The door to the bathroom and toilet: how to choose the best?

click fraud protection

How to choose a beautiful and practical bathroom door and toilet

Sliding wood door with glass insert in the bathroom

Content

  • 1 The door to the bathroom and toilet: Selection Criteria
  • 2 Doors for bathroom and toilet: material selection
    • 2.1 Doors made of fibreboard
    • 2.2 Doors made of chipboard
    • 2.3 MDF doors
    • 2.4 Wooden doors
    • 2.5 Metal-plastic and plastic doors
    • 2.6 Glass doors
  • 3 The door to the toilet and bath: photo, design selection
    • 3.1 traditional construction doors (hinged)
    • 3.2 Sliding doors (sliding doors)
    • 3.3 Folding doors
    • 3.4 roller doors

The door to the bathroom and toilet: Selection Criteria

Which door to put in the bathroom and toilet - the question is not as simple as it might seem at first glance. The traditional choice of users - use wood or materials on its basis for the doors to the bathroom and toilet. Photo WC interior, decorated tree, perhaps the most common in the repair and construction and design portals on the network.

When choosing the doors need to take into account the requirements sanitary requirements:

  • resistance nearly constant moisture and temperature changes during reception of a bath or shower use;
  • the ability to retain heat in the bathroom and provide good sound insulation;
  • convenience and ease of operation and maintenance of cleanliness.
The door to the bathroom should be resistant to moisture and temperature extremes

The door to the bathroom should be resistant to moisture and temperature extremes

Doors for bathroom and toilet: material selection

The Russian market offers a wide selection of interior doors, suitable for installation in bathrooms. They vary a lot in design, open type, material of manufacture and therefore cost.

Doors made of fibreboard

Fibreboard - fibreboard, also called hardboard. As with MDF, Fibreboard obtained from compacted sawdust dusty, but not dry, and steamed. Therefore hardboard thickness less than 7 mm, and the door frame are made of it. From a block of wood harvested frame corresponding to the size of the bathroom door and restroomAnd fix it with glue between two fiberboard.

Sliding door MDF - the cheapest way to install a toilet

Sliding door MDF - the cheapest way to install a toilet

Such a door can be trimmed by various methods: primed and painted, laminated, trimmed veneer or foil of polyvinylchloride, papered or paper tissue and covered with lacquer on top of them.

This is one of the most low-end door mounting options in the bathroom and toilet, but mechanical damage coating the ends lead to moisture and steam to the carcass, and eventually - the weakening design.

Doors made of chipboard

Chipboards (Particleboard) - a material made from wood chips or sawdust by dry pressing at high temperature and pressure. The binder in it working formaldehyde resins.

The door of laminated chipboard with mirror inserts in the bathroom

The door of the laminated chipboard with mirror inserts in the bathroom

This is one of the most widely used in the manufacture of furniture, decorative panels, door panels, etc. materials. It is characterized by ease of handling, durability, resistance to water and steam (in this case for areas with increased humidity have varieties with enhanced water resistance) and a good ability to hold various types of fasteners (nails, screws, and etc.).

Also made from laminated wood door to the bathroom and toilet - a cheap and affordable way to refine the space of a standard apartment: after using laminated door leaf is possible to simulate the natural structure of wood or other natural materials and implement a variety of colors solutions.

Tip! Must be distinguished from the laminated boards laminated. At almost the same cost of laminated fabric laminated inferior in durability.

Door chipboard has durability, resistance to water and steam, is easy to clean

Door chipboard has durability, resistance to water and steam, is easy to clean

However, the products of Particleboard there are also disadvantages. Firstly, their constituent formaldehyde resin is isolated in the air is not very healthy substance. Although there are types of chipboard or fibreboard, in which the emission parameters (evaporation) formaldehyde are low, should refrain from this material in a residential area (especially among residents have kids).

Tip! When choosing a door from DSP should pay attention to the marking material. In chipboard type E1 formaldehyde emission rate is significantly lower than that of E2. The letter B in the marking plate means increased water resistance. The upper limit of swelling in thickness in such a plate is 15% (for 24 hours).

White door with carvings and inlays frosted bathroom

White door with carvings and inlays frosted bathroom

Secondly, these plates are too hard, which severely limits their decorative effect. They practically do not lend themselves to fine processing: deep milling and thread.

Third, at the present time in Russia there is no production of flame retardant Particleboard, Which contain flame retardants. Fireproof plate foreign production will cost the consumer much more expensive.

A roller door of chipboard between the bedroom and bathroom

A roller door of chipboard between the bedroom and bathroom

MDF doors

MDF - reduction of the Russian translation of the English term Medium Density Fibreboard, ie finely-dispersed fraction. MDF made of very fine, almost dusty, sawdust, fastened lignin and paraffin, so MDF eco-friendly, soft, yet durable material.

Fact! Indicator formaldehyde emission from lignin and paraffin one of the lowest.

The facade of the cabinet and the door to the bathroom are made of MDF

The facade of the cabinet and the door to the bathroom are made of MDF

That softness has made it one of the favorite materials of modern specialists in interior design. He gives in to the most delicate handling, and has all the advantages of solid wood, with a durable, water resistant and cheap. MDF also have no such disadvantages of wood as an anisotropic properties and a tendency to crack.

Through this MDF is widely used for the production of furniture fronts, worktops, Products for finishes Interior: from wall panels and parquet boards to the relevant details - and, finally, the bathroom doors and toilets boxes.

MDF door is perfect for installation in the bathroom and toilet

MDF door is perfect for installation in the bathroom and toilet

Fact! Durability MDF higher strength chipboard 1,82-2 times.

