Acrylic liner in the bath. customer Reviews

Acrylic liner in the bath. Reviews owners updated baths

In this article, we gathered the opinions of owners from all over our country, so that readers could understand and installation, operation and features acrylic liners. Real-world experience proves much better quality product than the standard description of products in stores.

Many residents of apartment buildings are familiar problems associated with the bath replaced. Signs that the old cast-iron tub inoperable:

• rusty stains;
• Numerous scratches;
• yellowed enamel;
• many scuffs.

"My wife asked for a long time to change this terrible monster, but could not muster the strength. It's a pile of dirt, debris, and even a million questions: how to make a 16-floor, where to take? Neighbor for six months stands near the garbage cans, do not take life. Apparently, very heavy. And here recently on the Internet I came across an ad: "Acrylic liners. Bath in the bathroom. " It turns out that this is a special insert in the bath made of acrylic. Old design does not need to make, the liner is installed directly into it and put on the glue. "

Mikhail Voronin, Kemerovo

Related article:

Acrylic bathtubs. Pros and cons of acrylic products.Subtleties selection and evaluation of quality of acrylic baths. Size range, the advantages of installing their own hands. Photo of acrylic bathtubs in the interior of the bathroom.

Here is a description from the site:

Modern bath liners are made of a special flexible plastic pretty topped acrylic. The lower plastic layer is able to withstand severe loads and the upper - acrylic responsible for the quality of consumer products. The thickness of the finished liner of about 0.6 cm, performed in any order of colors. Acrylic inserts do not require special care, easy to clean plain soap. When the scratches them very easy to update using a special repair kit and polishing.

"In general, we decided to try it. Gauging your bathroom, call the telephone number and two days later was taken to insert. Masters caught with the experience and did everything very carefully. A few hours later, everything was ready. We do not believe your eyes: instead of the old rusty, yellowed bath was brand new snow-white. And all this without the debris and long dismantling and finishing. "

Usoltsev Ivan, Ekaterinburg

Important! After mounting the liner to be filled with bath water to a level approximately 2 cm above the top hole. Under the influence of such a large mass of the insert lie down close to the foam, thereby adhering to high quality and reliable.

Acrylic insert bathtub in the bathroom

"Quite an interesting thing this insert. I have seen with an updated version of its neighbors - just beautiful, wanted to imagine the same. they are only slightly dissatisfied. They say that when water is taken a terrible rumble, as if the void under the bath. I sat down on the Internet to read the description of the installation process. There must be a reason of such a strange sound. It turns out that it all depends on the quality of installation.

Since the problem was not in the sack, I decided to update and your bathtub. I found a company that is engaged in the installation of acrylic liners in the bath. Feedback on the quality of their products and going to the house masters were only positive. Here we are, all done in a couple of hours. I am very satisfied. For two weeks I use a new bathroom that looks like it has just purchased. "

Oksanyuk Valery, Krasnodar

When properly installed, the master sanded with sandpaper enamel on old designs. It is necessary to insert more tightly stuck. After treatment on the purified bath is applied sealant. Them to pass on the edge around the perimeter and around the drain hole at the top and bottom. Rest of the surface is thoroughly filled with a special foam, and then install the insert and siphon.

If the foaming composition is applied is not everywhere and were sometimes gaps, when water falling from a crane will create an unpleasant sound. Also in the field passes the insert can start to crack.

Important! The correct choice of liner depends on the quality of future construction. To avoid mistakes, we must carefully carry out all measurements. Width and length is measured only in the bath, and the depth to be measured at the deepest point - a place plum.

Restoration of bathtubs with acrylic. Reviews owners acrylic liners

"Yes, acrylic inserts in the old baths have many advantages. But not everyone knows that they can be repaired. I'm such a contraption take about 3 years. Still scratched. The children railway car ride, the cat jumped over the fly. But the fact is that these lesions are easily removed by hand. Sell ​​special repair kits. Scratching is covered with liquid acrylic and then polished. 3 years my sack, and it is like new. All my friends were restored with acrylic bath. Only positive feedback. Everybody is happy. And acrylic liner keeps the temperature better than a bath of steel. "

Andrei Gusev, Penza

Important! To bath acrylic liner for a long time remained a wonderful decoration of the apartment, then in the care of her need to use a mild detergent containing no acid and alkali. Also it is impossible to use the cleaning agent containing abrasive particles.

Restoration of bathtubs with acrylic liquid. video process

"Our family decided to update the old worn cast-iron bath, I took a different path. Acrylic is not only solid, but also liquid. For a relatively small price professional cast iron cover your girlfriend a new layer, and it will be like new. For a year, the acrylic coating is kept in our bath, without causing any problems. We found a video of the process on the internet and decided to call a specialist.

Now tell us how it was done. Master first using a drill with a circular nozzle then removed all the old nipped enamel. Thoroughly washed of dust, solvent wiped. As he explained, it is necessary that the coating was kept better. After that, he started to design the processing liquid acrylic. After 3 hours of operation was completed. We did not use the bathroom for 2 more days until it dried up. Then we appreciated all the beauty of such a coating. Smooth, not rough, snow-white - it is still pleasing to the eye. By the way, the Internet is the video: the restoration of the bath liquid acrylic. Take a look and you'll see how simple it is to quickly and accurately. "

Family Pereverzev, Vladivostok

How to dismantle an acrylic liner

"There are times when he served for several years, acrylic liner has worn. It just so happens we have. I hang a shelf, and standing in the bathroom, I dropped the drill. The drill, which has not had time to stop for the flight, severely damaged the box. My wife and I were at a loss. Can I install the liner to the liner? Or otherwise restore the bursting of the box?

Call specialists, they have calmed down. The bursting of the liner is very easy to disassemble and put a new one. Experienced guys gently with a small circular saws notched acrylic layer in several places and removed it. Strip the old bath from foam sealant residues and put a new box. Now, I try not to drop more than a running drill. "

Vitaly Ozarevsky, Rostov

Of course, acrylic liner - thing is pretty convenient and practical. But nothing compares with this acrylic bathtub. Pros and cons, reviews of these products make it easy to choose and decide which bath will be better and last longer.

Repair acrylic bathtubs (video)