Hauling furniture with his own hands: video repair soft kitchen sofa

Regardless of the quality of the coating of sofas and armchairs, sooner or later lose their former interior brightness and beauty, and the springs subside. To return to its former shape this indispensable piece of furniture made hauling furniture with his own hands. What are the advantages of self trim? Of course, substantial budget savings, the acquisition of skills for the Treatment of furniture fabric, develop accuracy and dedication.

The list of permissible upholstery

Getting to work, it is important to remember that the patterns require costly professional finish, so not to spoil the sofa inept actions, it is desirable to refer to the restorer. It is also easy to replace the upholstery quilted surfaces decorated with all kinds of upholstery elements, notches and pleats. A novice in such matters is better to postpone the idea of ​​reconstruction, and to gain experience and can be more simple models.

Implement hauling furniture allow the following materials:

• dense and strong skin substitute;
• synthetic or natural fabric impregnated with water-repellent composition;
• special foam hardness with the corresponding «EL» marking.

Choose the upholstery should be so that it was combined with a common room and finish of the furniture.

In some cases, a combination of all kinds of fabrics allowed. Most often used for the upholstery of the tapestry, flock, nubuck, jacquard, leather.

Tools required for work

Set the following tools will allow to work very quickly and smoothly:

• Phillips screwdriver, a flathead screwdriver tools;
• Allen key;
• Cutters;
• Stapler furniture;
• glue;
• hammer;
• pliers;
• nails with classic and hats;
• everything you need for filing tissue.

How to avoid mistakes when choosing fabrics?

Worn furniture requires careful selection of the material. Not only did he transform its appearance, but also become a practical product. It is advisable to buy a special upholstery fabrics, devoid of roughness and relief with a high percentage of synthetic fillers. Location on the couch so hardly anyone will like, so when choosing a fabric, it is important to take into account the nuances of the following:

1. Matter with a pungent smell better pass by. It is also worth to give up coloring fabrics.
2. Among the hairy covering is best to choose those that have the highest strength and does not crumble.
3. Dense tissue cleverly hide all the flaws the waist, it is important to correctly attach picture, just watching his match.

Recommendation! When choosing fabric for upholstery, do not focus on her fashion statement, an important consideration when selecting a general correspondence should be room environment and personal comfort of use.

Soft base of foam is required to be porous and elastic, with fine bubbles, this material should quickly take initial shape. By purchasing to mitigate surface sintepon, it is important to pay attention to its quality: the surface is required to be uniform in thickness, density and structure.

The main points of installation

Self-restoration of sofas and chairs are not in need of complex and curved patterns. Avoid patchwork allow the acquisition of matter with a stock.

Advice:

• Before starting work, it is desirable to work out on the chairs that will strengthen the skills of handling cloth, allow to choose the most convenient tools and master all the stages of a difficult repair.
• Before removing the old fabric is desired to photograph the main fastening elements pivotal point connecting parts. Final assembly takes place in the order in which it is dismantled.

Restoration of soft furniture in the following order:

1. dismantling the side portions of the back, legs and pillows;
2. dismantling of worn parts;
3. removal of measures, preparation and cutting of new elements;
4. fastening parts upholstery;
5. installation of the finished machine.

Terms of reconstruction of sofas and armchairs

All work on the waist obsolete structures begin with the dismantling of: removing the side parts, seat, hands and feet.

recommendations:

• To prevent damage to the frame, it is important to observe caution.
• Rusted elements is first treated with a special liquid, and then gently removed.
• Get rid of the old staples can be hooking plywood screwdriver and gently lifting it. After loosening them easily removed.
• Screws twisting, but not pulled out of the timber.
• Well preserved fasteners are stored in a safe place for further use.
• Brackets for the old tissue is removed with a knife or a screwdriver and carefully remove the upholstery fabrics. (Later, it is useful for pattern patterns).

Attention! Leave bracket on upholstered furniture, cutting fabric, not worth it. Subsequent mounting of the new material would be quite uncomfortable due to the form of the sofa is completely spoiled.

In addition, rust appeared on the tissue, it is not decorate the new upholstery.

restoration of the frame

Old cushioning layer at the furniture should be replaced, because it is impossible to correct sagging areas. A laid additional layer is unlikely to remedy the situation, in problem areas deform it again. Wooden frame requires more careful handling. And all of spring and the mesh elements are replaced with new ones. If at the base of the sofa are belts, check their integrity and flexibility. Good their state allows the use of these details again.

Connecting the frame parts disassembled, cleaned and glued together again, but to achieve maximum results, the junction is fixed clamps. Once the glue dries, you can remove it. Unfit for further use shpaklyuyut socket or plug put therein, and a new hole drilled approximately 2 cm for a screw.

It is important that the irregularities, burrs and nicks carefully grind. If this is not done, the new upholstery can be damaged. Separate action to restore the former appearance shabby sofa or chair require special care and patience.

How to cut a new fabric?

fabric upholstery selected for erase and iron, which will prevent the subsequent operation for upholstered furniture creases and folds. When cutting the matter it is important to be especially careful leaving for attaching additional stock. Well, if the stock is large and in the process do not have to save every millimeter and tissue shortage will cause serious difficulties. Similar actions are carried out with the old upholstery: it is also to iron, then traced by the edge of the remnants of soap, and cut out.

The first step is fixed softening layer plywood with a special glue. Substance applied in small drops in the angular and central points. Necessary details are cut into prepared templates without allowances. As the glue dries upholstery fabric is attached by means of staples or small nails.

Next, the workpiece is turned and stretched fabric, wrinkles and folds are not allowed. Again padding is fixed by fasteners, departing angles of 5 cm. fabric and handled corners well secured.

Mounting design

To assemble properly upholstered furniture, it is important to study made in the process of dismantling the pictures. Before final assembly must be removed sofa wooden elements which are ground, varnish or paint. All work on the couch trim, seats are in the following order:

1. Setting the backrest.
2. Fixing the sidewalls, seats and cushions.
3. Mounting feet, handles, decorating elements.
4. Podshivanie rear panels and covers.

Please note that depending on the model of furniture assembly sequence can be changed. To avoid confusion, the time of purchase of the sofa assembly instructions stored. Strengthen the construction of the following steps can help: in the screw holes add any glue. This lineup lubricate all connecting elements.

Such furniture restoration, produced his own hands, it is fast enough. Completely renovated sofa will be an occasion for pride of the owner, while the interior is filled with fresh and bright colors. At the end of the article we offer watch video repair soft kitchen sofa.