However, there are two points of view on the use of MDF in wet areas. The first is that it is one of the most suitable materials. If you focus on the second - the doors of it suitable for bathrooms, for lack of the laminated layer on the rear side, which is why the door frame inflates within a few days of operation.

In addition, at the MDF there is one drawback - still the majority of products made from this material is supplied to the Russian market of foreign manufacturers, because their price for the end consumer It is high enough.

A door from MDF imported will cost a bit more expensive than other door models

A door from MDF imported will cost a bit more expensive than other door models

Wooden doors

Wood - a traditional material for interior parts such as door. Main tree property - to absorb moisture from the atmosphere saturated with water vapor, and give it in a dry atmosphere, contributing to the exchange of air. But as a result of these processes can lead doorframe.

Counteract this possible, using its mounting aperture in the mounting anchors and foam, as well as cover the wood durable lacquer, paint, wax or oiled. However Paint layer, oil or wax reduce or even nullify the ability of wood to "breathe."

To protect the wooden door from an excess of moisture, it is covered with varnish, paint or impregnated with a special oil

To protect the wooden door from an excess of moisture, it is covered with varnish, paint or impregnated with a special oil

Tip! Door premises with high humidity is best suitable wood solid wood: oak or beech.

Accordingly, if the intention is to put in the toilet and the bathroom door made of wood, it is necessary to pay special attention to ventilation. One of the ways to improve it - to make the ventilation air holes in the bottom of the door leaf.

Installing a bathroom in a wooden door, you need to take care of proper ventilation in the room

Installing a bathroom in a wooden door, you need to take care of proper ventilation in the room

Tip! To make an attractive appearance of wooden doors remained as long as possible, it is necessary to maintain the protective coating, gently caring for them. Alas, in most cases it will cost is not cheap.

Before varnishing or painting should also apply an antiseptic to protect against mold and mildew.

Bathroom, decorated in vintage style, are perfect doors of wood

Bathroom, decorated in vintage style, are perfect doors of wood

Metal-plastic and plastic doors

Based on the foregoing, it can be concluded that it is preferable instead of interior doors toilet and a bathroom made of wood or its derivatives use doors made of other materials, including artificial.

Metal-plastic or plastic door of the bathroom has several advantages:

  • durability - aluminum and plastics resistant to temperature changes, and its exposure to water vapor, not rot;
  • moisture - the shape and volume of the doors of these materials does not change from moisture;
  • ease of care - plastic does not require special tools for the care and effort in service. Suffice it to periodically wipe door sponge or cloth with a washing solution, supplementing it sometimes antiseptic;
  • diversity - with the help of modern decoration film pvc-doors can be given any color and structure.
Plastic door for the bathroom - the most optimal and practical solution

Plastic door for the bathroom - the most optimal and practical solution

Glass doors

Glass doors are an almost ideal solution, which door to be installed in the bathroom and toilet, but they have several drawbacks:

  • fragility. For safe operation of the doors even of thick glass, you need to cover them with foil surface is impact-resistant. It will also help to solve the problem of transparency - when using the tinting film;
  • condensation. The formation of condensation on the glass surface, which has a lower temperature than the temperature of the humid air in the bathroom, is inevitable. Draining the floor, condensate forms puddles, and dries to leave streaks on the glass and stains;
  • the complexity of care. Difficulties in caring for glass doors bathroom and toilet it creates condensation. We have to choose - or daily wipe the glass dry with or tolerate unattractive appearance of one of the main elements of an interior bathroom.
Double-leaf sliding doors of the blue frosted glass in the bathroom

Double-leaf sliding doors of the blue frosted glass in the bathroom

However, design photos glass doors to the bathroom and the toilet looked quite advantageous.

The door to the toilet and bath: photo, design selection

Often the choice of design and installation method door depends on its material, but there are universal solutions. Let us examine them below.

traditional construction doors (hinged)

In the apartments of the old plan bathroom often located so that its door was open, closes the outlet in the corridor or in the kitchen. However, in many cases, it makes no sense to give up the installation of swing doors, as the decision use a different design may result in the need to increase the width of the opening, and even redevelopment of dwellings.

Swing door in the bathroom dark wood

Swing door in the bathroom dark wood

Sliding doors (sliding doors)

Sliding doors to the bathroom and the toilet can be made of all these materials. With that setting door coupe leads to additional costs of material and time resources, it is one of the best design and constructional solutions.

The door-mounted toilet compartment with an upper metal guide

The door-mounted toilet compartment with an upper metal guide

Folding doors

Most folding doors (like "harmonic") Are made of plastic. They are lightweight and easy to use, require minimal maintenance and greatly release the space.

Related article:

skladnaya-mezhkomnatnaya-dver-knizhka-originalnyj-dizajn-1mFolding interior doors-book: the original design and space-saving. Design features, advantages and disadvantages. design options. Installation of doors-books.

roller doors

If the openings and the ceiling height allows, you can set a custom enough for dwelling construction - roll door. The material most commonly plastic or metal and plastic will be used.

Thus, there are several options for selecting and installing the door to the bathroom and toilet. Photos of the interiors should help the consumer to choose a final decision.

Creative solutions for bathrooms - setting the roto-doors that can be opened in both directions

Creative solutions for bathrooms - setting the roto-doors that can be opened in both directions

In addition to material and methods for installing doors are essential conditions for their operation. To prolong the life of the door leaf and the box needs ventilation. Help improve its ventilation holes in the door leaf, as well as gaps in the 1.5-2 cm above or below that you should consider picking up the door on the size.

instagram viewer