Assembling a corner kitchen: how to assemble a corner kitchen to the scheme?

The room for cooking in house or apartment usually has two areas: working and dining. Each of them is equipped with appropriate furniture, which gather yourself the power of any man. For the kitchen the most comfortable arrangement of the desktop version of a corner of the vessel type with drawers. The assembly of the individual modules and installation of facilities in place is made on the instructions supplied with the kit or pattern.

basic information

This scheme comprises individual elements of the drawings, and the order of their connections with each other. Furniture corner to cover the total working area worktop, which combines together the modules together. It crash washing and hob gas or electric stove. In another embodiment, the household appliances can have its own housing, the upper plane of which coincides exactly with the desktop surface.

Fold this very design, with a detailed description, a relatively simple, and in addition it will save money on the services of specialists. Mount the kitchen corner, you can use the following set of tools:

• screwdriver set with meatballs;
• electric shock drill and drill for working wood and with pobeditovym tip;
• jigsaw with a set of nail files for CPD operation;
• Allen key to tighten the SCREW - furniture screws;
• level building and a set of plumbing tools.

Assembly kitchen cabinet angle type begins with the preparation of the workplace, where you want to remove all unnecessary items. Furniture parts, hardware and fittings are unpacked and distributed by modular elements. To work you're done and you're ready.

Mounting housing base

The order of assembly of kitchen units is shown schematically in the diagram, but experience shows that it is easier to proceed as follows:

1. The panel constituting the basis of an angular working zone, bolted Label details canopies.
2. On the side walls by means of self-tapping screws attach the slide, enabling the movement of boxes.
3. The drilled holes in the factory inserted wooden rails - dowels for strength, they are lubricated with joiner's glue.
4. In order to properly assemble the module, take the bottom, fasten it to leg and connect them to the side walls. When performing this operation should be closely monitored so that the dowels into the holes intended for them. Allen key is screwed into place SCREW.
5. The rear wall of the modules that make up the kitchen corner consists of the cut in the factory fiberboard sheets. The inner surface of typically painted white.

Tip: in the scope of delivery for fastening the rear wall provided little cloves, if they replace the screws, the design will be stronger.

the base assembly is now complete, all of the modules working angular surface mounted on the space provided for the instruction. Wiring sanitary appliance - sink must be prepared in advance: the pipe laid for cabinets that comprise a kitchen corner type. Connecting tubes and siphons are introduced into the module for subsequent joining with a mixer and discharge.

Installing countertops, sinks and sanitary fittings

Above the installed modules carry out length measurements of the working surface which is designed to combine all the elements into a unitary structure. In further assembling furniture set angular layout will be reduced to washing and inset hob if any in the hardware list. Worktop cut to length and causes marking for the installation bill stainless steel sinks.

In one of the points drilled hole into which the saw blade and is carried jigsaw figure cutout hole. During assembly kit for kitchen this operation is very crucial and in order to avoid damage to the coating, it is necessary to attract the assistant. Its task is to hold cut out fragment on weight and preventing it from falling.

In propyl inserted sink complete with fastening elements and a seal. The seat is pretreated with sealing compound based on silicone. Sink fixture attracted to the counter. This order of installation eliminates the possibility of leakage of water through the joint.

Before installing the countertop horizontal base is checked using a spirit level, the absence of biases to avoid inadvertent opening drawers.

In place worktop docking between themselves and with the end plate screwed to the protective aluminum profile. The other element is glued in place to the wall interface countertop, using the double-sided adhesive tape.

After that should be collected and inserted into the cell drawers, the next step is hanging and adjustment of doors. Now the corner kit is fully assembled and can be connected to home appliances, stove and sink. These operations are performed using bench tools: wrenches and movable keys. At this assembly furniture for the kitchen working area is complete, it remains only to bring order to remove debris.

(35 estimates mean: 4,63 of 5)

Loading...