Is it possible to lay laminate laminate: how to upgrade the old paint

The old may serve as a base floor laying laminate

Is it possible to lay laminate laminate?

Explicit prohibition, which would argue that putting laminate laminates can not - no. However, in order to understand all the difficulties you might have to face, let us remember the basic requirements for laying laminate on the floor:

• surface, which serves as a basis for laying laminated panels, should be as smooth. If the height differences are permitted and, only in the range of 1-2 mm per square meter;
• qualitative substrate with good sound and heat insulation properties - a prerequisite laying laminate;
• protection from the appearance of the fungus in the joints can provide only the treatment of special antiseptic.

New laminate flooring can be laid on top of the old only with the use of the substrate

If you decide to lay laminate over the old laminate it is possible to meet all these requirements? Yes, provided that the old paint that is left from the bottom, there is still quite good, has no visible failures, damage to locks and panels, the emergence of foci of the fungus. In this case ceases question: why then lay a new cover?

It all depends on your wishes. Perhaps you simply want to refresh your interior. But, in any case, if the old laminate does not meet at least one of the requirements put forward - coating must be dismantled. Otherwise, very soon will come into disrepair, both the laminate layer.

The process of stacking the laminate SSB

Can I put laminate laminate and how to do it

It is obvious that if we put a new layer laminate in the same way that the old paint has been laid, all the irregularities, imperfections and distortions are not smoothed, but only contrary increase. Accordingly, the coating will be unreliable, or as it is called - "play". In order to maximize this effect is smooth, it is recommended laying of panels in a direction perpendicular to the old. Here it is best to see the video tutorial: how to lay laminate flooring over other coating.

Naturally, the implementation of such works, first of all, have a negative impact on the height of the room. After each new layer of coating raises the floor, which can be a serious obstacle in small apartments. But if the ceiling height in your home allow such expenditures space, based on a full assessment the old state of the laminate, you can decide on its suitability for use as a base.

Tools not only need to laying laminateBut also for preparatory works

Useful advice!Apart from assessing the quality of the coating itself, it is useful to assure the integrity of the substrate. From its state will largely depend on the further cover functionality.

It is important to understand that all of the above recommendations can be used only if it is a laminate with a locking connection. It is obvious that once planted on the panel adhesive, check the condition of the substrate without dismantling the old floor would be impossible. Therefore, in such cases use different technology: paving another layer of heat and waterproofing material between the new and old laminate. This is the only way to provide yourself a quality flooring. Of course, subject to the good state of the lower layer.

When laying laminate should follow some safety rules

Stacking another layer using an adhesive attachment method, you will have to take care also of the fact that two layer coating must be reliably separated from each other. This will entail additional costs, however, other ways to solve this issue simply does not exist.

Related article:

What a substrate under a laminate better views, features and specifications.Criteria for the choice of material. Variety of substrates. How to instal their own hands. Ranking the top 5 manufacturers.

Is it possible to lay laminate laminate without support? You can not. Between the layers necessary quality material must be laid, which will be able to fill the void, formed between panels, and create additional insulation.

Detailed scheme of the original laying laminate

How to lay laminate flooring

If the old coating meets all the requirements imposed to the base for a new laminate has no irregularities, defects and damages, in most cases, laying the top layer will differ little from the conventional technology installation.

Usually laying laminate produce, starting from the location of the windows in the room. Sunlight should fall parallel to the seams and window openings should be perpendicular to the panels. Such a method is considered to be the most simple and convenient. But what if you have to stack a second layer? Where to begin laying the laminate in this case?

laminate stacking technology in the room

In what direction lay laminate - depends primarily on the source data that are already available. The question is how to lay laminate flooring: along or transversely with respect to the original cover, never a matter of controversy. All the experts as one, agree that the direction of stacking of the two layers should be different. This will help to compensate for existing irregularities and the most evenly distribute the loads over the entire surface.

Useful advice!Before laying laminate along or across the room, turn your attention to the fact, like putting laminate diagonally. Such a method, though more difficult to install, but it looks great and is well suited for combining layers.

Laminate, designed as a massive wooden board

Whether it is possible to dye coating laminated

Another option to rehabilitate the old laminate that can not hold you in their appearance - to repaint it a different color. Is it possible to paint a laminate? Yes, you can, that's just it should be done taking into account some features of this material. You can not just pick up a brush and using floor paint to update the old panel. Consider how you can return to it an attractive appearance and does not degrade its performance.

Everyone knows that the main disadvantage of laminate - water permeability. And it's the first thing that will have to be considered in the process of painting surface. The structure of panels arranged in such a way that when there is water on the surface, it rapidly absorbs it enough. This has a very negative effect on the laminate itself. To avoid this, when you start to apply the paint, it is necessary to choose the right material.

Antic laminated coating can be updated using staining

The most appropriate paint for the laminate is considered to be alkyd or polyurethane compounds. Due to its ability to form a film on the surface, they are better than others are suitable for use in such cases. However, even before the work is necessary to check the compatibility of the natural protective layer of paint panels and components.

Useful advice!The film formed on the laminate surface by staining should be wear-resistant. Otherwise, it just obderet soon under the influence of mechanical factors.

The most suitable for laminate - a polyurethane and alkyd compounds

The first thing you need to start preparing the old coating for painting - the perfect cleaning of the surface of various kinds of dust and small debris. It is necessary to ensure that in the process of sanding leave no damage or scratches. Why you need to grind the surface? This is a required step of which provides qualitative ink adhesion with the laminate and prevents its slipping one further layer. So skip this step is not recommended.

When the sanding process is completed, you will have yet another maid. Remove all dust formed on the surface with a damp sponge and allow the surface to dry completely.

Purification was carried out laminate surface with a soft cloth

Useful advice!To protect the walls from possible contamination drops of paint, using a construction adhesive tape.

When the surface of the floor is completely clean and dry, you can begin priming. It is best to use a solution of an oil-based. Causing uniform layer, wait until it dries. Then you can start to paint. To fix the paint, experts recommend use a polyurethane sealant, causing it evenly on the entire surface.

Is it possible to cover the laminate varnish

Laminate It considered relatively resistant coating, when it comes to the impact of various kinds of mechanical factors. However, over time the scratches still appear, no matter how you tried. Therefore, to avoid the like, it has been tested in practice protection method comprising applying a lacquer to the laminate. We will try to find out how effective this method is, and whether to use it in their home.

After varnishing laminate will look brighter and smoother

From all this we can conclude that the laminate can be lacquered, but only if it was placed perfectly smooth and even.

Important role played by the choice of proper varnish. Do not expect that you will be able to use a conventional structure, which is recommended to cover the wooden floor. It is better to choose an option on the basis of polyurethane or acrylic. But there are options that are designed specifically for laminate. Their composition is reliably strengthens the surface, preventing scratches and damage.

Preparation for the application of lacquer to the laminate is very similar to advice on color. The result of your work - clean, dry and smooth surface. Producing unacceptable surface sweep using skins. Yes, and other ways of processing of wood not suitable for laminate flooring. All that you can do - to use a special paste, which will help hide the visible surface defects.

Coverage of laminated boards with a special varnish

Directly varnish should be applied using a wide soft brush or special roller. Better to start from the corner of the room, gradually moving toward the exit. Deposited layer will dry very quickly, so try to act clearly, avoiding errors.

Thus, all of the above accurately answer the question of whether it is possible to lay laminate laminate? C substrate - possible. In addition, there are many other options for updating the laminate flooring. Laminate flooring can be painted or varnished, and thus significantly reduce repair costs.