Water treatment - a hot topic for many families. But to bring back to normal all incoming cubic meters is not enough neither the money nor the patience. It is much easier to filter the water that is needed directly for drinking and cooking, and the rest used as for other technical needs. This may well help a separately mounted valve for drinking water. It should be a time to spend, to find time for simple installation - and you can easily get from the mixer clean filtered water around the clock.
Content
- Types and apparatus
- A variety of filters
- mechanical filter
- reverse osmosis system
- mineralizer
- Mounting
- selection rules
- manufacturers
- Zorg Sanitary (Czech Republic)
- Zorg Inox Fontas SZR-1339
- ZR401KF
- Kaiser (Germany)
Types and apparatus
When the kitchen has been renovated and equipped with, it is difficult to find a way to install a separate mixer. Cutting the countertop or the sink is not very desirable. In this case, you can simply replace the existing equipment, and in its place establish a model in which the individual or combined Spouts provided.
By type of shut-off valves are under the filter taps are divided into types:
- Lever - a fairly common design where a lever is provided for each of the spout. Such models are inexpensive, but in everyday life to enjoy them is not very convenient. However, if no choice, it is better to take mixer tap additional lateral location. Then levers Spouts and will not interfere with each other.
- Dual or combined mixers under the filter has only one spout and switched to drinking water supply via the tap-axlebox. Their gates responsive to adjusting the flow, and the technique much more ergonomic, but is much more expensive models joystick.
Despite some inconvenience the use of binary systems are very popular. The reason - the ease of installation and relatively low price.
Combined mixer under the filter pipe allows one to obtain a purified and ordinary running water. A huge plus of such structures is that each thread has its own channel. That is, the drinking water will not be mixed with unpurified tap because each supplied by a separate circuit. Valve combination faucet filter kitchen only redirects flow from the common pipe: a built-in purifying filter through or past it.
Interesting Mixer for kitchen with connection to the water filter and a mineralizer. This is quite rare chetyrehkonturnye system that serves two kinds of technical (hot / cold) and two kinds of drinking water - further purified or enriched nutrients. But cheaper to take a simpler trehkonturnik, and to bring him already Reverse osmosis systemCoupled with a mineralizer.
A variety of filters
Although the final product put forward simple requirements - water must be safe and suitable for drinking, filter options are not so little. They guarantee approximately the same degree of purification, but operate each in its own way.
mechanical filter
The most simple in execution unit that can be connected as a combined crane and to the imposition. Flow filter, i.e., has no storage tank and delivers drinking water without restrictions on volume. It comes with a few cartridges that time should be changed (usually there are only 2-4 pieces) from time to time. From the mixer for kitchen connecting to filter such a sample obtained water purified by compounds chlorine, minerals, chemical contaminants and debris exfoliated plumbing pathogenic germs.
reverse osmosis system
An interesting and effective way of "forcing" of water through the semipermeable membrane, realized in such kitchen faucet filter, slightly increases the cost. But without any chemical reagents purifies tap water from the smallest litter, bacteria and even some solutes. A thin film of water passes through it at a molecular level and delaying sending the drains all larger 10-5 um. Equipped with such systems not only cartridges with the finest membranes, but also hoses, allowing easy connection of mixers under the filter.
mineralizer
Such systems themselves does not make sense to apply - untreated drinking water and so clogged various mineral salts questionable properties. Another thing is that after the osmotic treatment, she loses all any supplements, is almost turning into a useless distillate. To restore the salt balance in the body, doctors recommend drinking water containing minerals, but only really useful. So to a mixer for kitchen reverse osmosis filter often install an additional block mineralizer. Besides, it works as a pH adjuster adjusting the acidity decreased to normal osmotic water.
Mounting
Kitchen mixers with a tap for drinking water connected to a cold water pipe branch under the sink. That is, the two hoses technical supply through an adapter is added one more - in communication with the filter. And that in turn has its output to a mixer to a different channel in the spout.
A filter assembly often involves an additional connection to the sewer pipe through which removes sediment and other particles arrested. The shell itself is securely attached to the side wall of stone, but first it must be connected to all hoses.
Further procedure works like this:
- Shut off the water supply valve common to the apartment and go down the possibility of the remains through the open kitchen faucet.
