Grease trap under the sink: the installation of household grease trap with his own hands

The problem of blockages in the kitchen anyway faced each. Not for nothing on TV every day talking about the domestic advertising agent, capable of unclogging sewer pipes for a few seconds. However, not many people think that there are devices that can once and for all get rid of the blockages - grease trap under the sink. That fat is the main cause of stagnation. If you remove the pipes after several years of operation, we can see that the oil deposits of "eat" half of the inner diameter and no chemistry is not able to dissolve such a layer. When installing the grease trap stops deposition of fat particles in the pipes, thereby increasing the service life sewage and eliminates blockages.

Principle of operation

Grease trap under the sink - a device that separates the entering thereinto after washing liquid on the fat and water. The simplest models consist of container and two partitions: the first comes from the top, leaving the bottom of the gap, the second - from the bottom up to a third or half of the tank. Water, entered from the shell falls into the first compartment, and then proceeds further under the first partition.

The share of fat is less than that of water, so it floats and does not sink and does not flow further. After the first partition wall of the water rises and flows in the second sewer pipe already treated.

Partitions in the apparatus operate once 2 functions: delay fat and large debris which accumulates on the bottom of the first compartment. Periodically grease trap under the sink is opened and mechanically remove the top layer of accumulated fat.

How to make their own grease trap?

Since the construction of the device is simple enough, it is quite possible to make their own hands. For this purpose, suitable box for toys, large plastic kit with a lid or an old canister. First we need to do in the upper part of the side walls of the hole, put in it L-shaped pipe for adding the mixture and seal the connection. Then, by hand, using Thermo attached two partitions on a small distance from each other.

Only the lower partition can confine if desired, be upsetting debris. A few centimeters below the level set input pipe connection for the withdrawal of purified liquid, just make a hole in the sidewall and seal it. Nozzle for output taken T-shaped, one end of it is lowered down, without leading to the reservoir of the day a few centimeters, the other raised up above the water level. Cover the lid on the container, leaving a ventilation gap. All grease separator installed his own hands, I am ready.

How to choose?

If you do not want to design a grease separator with his own hands, it can be purchased at the store or ordered online. The truth is it is not cheap, despite the simplicity of the device. When you purchase is necessary to pay attention to the body material, capacity and design.

Grease trap under the sink may be made of:

1. Plastic. Easy, cheap and durable material that can be cleaned without difficulty. Models made of plastic are the most popular in part because the manufacturer can design the device taking into account the specific requirements of the customer to the shape and size.
2. Fiberglass. Grease Sewer fiberglass usually used catering facilities. This material is characterized by increased resistance to adverse environmental conditions (heat, cold, high humidity), and long lifetime.
3. Of stainless steel. Durable material (as opposed to plastic, it will not hurt a random bump or fall), durable but expensive.

Defining capacitance device must start from such parameters as peak reset. This amount of water that can pass through itself household grease trap under the sink at a time.

Peak discharge for businesses determined by the formula: volume of water is placed in a sink, multiplied by number of washes. For standard apartments, this parameter will be equal to the volume of the kitchen sink. In other words, if the wash water to fill to the brim and uncorking drainer, grease trap has to cope with the received stream of water. fit model with a peak discharge of 30-40 liters for most standard flats.

Kitchen grease may differ not only in volume but also in design. For example, the containers have a removable grease collection or consist of several sections to improve purification. The more complex the structure of grease trap under the sink, the higher its value.

(32 estimates mean: 4,28 of 5)

Loading...