Decorative plaster with your hands, video and description

Run decorative plaster the walls with his own hands the power of each

How to prepare a decorative plaster with your hands, video and description of the process

Everybody wants to draw the walls of his house textured plaster, which is so popular today. Obstacle often is its price. For this reason, people always try to find a way to self-production of mixtures. It is noteworthy that today was able to try out some very successful recipes that can compete with the store. Moreover, there are recipes for both intrahouse finish, and for work outside the buildings.

Decorative plaster elegant look on the wall

We need a completely conventional components to prepare the composition for decorative plaster with your hands. Videos offered by the network, indicates a large amount of ingredients, but we confine ourselves to the following:

• Cement.
• Gypsum.
• Lime.
• Glass.
• Caulking.
• Silicone.
• Acrylic.
• Clay.

Sequence of layers in the preparation of the walls to spray the decoration layer

Bulking and texture in different mineral compositions should be added: sand, particles of various minerals, rock dust, shell rock and other solid elements. The polymeric compositions admixed synthetic fillers imparting coating drawing, like leather or suede or transmitting image wood or silk. When you add them stone powder can obtain a surface similar to natural rock.

The viscosity of the mixture and impart elasticity plasticizers, the most accessible of which is conventional PVA adhesive, known and easily accessible to everyone. All plaster mixture obtained has a white or gray color, so to impart color pigments and dyes are used, combined with a certain substrate.

Decorative plaster in the kitchen

Useful advice!It makes no sense to add the dye in mineral plaster formulations. They can be simple paint the top of any paint. This will allow more precise adjustment of hue.

All these components are sold in stores or materials are in natural conditions, where they only need to take and prepare properly. All material must be well dried and sieved. Lime and clay needed to rub through a viscous form prior to use. The solid particles must not exceed 3 mm in size.

Application of rough cast (video)

Recipes for the independent production of decorative plaster mixtures

recipe 1. To make simple decorative plaster with your hands, you do not need a video. You simply take the following ingredients in the indicated proportions and mixed with a mixer or a drill construction having a special nozzle for mixing solutions:

• Ordinary PVA glue in an amount of 800 g
• All known solution of 5% CMC - carboxymethyl cellulose powder, which was used as an adhesive for wallpaper. It should be 2 kg. Bred this component to a manual, which is available on the packaging.
• Soap, which is ground or rub then make him 10% solution. It should be uniform, like thick glue.
• chalk or gypsum powder in an amount of 6.5 kg.

Examples of various embodiments of plaster

The resulting composition is lined walls using techniques for applying decorative plaster, which will be described below. The big drawback of this recipe is that applied to the wall of the mixture has a large drying period.

recipe 2. Another simple recipe decorative plaster for interior work is based on the use of ordinary sand. Take 3 parts of washed river sand and sieved, 3 parts of gypsum with mineral additives (satengips) and 1 part with polymer additives (fugenfyuller), which will provide moisture resistance and durability of the resulting mixture. All components are mixed dry and only then dissolved with water and making the final batch.

Venetian plaster in the living room

recipe 3. To simulate textured coating can be made from a mixture of primers and satengipsa. The primer must be water-based and synthetic polymer which does not form a waterproof film. At first primer diluted with half the volume of water, and then was added to the dry satengips. Do it until a viscous paste-like mass. It should stand for a while, and then be re-stirred to remove air.

recipe 4. If you want to draw the wall in a damp environment, it is possible to make out the tiled glue decorative plaster with your hands. Video of this process is often found on the network. Clay is prepared according to a recipe that has on its packaging. Then simply applied to wall and draws any picture. With a wet brush texture can be smooth.

Instructions for mixing colors to obtain the desired hue plaster mix

Useful advice!A similar technique can be used for the decoration of the facade. Only in this case the adhesive is replaced by a conventional cement-sand mortar.

recipe 5. Facade mixture may be prepared on the basis of conventional cement and river sand. Adding lime to it is only permitted in dry areas. Sand fractions from Depth dependent billing of the obtained coating. For preparing such a solution will require one part of white Portland cement M400 and 3 parts of river sand. Produced stirring, whereupon the mixture is diluted with water to a consistency of sour cream. Decorative features of such a solution is achieved applying to the surface. Its just sprayed with a sprayer or brush dlinnoschetinistoy manually. Obtained coating resembling the surface coat.

Application of the plaster on the wall

Of all the recipes, probably the most famous is the recipe for the manufacture of decorative plaster with your hands out of the ordinary putty. About him a lot of talk, so let us consider it in more detail.

Decorative plaster with your hands from the usual fillers

It is a budget option self catered decorative plaster mix. For her, the following components are taken:

• Ordinary plaster. At the same time, by its very future depends on the texture of the coating. If only the relief that make strokes, it is enough to take a thin putty. For the structure in the form of strokes bark beetle needed coarse plaster.
• PVA glue or deep primer composition will give strength and elasticity. Take the plasticizer in an amount of from 2.5 to 6.5% by volume of the resulting mixture. The higher the percentage, the more durable coating, but will dry longer.

In order to achieve various relief pattern using special plaster rolls

To prepare the composition of all derivatives thoroughly stirred until the desired creamy consistency. Necessary to thicken the composition by the addition of fillers.

To learn how to properly put on the wall, prepared with his own hands from the usual decorative plaster putty, read on.

The technology of applying decorative plaster (video)

Application of rough cast their hands: Process video

Application homemade plaster trowel layer is made of 3 mm. After setting the top layer, yet pliable mixture was texturized using all possible scrap objects. To do this well suited crumpled polyethylene or paper, a sponge. If you want to get a large image, then use the pre-made stamps. So make the texture under a brick. You can use rubber rollers, which bear patterns. With the help of a small trowel, you can create a soft relief patterns swipe motions.

Methods for creating a pattern on the plaster using a roller and a paint stamp

There is another method of applying the plaster with his hands. Video of his application is well illustrated by how it succeeds. Covering done in several layers. The first layer is a background. He had no relief, just smooth. After drying it is polished and coated with a primer that improves adhesion of the next layer. It is already doing stencil. This layer is convex and represents a pattern having a volume. Often use floral motifs, grapes or geometric shapes.

Venetian plaster on the walls in the bathroom

Useful advice!Volume figures should not be raised above the background layer by more than 5 mm. This precaution will not crumble layer ahead of time.

About self-manufacture and application of decorative plaster with your hands a lot of video. They can be found and many other techniques to get beautiful texture.