- Detach from the "cold" duct main mixer hose and install the adapter with additional tap of the filter.
- Assembled and fixed purification unit connected to the adapter.
- Set on a sink faucet under the filter and connect a hose to the outlet-dropper.
- Make release into the sewer if the filter design of the equipment is provided.
- Open common cold water valve and check the tightness of all connections.
When installing kitchen faucet filter on the sink must maintain a distance not less than 200 mm from its edge. in the cabinet itself cleaning unit under the sink is placed as close as possible to the tap, but so that the connection hoses are not twisted or bent. And do not forget to seal all screw connection with PTFE tape.
selection rules
The cost of mixers with filter kitchen can hardly be called democratic, so buy it, just focusing on the exterior, it is a mistake. First of all do not have to choose the design and manufacture of the crane material. Are considered reliable stainless steel, bronze, brass, copper. Ceramics and thick plastic though belong to different price categories equally short-lived compared to non-corrosive metals. They can compete unless the black steel, so it is usually used for the manufacture of internal mixer parts.
Plastic, for example, is highly resistant to corrosion. Here are only a few taps for kitchen under the influence of the filter do not feel - it is sufficient corrosion resistance. But in combined systems, this property will be very useful. Brittle Ceramics appropriate in the locking assembly, as the ball of it in contact with a steel water lasts longer.
The shape and shade of the mixer is better to choose a general idea of the kitchen interior. But the outer coating is still preferable frosted - it is not so smudges and streaks, which means that the crane does not have to be regularly cleaned to a shine.
A few tips:
- Very well, if your kitchen faucet with filter cartridges provides status indication. Thanks to her, you'll know when it's time to replace it.
- Location control valves is better to try his hand under the principle comfortable / uncomfortable.
- The spout height is selected according to the depth of the kitchen sink - than it is smaller, the higher must be the crane.
- You can select a rotary model, if it is necessary during operation, push the spout to the side, out of the way.
manufacturers
We have considered all the basic nuances of the mixer of choice for kitchens with a filter. But experience shows that its durability depends on the manufacturer. Since this technique is initially cheap, attempt to save when buying will only lead to one thing - after a short time you will have to completely replace the failed valve.
We will present a few expensive, but high-quality models kitchen faucet with filter production of two respected European brands.
Zorg Sanitary (Czech Republic)
Most of Zorg models are combined, that is, looks like a single tap, but have a separate channel in the spout for drinking water. A big plus of Czech mixers - their versatility. They can be connected to any types of filters without additional adapters.
Zorg Inox Fontas SZR-1339
Single lever kitchen faucet filter is released under the series of "chopped" square models Czech company due to the rounded shape of the spout. A sort of classic tap brushed stainless steel, but with a water feed switch on the filter. Shut-off valve has a smooth ride, particularly for buyers praise turning Fontas. Flexible connection is convenient to install, but not too durable, and every few years will require replacement.
ZR401KF
An interesting series of Zorg - the so-called "Granite" under the filter taps. For example, one of the models really ZR401KF outwardly looks as if made of polished stone. In fact, the material for the production of this original line served as the brass, and the similarities with the granite gives it a decorative powder coating.
The crane also has a combined ZR401KF performance and controlled swivel arm, mounted on top. To put it in a filing filtered water mode, you need only turn the knob on the end of the spout. Installation is performed using a rigid liner, and requires some skill when connected. But this supply line will be as durable, as does the kitchen faucet under the filter.
Kaiser (Germany)
At Kaiser looks similar models are more expensive, but the design and the choice is much wider than that of the Czech company. However, diversity is achieved mainly due to cranes classical form, although there are original models.
For example, vintage kitchen faucet with a switch for drinking water Kaiser Vincent brass - coated color newcomer or antique bronze. Combined swivel spout has lateral Single lever control for supplying service water and filtered on switching.
Models with the upper arm at the Kaiser to be not so elegant, and whole, like Sorge, but the quality remains high. However, anyone under the kitchen faucet filter with such a design will be absolutely reliable thanks to ceramic cartridge.
One example is a low brass faucet with a separate feed of filtered water Kaiser Safira Antiq 15066. Such a model will last a really long time. The spout is equipped with an aerator, a control flow at any pressure. Although a bit confused by the location of the switch drinking channel under the tap - a decision not all seem friendly.