Office space in the apartments do not differ over the area you want to use the most efficient. tall unitIn which the washing machine will be placed, is at the top of the door is closed compartment. They can be kept small in size housewares, appliances and other items. The lower part of the cabinet is also closed single- or double-leaf door.
Content
- Materials and tools
- preparation of elements
- assembly Procedure
Materials and tools
The standard kitchen set such modules are not provided, they are usually made to order for an individual project. If the room is already equipped with furniture, in the process of acquiring materials it should attend to the selection of identical facades and laminated chipboard. cabinet design is relatively simple, to give it the required strength in the assembly using special steel corners.
Cabinet for an automatic washing machine, built-in kitchen, is made in the home of the individual parts. Sawing module walls bought at a specialized area shopping center that sells building materials. Facades, furniture, awnings are selected from the products available in the store range in accordance with a pre-prepared list.
Automatic washing machine, which is closet to accommodate has standard dimensions. module fabrication is carried out using the following tools:
- electric drill with a set of drills;
- Drills Corded or cordless with the cue ball;
- screwdriving tool set;
- roulette, long steel ruler and a pencil.
Recommendation: at work should be followed in advance of the developed drawing. Dimensions in detail with graphic documents transfer with high accuracy.
preparation of elements
For the convenience of assembly operations at the initial stage it is necessary to do the layout and drilling the mounting holes. Big wardrobe for an automatic washing machine has hinged doors and drawers. On the side walls must be using a ruler and square to determine the place of fastening of canopies and mechanisms for moving boxes.
Compound parts together by special screws in upholstery: SCREW inner allen key. The field coupling elements are drilled holes with a diameter of 6 mm and a depth slightly greater than the length of the fastener. On the willingness of all module components to assembling them onto the appropriate place in the kitchen. Nearby removed all pieces of furniture that can interfere with work.
assembly Procedure
The final stage is the most difficult and responsible cabinet to install an automatic washing machine must be strong enough. The module has no bottom, and the unit is placed directly on the floor. The sequence of assembly operations:
- Set vertical sidewalls and using konfirmat connect them with covers and horizontal partitions.
- Mount the reinforcement wall at the bottom.
- Anchoring a rear wall made of colored chipboard, by means of screws and the screwdriver.
- Set in place the drawers, fasten and adjust the door.
Cabinet is assembled, it is left to move into place, insert the automatic washing machine and connect it to the water supply and sanitation.
The unit must stand horizontally, otherwise, it may shift during operation and touch the walls.
The module with the correct selection of materials and assembly quality, ideal for the kitchen design.
(42 estimates mean: 4,50 of 5)
Loading...
