Grouting tile joints can be done with their own hands
Content
- 1 Mix for grouting tile joints in bathroom
- 2 How to make grouting tile joints in the bathroom with their hands
- 3 How can aid in the tile grout joints in the bathroom video instructions
- 4 How to grout tile joints (video)
Mix for grouting tile joints in bathroom
Filling in the gaps between the tiles grouts not only gives a holistic view of the entire finished surface, but has a strictly unitary function. Grout prevents dirt to penetrate under the tile and prevents mold growth. Therefore, the correct choice of mixture not only affects the appearance, but also on the sanitary conditions of the room.
Related article:
What is the best glue for tiles? Varieties adhesives. Criteria for selection of adhesive, counting material flow rules tile mounting and surface preparation.
Before you make the grouting tiles in the bathroom with their hands, you need to choose the right mix. Regardless of the manufacturer all the mixture can be divided into 5 groups:
- on cement-sand base. It consists of white cement with the addition of fine sand. This type of mixes used in dry and warm areas. Clearly, for grouting tile joints in the bathroom, they will not work;
- cement with the addition polymers. Composed of cement and sand, but they added a polymer. This gives mixtures of water-repellent properties, making it possible to use in wet areas such as bathroom;
Flow Table trowel mixture in Example Kiilto Saumalaasti
Any of these groups allows for the use of mixtures of coloring additives. Dyes can be absolutely any color. When choosing a mix for grouting tile joints in the bathroom should pay attention that it is suitable for wet areas. Furthermore, mixtures are often designed for specific joint width. All the information with the characteristics of a particular material is available on the packaging, so it is a must-read before purchasing.
Grouting ceramic tiles in the bathroom using polutera
Useful advice!When choosing a grout for bathrooms, we must bear in mind its antifungal properties. The mixture does not possess them unsuitable for use in the bathroom.
How to make grouting tile joints in the bathroom with their hands
Vsestroitelno- repair activities begin to surface preparation and equipment. For grouting tile joints in the bathroom with their hands need the following tools:
- Bucket or any similar convenient container in which the mixture is blended.
- Pure water.
- Rubber and stainless steel flat spatula.
- Special gun, which simplifies the process of applying the mixture in the seams.
- A sponge or clean cloth.
After grouting the tiles is necessary to wash residue from a mixture of
Tools should not leave scratches and other marks on the tile. Before the start of major works to prepare the surface. To do this, you must remove the stitches from the excess glue and dirt, wipe the entire surface with a damp cloth, so that the seams were wet.
Useful advice!According to the instruction, the work of grouting must be carried out not earlier than after the lapse of days after laying tiles. Experienced builders recommend to do it in 7 days. In this case, the seams are not exactly affect shrinkage due to drying glue.
Epoxy grout
Breeding mixture for grouting tile joints in the bathroom is a responsible process. To do this, the dry powder from the bag is filled into a container and diluted with water according to the instructions printed on the packaging. Then, manually or with a mixer the mixture is stirred until homogeneous.
When this is done, you must wait 5 minutes and stir again mix. Now it is fit for use. Mixtures sold as a finished product, too, must be mixed. If you need color grout, the mixture was added the required amount of dye before mixing.
Grout and tile sealing joints in bathroom
Grouting produce a solution with a steel spatula or gun that is more convenient. Then the mixture with a rubber spatula leveled flush with the plane of the tile surface. When grouting is necessary to ensure that, to leave no gaps. After grouting all joints have to wait until the entire mixture will seize. After that, soft and completely wrung out sponge is necessary to make a circular motion over the surface, smoothing the seams.
You can not move the sponge along the seams, as this may result in leaching of grout. If defects are detected at this stage, they need to be eliminated, adding to the solution of the problem areas. After finishing this work must again wait for drying. After that, dry and polish with a clean cloth produce the entire surface, causing it to tselostnostnomu and finished form.
The circuit arrangement and movement of a rubber spatula with grouting
Useful advice!The bathroom has plumbing, which, in places of contact with the tile forms a gap. They need to plug sealant, plastic moldings, self-adhesive tapes or ceramic area.
Although it is very easy to understand in words, how is the tile grout joints in the bathroom, a video of the process can tell a lot about some of the nuances.
How can aid in the tile grout joints in the bathroom video instructions
Before starting work, it is necessary to thoroughly examine the process. The best thing in this matter will help to videos that are removed and spread out in free access a large number of people. You can find videos that explain step by step and show the entire work process of production. Moreover, remove them for any type grouts.
Deleting old seam, for example when replacing damaged tiles
Do not be afraid to start grouting tiles in the bathroom. Video of this process with detailed instructions you can see below.
