Ceiling tiles for the kitchen: the repair of the ceiling with his hands, and photos

Kitchen - is a special room that is daily experiencing the aggressive influence of hot steam, grease, grime. Approaching its finish, should be very carefully selected lining materials. Preference should be given to such samples, which are easy to clean and are not afraid of moisture and have a nice design. Using ceiling tiles for the kitchen, you can significantly transform the interior, make it easy and unobtrusive. In addition, this method of decoration does not require a large expenditure of money.

Features material

Such repairs are considered perfect choice for kitchens with low ceilings. As a result, valuable centimeters square will not be "eaten", and the surface will be accurate and solid. Therefore, such coatings are often used for finishing Khrushchev.

tile advantages:

• low cost;
• Easy to install;
• protection against external aggressions;
• diversion of moisture, prevents the growth of the fungus;
• surface staining in any color;
• freedom from minor defects underlying base;
• It does not require special care conditions.

Recommendation! High humidity serves as the basis for finishing ceiling tile special laminated simulating any natural material surface.

This coating is graphically represented in the photo.

Varieties ceiling tiles

In the manufacture of the material used is polyurethane foam and expanded polystyrene. Coverage of the first type characterized by such characteristics as light weight, stable density and color consistency.

Polystyrene materials are used most frequently - they are distinguished by a low price, have a white color and special laminated coating. Such a surface can be easily colored with water-based paint in any color and is selected according to the interior decoration. These samples are considered to be a perfect option for finishing Khrushchev: low kitchen does not allow you to set sophisticated design, significantly reducing the level of the ceiling. Some embodiments of the pattern shown in the picture below.

tiles plasticity allows successfully mask the defects, pasting it on the uneven surface, the basic foundation does not require its prior purification. If it becomes necessary, the material is easy to cut well sharpened knife - tile structure allows it.

To repair the ceiling of the founding of significant differences is inappropriate - in this case, the surface must be pre-plastered.

Technology pasting ceiling tiles

preliminary work

ceiling repairs carried out on a simple scheme: to begin with a basic foundation cleaned of flaking paint and plaster ordinary trowel or hammer. The outer layer is degreased nitrosolvent. We should not forget about the processing of the prepared base by special anti-fungal composition. In any means, the main component of which is chloro can be used as a counterpart.

Then the surface is primed by brush leveling compound is treated in a PVA glue. It penetrates well into any slot, filling it with the desired composition. Deep unevenness processed gypsum putty, and once the applied layer is dry, tiling is performed.

finishing process

All work on the design of the ceiling can be made with your own hands. The main guideline in such design becomes a straight wall. Insufficient its flatness requires the use of the diagonal technique. Finishing the ceiling tiles zone is very expensive material, this fact should be taken into account when buying.

Repair begins with marking of ceiling areas: take the fishing line and stretched along the wall. Another cord is fixed at a flexible angle nearby overlap. Located middle, then the end of the first rope are moved so that they form a right angle. Small gaps are covered with a decorative baguette.

To ceiling acquired aesthetic characteristics, often work starts from the corner, opposite the entrance. This part is most visible when it enters the room.

All activities on the tiles with their hands pasting reduce to finding the center of the ceiling. How to find it, pulling on the line from opposite corners - the point of intersection and is the middle. Adhesive is distributed uniformly on the reverse side of the tiles, advantageously at the corners and center, square hands pressed to the designated point.

Defined laying subsequent repair material along spaced perpendicular lines. A reference point for bonding these plates will be stacked elements previously (see. Photo).

Features a seamless bonding of ceiling tiles

Laying of the material is carried out by a special technique, with his own hands. As a result, the joints are almost invisible.

1. Operations start, as in the previous case, with the alignment of the base and base treatment with primer surface.
2. Further repairs associated with the application of markup and applying the material on the marked lines. For this is the middle of a tape, and held 2 intersecting lines.
3. Special quick-drying glue droplets distributed on the perimeter of the square in compliance with a distance of 10 cm. As soon as the tool starts to dry, it is possible to carry out further repairs.
4. After 3 minutes tile is applied to the ceiling surface, the corners should coincide with the reference lines. During operation, it is important to be careful: the brittle material does not tolerate abuse.
5. A subsequent repair is associated with fixing their appropriate parts. tiles connection points with the walls are carefully measured and added to the cut portion of the material here.
6. Finally, the seams are treated filler and the surface is covered with water-based paint. However, this option is not mandatory and may be omitted if desired.

Thus, the design of the ceiling tiles is considered one of the most inexpensive and basic methods of decoration. Enlisting the most basic set of tools and their own patience, it is possible to hold the ceiling finish, and design photos on the Internet to help find inspiration and choose the appropriate option easily. Such a coating will last a long time, pleasing simplicity and uncomplicated ornament coating perfection.