Ebb plinth foundation: features selection and Undermount

Ebb protect the base and foundation of the house from moisture

What are the tides for the plinth foundation

These devices always have the form of strips, similar to the ledge, the width of which varies from 50 to 400 mm. Planck is installed around the perimeter of the cap on the protruding part with a small 5 - 10 degree incline to the opposite side of the wall. This allows water to flow freely away from home, not getting to the foundation. Ebb for the cap of the foundation can be done independently of any waterproof materials, and can be purchased at the hardware store. Industry produces several types of them:

• plastic ebb;
• strips of galvanized steel, including painted and coated;
• aluminum and copper;
• concrete products;
• clinker plinth flow.

In order to correctly select the material you should be familiar with the properties of each detail.

Various colors of metal flashings

Ebb of polyvinyl chloride

In the construction of ventilated facades, coated vinyl sidingYou can stop your eyes on plastic plinth low tide. They are best in texture match the material used. Even the color can pick up, combined perfectly with the general background. Ebb and PVC prepared to order, so you can get any desired size and shape.

Long enough potential operating time as well as good resistance to impacts the external environment, such as climatic and mechanical, makes this material demand in the construction area. Plastic has completely watertight structure and of moderate cost.

Useful advice!Acquiring plastic flow, it should be borne in mind the fragility of low-cost models and the inability to make repairs. If the damage will have to replace the entire bar. Therefore, should choose the thicker and stronger products.

White plastic ebb for the foundation

Metal ebb plinth

In this segment, the article has a very large range of species. Lowest ebb for the cap of the foundation is made of galvanized steel, and the most expensive have a polymer coating. Some embodiments may have an exclusive view. At the same time, even in the production of the simplest metallic sheen of great importance is given to the aesthetic side. After all, this shelf is mounted on the facade of the building and should emphasize the line, creating the effect of completion of the whole picture.

Related article:

Effective insulation technology foundation Penoplex. Integrated insulation of the foundation of the building with the help of Penoplex plates. Three basic techniques for insulation of the foundation.

Outwardly metal tides are shelf having folds at the edges. One limb is made up, for fixing parts to a building wall or the frame of a ventilated facade. The second is directed downwards and is folded inside. This design does not allow the water, resulting in the phenomenon of capillarity, to return to the surface of the base. The length of the splines is often 2 m and a width of 5 to 30 cm, when the thickness of the steel sheet 0.5 - 1 cm. The colors may be completely absent or have absolutely any of the suggested one way or another manufacturer. The cost of these tides for n. m. starts from 1 USD and can reach for some models $ 10

Cap lined clinker bricks and supplemented outflow of metal

The main advantage of metallic strips for flashings is their aesthetic appearance, ease of installation and resistance to impact. Especially prized aluminum tides, which are much lighter and more durable than steel. Plating prevents metal to collapse decades. Brass ebb for the cap of the foundation today, few have lost their popularity due to the cost of a decent enough and needs constant careful care of them.

Install straps on a plinth carried out by means of their fastening with self-tapping screws or dowels directly to the walls of the building in the place of the upper limb, or to guide a ventilated facade. The process is not complicated and is performed by conventional hand tools.

Metal ebb for the cap of a wooden house foundation

Useful advice! overlapping at least 3 cm when installing plinth flashings must strips laid one behind the other. It is not necessary to trim extreme bar. It is better to cut off a part of its previous one. Crop damage the metal protective layer that sooner or later lead to corrosion and failure details.

Drips of concrete

For monumental buildings, decorated with brick or natural stone, it is preferable to use a concrete timetable for the foundation plinth. They have a solid appearance and guarantee the protection of the foundation of the house of any negative impact from the outside. For the manufacture of such cement flashings used M450. He is hardy and very high quality. The solution was added river sand and crushed granite. For better ductility and water resistance using plasticizers. Solution is poured into forms made of silicone, which may have different geometric parameters. The surface of finished products obtained is very smooth and level.

Installation instructions and tide starting to trim strips home vinyl siding: and - a general view; b - the outer corner; in - the interior angle; 1 - outside corner 2 - reflux; 3 - starting strip

standard forms or length of 3.9 to 6 m, and the width make the size of the cap. The color scheme quite extensive producers, but you can order an individual color. Concrete tides have excellent decorative properties, but their installation has to be provided by the draft in advance, as they are very massive. Tides are fastened on special solution.

Useful advice!Available ground tide of concrete can be painted any facade paint. This allows you to create a variety of design of the building facade.

Ebb of clinker

Often the house trim expensive and aesthetic material - ceramic tiles. This material perfectly protects the building from any influences from the external environment. It is logical to offer the foundation to protect these buildings with glints of the same material. They are produced by the construction industry, and they can be purchased in the same place, and ceramic tiles. Planning arrangement of the foundation in this kind of castings must be still in the design. Installing clinker tide requires high professionalism and attention.

Tide must be mounted before the decorative finishing the facade base

Despite this, many people choose this type of design of the building facade. After building, such material has a steering fundamental and thorough external appearance. He clearly emphasizes the social status of its owner.

The main stages of the tide ground installation

Setting the tide in its place is done before making the lining of the facade. tide material is selected such that it is combined with a building facade finishing material. To make the siding ebb plastic, under a brick and stone arrange concrete or clinker flow. Peaks of metal versatile and suitable for any kind of finishing material. Since most often used metal types ebbs mass individual building to protect the foundation of the house, a closer look at the features of their installation.

The socket tide with their own hands

On the called raft, horizontal surface of the cap put some planks along the wall. After aligning them fasten together the smallest screws. If the walls of the house are lined with bricks or made of light concrete blocks, pre-made holes for mounting tide with wooden or plastic plugs. Ebb screws attached to them. If the walls of wood or low tide should be attached to the front frame, the need to fasten directly to the screws. Joints between boards can be sealed in order to avoid contact with liquid therethrough.

Useful advice!Decoration of tides on the building corners use the special corners. They have a presentable appearance and sold together with the very planks of the same color and width.

Scheme dewatering installation on a concrete plinth

Using the timetable for the foundation plinth significantly increases its service life. In addition, the correct choice of the type of castings and quality installation greatly improves the appearance of the building, giving it the integrity and completeness.