the metal frame is, reinforced webs. Above the fixed structure polycarbonate sheet. Installation of the visor is carried out under a slight angle, so that the rain will flow freely down.

Metal swing sitting room type with a peak set in the yard of a private house

Metal swing sitting room type with a peak set in the yard of a private house

Take to perform the framing of the visor several metal profiles with a square cross-section of small size. All these elements are bonded by welding, after which the hood can be attached to the upper frame portion swings. This is done also using the welding machine.

When all work on the assembly completed, the design is subject to final treatment. The surface composition of the soil is covered with a swing, and then painted in any desired color.

Various options for a canopy over the polycarbonate swing

Various options for a canopy over the polycarbonate swing

The final stage of construction

When the paint is completely dry, the cap is fastened to the frame sheet is polycarbonate. To do this, use screws with sealing washers.

Useful advice! Close the end portion of sheets polymer profile. It will protect the hollow polycarbonate structure from falling insects and dust, will retain its beauty and accuracy.

Wide range of colors - one of the advantages of polycarbonate. You can choose the color of the coloring of the visor of the swing, or, conversely, to make it contrast. Moreover, the coloring material has a direct influence on the level of dispersion of sunlight.

As a basis for the swings hanging from metal stands a wooden pergola

As a basis for the swings hanging from metal stands wood pergola

The finished product is to be securely fixed on the tarmac. When assembling the structure is carried out on the ground with high density, for fixing the frame can use several clamps, made of reinforcing rods. Preliminary it is necessary to sharpen the ends of the straps that will easily drive the rods into the ground 0.5 m.

As a fixture on the tarmac is better to use anchor bolts. They are set in advance in the appropriate places. After fastening of nuts, cut the excess thread grinder. In this design the construction is completed.

instagram viewer