Stackable chairs for the kitchen: the choice of model

In the cramped kitchen has to think carefully about the layout and choose a compact furniture that will make even a small space functional and convenient. But most of the usable area takes set and dining area - more precisely, chairs around the table. And even if all sitting is enough space during cleaning hostess furniture is very interfere, especially if it is nowhere to rearrange. And when the house is going to visit on a family holiday, the problem of their seating arrangements at all becomes acute. But there is a universal solution to both problems - is stackable chairs and stools. Let's see how they differ from other furniture.

Features

Current models apparently do not look less aesthetically pleasing than their classical counterparts, but they are designed so as to be able to lay down a few chairs in a compact stack. Tilt-foot, neat recesses in the seat corners - on these grounds stackable models are easy to find in a furniture store. They can buy a dozen or a dozen - stacked they occupy an area of ​​not more than one subject. The entire stack is easy to place in the corner, breaking it only just before dinner, or hold stock in the pantry (in the lodge) to get chairs for the guests arrival.

In addition to a special form of such furniture is still required and lightweight as raising and lowering it often have. By purchasing ergonomic model, be sure to weigh them in your hand - if you can quietly collect a stack of at least four subjects. You should also pay attention to the material of the seat and backrest - when folding the stack you at first will often touch their feet. Durable plastic coating or wood veneer must pass this test.

Please note: the majority of stackable chairs is no side-bar - frame with cross bars which give the whole frame rigidity. That is why the framework must be especially durable, nonstick slacking design.

In this regard, the legs themselves show well as a pair symmetrical framework or widely spaced support.

applied materials

practically used for the manufacture of stackable chairs, natural wood or soft padding - all due to the nature of their use and storage. From such furniture requires special reliability and durability, so there is need modern materials, where these characteristics are combined with low weight:

1. Reinforced polypropylene - not afraid of water and ultraviolet radiation, is resistant to aggressive chemicals, has a low density, but very durable. The service life of such constructions is 50 years old. This material is good and care: its perfectly smooth surface does not allow dirt to accumulate, and therefore can be easily cleaned with a damp cloth.
2. ABS-plastic - thermoplastic polymer is non-toxic, resistant to impacts, scratches, moisture, fat and chemical reagents. Its only drawback - fade under the influence of sunlight.
3. Polycarbonate - a non-combustible material able to maintain the shape and the basic characteristics in the temperature range of -40.. + 75 ° C. The service life of such furniture is not less than 25 years, even in difficult conditions. That's just to distinguish from cheap low-quality polycarbonate plastic visually impossible.

Much less common models of steel or aluminum, and wood products. The first need of corrosion protection, so covered with polymer paint, giving the metal a more cozy and homey look. Wood is not used in its pure form - is often plywood, covered with veneer. Here from it and determines how persistent will chair the adverse conditions of the kitchen. It needs a solid slice of oak, beech, pine or birch, which is not so easy to scratch the careless movement.

Popular designs

Stackable chairs model declared loudly about themselves even 90 years ago. Since then, furniture designers have offered many worthy options - ergonomic and stylish. There are real masterpieces.

Panton

One of the most famous examples of stackable chairs is a design model Panton Chair. Elegant S-shaped silhouette lends the interior a modern kitchen unique style, thus allowing to collect in a pile just 4 subjects. Panton chairs made of dyed ABS-plastic, for loads up to 120 kg. Traditionally they are made self-colored, but the kitchen can pick up a set of multiple colors. There are also clear models that fit perfectly in any modern design. And although the 60-ies of the last century, Panton Chair design has not changed, they are still in vogue.

Hi-Cut

But the relatively new 2008 model of the Italian producers, stand out bright design. Polycarbonate chairs themselves are not too different from the classics - except that several shorter back. Primary colors, too little: white, black and transparent. But the highlight of steel bright decorative strip with a reflective effect on the upper edge - in the dark room fairly weak light beam, so that they "lit" red, orange, blue or green. Keep in mind - the height of the chair seat Hi-Cut is typically less than 44 cm, while the adult is considered to be the best indicator of 45-50 cm.

Breda

The Danish model is a stackable chair attracts attention not only bends the plastic seat, combined with the back, as trapezoidal frames legs. They certainly will not scratch the body, because all the corners are rounded on them, while they themselves have a bearing rubber pads. The manufacturer offers a fairly limited choice of colors and surface effects (transparent and opaque). The main colors: orange, black and gray, but are made to order and other options Breda model.

Offers from IKEA

This company is known for its orientation towards beautiful and comfortable interiors, regardless of property size. That's Kitchen Ikea offers several interesting options stackable chairs that will save not only the usable area, but the money for their owners.

Elmer

The original model of the frame of chromed steel

Combined with the back rest made of polycarbonate has a rounded shape that provides extra comfort when sitting. In addition, in its upper part a slot for which is convenient stackable chair lift with one hand. The seat has passed a special surface hardening, prevents accidental scratches. The main colors: white, translucent and red.

Wilmar

A large family of chairs from Ikea

One line of them combined chrome legs, as well as an unusual form of the backrest and the seat with lateral recesses. The rest of Wilmar models pleasantly surprise with variety of designs. Where you can find products from birch or oak veneer plywood, opened a light varnish, bright back with durable melamine layer and the black-and-white graphics. The only disadvantage of these chairs can be called the open edge, which shows all the compressed layers of veneer, but the model for 2000 rubles is not too serious drawback.

Leif-Arne

Elegant version Wilmar

It is not just chairs and elegant kitchen chairs with laconic armrests in the rubber sheath. Silhouette of the backrest and seat is very similar to the above model, but registration Leif-Arne has turned much more elegant. For the production of these chairs is used reinforced polypropylene blue or white color, which allows for smooth and accurate bends rounded edges. Legs adjustable chairs are additionally provided with inserts that provide structure stability on all surfaces.

Jan-Inge

Bright chairs made of reinforced polypropylene

In fact it looks more like painted wood, and designed to resemble the Italian model Grace designer Samuel Wilkinson. However, the furniture from Ikea wider and comfortable backrest and seat, as opposed to "Grace" does not make overwhelm ago. Chair Jan-Inge withstand weight up to 110 kg and, in the opinion of owners, is very stable and kindness for plastic. This is not surprising - after producer initially positioned its models like furniture for cafes. At the same time the weight they have is small - only 4.75 kg. Primary colors: yellow, white and light gray. For an additional 500 rubles, you can buy the same design with neat arms that turn stackable chair in the chair.

Tunholmen

Garden aluminum chair with unusual silhouette

Corrosion resistant metal is additionally protected by powder coating is dark gray, so that it can be stored on a veranda or balcony open. On the back bending, rolling in the back, provided with two drainage holes. Thanks to them, the rainwater does not accumulate on the surface, but immediately flows down, if you forgot to remove the chair from the yard. Polyamide plastic feet are not afraid of the vagaries of weather, but their wide formulation is unlikely to be used in close Tunholmen kitchen.

Reidar

Another compact model garden

Simple and sleek design of these stackable chairs made of aluminum complements the matt powder-coated black or white. you can put this furniture in the kitchen, and then fold the stack and remove the balcony. Reidar turned out really versatile, and it belongs to the family garden is not evident. In addition, these models proved to be very light - only 4 kg, so that the movement, and stacking problems will not arise.

We looked at a lot of designs of stackable chairs and armchairs that can fit well into the kitchen interior, and will not take up much space. You will be left only to choose the right shape and color. But do not forget to check before buying such furniture for durability - because of the design features of it requires a very high reliability and stability.