Chopper food waste is set to exit the kitchen sink
The operating principle of the chopper to sink
Flowing food waste (dispouzer) is a solid metal cylindrical body inside which is a crushing disc. The disc is rotated by a motor located in the lower part of the body. Considering the environment in which the device has to work, the disc is made of stainless steel which is characterized by increased resistance to corrosion. This means that the crushers sink is not afraid of any aggressive substances that may be encountered in the kitchen.
For safe and prolonged use of the chopper put in it only those wastes which are provided by the rules of operation
The process of grinding wastes is very simple. The camera device they enter the shell through the drain hole, and then under the influence of centrifugal force press against the drive cylinder walls and milled. For grinding is a special stationary float, attached to the inner walls of the device. From the shredder waste chamber by the draining pipe fall directly into the sewer.
Useful advice!Do not be afraid of what gets into the drain hole plug or spoon will break the device. The design of the chopper is arranged so that the motor is automatically turned off when it enters the solid object.
crusher design for food waste
As the switch can serve not only the usual push-button switch, but the chopper cover, which you just need to turn to turn on the device.
How to use the shredder
Use the chopper to sink very simple, but for the most effective and long-term work it is recommended to perform the following procedure:
- include water;
- include crushers;
- to direct the waste into the drain hole sink;
- turn off the shredder after the completion of his work, when the noise dies down comminuted waste;
- a short period of time, turn off the water.
Shredded waste, along with the water flow into the sewer removed
Also, there are some things that you should not do with the chopper, if you want it to be served as long as possible. This mainly affects the items that should not be thrown in dispouzer:
- Metal, glass and plastic. They simply can not be crushed, so avoid them falling into the drain hole.
- Plastic bags and other packing materials. It also includes rubber and other plastic materials, which are badly shredded. They are not ground properly and can clog the drain pipe.
- Thread, rope and hair. These materials can easily wrap around the motor shaft and cause its premature failure.
Socket for connecting dispouzera must be grounded and equipped with a moisture-proof
How to determine the dispouzera choice for the sink? This will be discussed further.
Features of the chopper selection
One of the main characteristics that are worth paying attention to when choosing a shredder for the kitchen sink - the engine power. This parameter directly depends not only on the unit price, but also its effectiveness. Also of great importance is the size of the housing. Than it is, the more waste passes through it per unit time. Some models may have additional features, the existence of which is also worth paying attention to when choosing dispouzera.
button to turn on the chopper is built into the countertop next to the kitchen sink
Useful advice!If you want to avoid the spread of bad smell from drain cleaning and prevent the growth of bacteria, then you should pay attention to dispouzery with a special anti-bacterial coating inside housing.
If you plan to buy a shredder the food waste to the sink, when selecting the model should pay attention to the number of modes. Some of these involve several speeds to maximize the grinding wastes of varying degrees of density.
Functional drawers with a hole in the middle leave room for cleaning equipment of food waste shredder
By the way, many of today's manufacturers also produce models with different numbers of nozzles. This greatly expands the range of waste that can be milled by the instrument.
The ideal option for food waste shredder sink, you can buy that for their home - a model with increased noise isolation, integrated automatic overload protection, the function of reverse rotation and special antibacterial coating inside.
For free movement of food waste into the sewer, when connecting dispouzera use pipes with smooth walls
Features installation dispouzera
Setting the grinder under the sink on their own without having to call the master is possible. Usually included with the device are all the necessary parts and engineering skills that are needed for installation, minimum. The main thing - to take into account a number of important points.
Firstly, the food waste shredder basin connected to the mains and is installed under the sink. This means that moisture can not be avoided. Socket for connecting the device must necessarily be grounded and protected from moisture.
chopper arrangement for food waste in the kitchen cupboard under the sink
Secondly, most grinders under the sink can be installed on the drain hole 90 mm in diameter. If the drain plug your sink does not meet this standard, it is necessary to increase.
Related article:
Siphon for sink with overflow. Subtleties choice and installation.Varieties siphons. The nuances in the selection of siphons for sinks with overflow. Components manufacturing, assembly characteristics.
And, thirdly, we should not be connected to the output of food waste down the drain bellows tube. Between its folds may remain waste, and this gives rise to unpleasant odor and bacterial growth. Therefore, better to give preference to the tube with smooth walls.
Structure dispouzera InSinkErator Evolution Septic Assist - sectional view
Installation Steps dispouzera
Install the appliance must be in accordance with the instructions, which is attached. If you do not have even a minimum of experience in working with plumbing, it is best to call for the installation of an experienced specialist. If you decide to self-assembly, then it should be done in the following order:
- disconnect from the sink drain pipe, carefully clean out all the components of the drainage system;
- Take a rubber gasket, which comes complete with dispouzerom, attach it under the sink flange;
- Further attach mounting bracket that is attached to dispouzeru to accede to the device itself;
Setting the grinder for food waste
- by means of special adapters attach to the chopper drain pipe, the other end thereof is connect to the drain;
- turn the unit to the mains.
Thereafter dispouzer is ready to use.
Useful advice!To chopper will last longer, a couple of times a year to clean it you must use a non-abrasive cleaner. As well help ice cubes, lemon peel and soda.
Dimensions food waste shredder STATUS PREMIUM 150
Chopper food waste basin: the best manufacturers
Now their dispouzerov model offers a huge number of companies that have proven themselves in the market of household appliances. Each of them has its own characteristics, advantages and disadvantages. How to choose a shredder the food waste to the sink that best suits your requirements, will review popular models from the best manufacturers:
- dispouzery Bone Crusher - differ from other models that are made not of metal but of a special durable plastic. One of the features of the shredder - a separate button for inclusion, which is mounted on the kitchen table. Price - 20 000 rubles;
- model Bosch-Siemens and Whirlpool - excellent grinders for household use, do well with any waste. Inner tubes have a special coating, whereby in your kitchen will never be a bad smell from the drain holes. Prices of food waste grinders for shells from these firms is higher than that of other manufacturers, but they are worth. The average price - 200-300 USD;
Lineup dispouzerov InSinkErator
On the internet on different models for the sink food waste shredders reviews can be found is also very different. Some people prefer the brands tested, and for the sake of the well-known brand, he is ready to turn a blind eye to the shortcomings dispouzera. And some prefer not to brand, but more economical and functional models. In any case, should choose, based on their wash parameters, features and reliability of the manufacturer.
Useful advice!Regardless of the model, pay attention to packaging dispouzera. It must include special keys, rubber gaskets, fastening mechanisms, exhaust outlet and a pneumatic hose with pnevmoknopkoy if it is by design.
Choosing the right model dispouzera, take into account the dimensions of your sink
Rates shredder waste basin may vary in a very wide range. It depends on the well-known manufacturers, engine power, number of operating modes and other nuances. Sometimes it's better to overpay, but take a better model that will serve you faithfully for decades.
For a more accurate and efficient installation on the Internet service grinders there are a large number of video clips, which greatly simplify the task.
