Characteristics of a two-stroke voltage converter

click fraud protection

How the two-stroke

works The nominal voltage of the resistor can be in the region of 220 Ohm and up to one kilo, with the help of the nominal energy it is easy to carry out the frequency adjustment of the unit. The strength of the resistors is mostly about 0.6-1 watts, they can overheat, but it absolutely does not work at all negatively.

The main points on which the two-stroke installation works:

  1. In the beginning, in a certain sequence, all transistors are opened and closed, with which a current of high voltage is discharged in the transformer electrical installation, more precisely in its winding.
  2. Transformat begins to wind on a ring, yellow, which consists of a computer-powered unit, but some employ certain brands of rings.

    Winding on the rings of this unit

  3. The primary winding of the unit includes six turns of winding, with a certain branch from the center, the length of the cord is about 0.5-1 millimeter. The secondary electric winding includes 90 turns, that is, it spreads out along the entire contour of the ring, the insulation wire can be omitted, but only if the primary winding is made of a stranded cord. It already contains insulation.

Secondary and primary winding

The power and power of the converter installation can be up to twenty watts, if field-type transistors are used. Apply it in so many areas, since this unit can produce good power and in itself it is very compact addition. Most often it is used to quickly charge the capacitor, to power some units that do not have a network connection.

How the converter unit works without an electrical transformer

To make the voltage rise only a few times, you can use a circuit without a transformer installation, you can use a multiplier. And if the oscillator generator is already turned on in the device, of course, it is symmetrical, then the transistor is used to provide power and the voltage should be several times higher.

Transformer without transformer installation

The voltage itself comes to the multiplier, it works in a serial form with a supply voltage source. This installation is less expensive, and not so dangerous to health. But also it is not suitable for all uses, as already mentioned, to increase the voltage by only a small amount.

instagram viewer