Stools for the kitchen: wooden stools with their hands

Stools for the kitchen can be very handy. They do not take up as much space as regular chairs, it fits easily under a desk, freeing up the space around it, and always help out, if you suddenly descended on the guests. Buying a large number of stools can be costly, but made their own hands, these pieces of furniture will not only save the family budget, but also decorate the home cooking.

laminated chipboard

With the help of pressed plates and a small set of tools, you can easily, and most importantly - quickly make their own hands a set of comfortable stools. To work need:

1. Sheet boards and plywood decorative cover 12-14 mm thick.
2. Furniture edge suitable width.
3. Upholstery fabric - for the kitchen is better to use artificial skin;
4. Foam thickness of 8-10 cm.
5. Jigsaw.
6. Staple gun or hammer and nails with decorative caps.
7. Screwdriver, screwdriver and better.
8. Iron and grinding bar.
9. Glue, screws galvanized.

It is necessary to draw on the paper pattern for a pair of solid side legs (they can make curly or perform as a simple rectangle), and the jumper, which will give additional structure rigidity. All three elements are cut from a sheet of chipboard jigsaws and 30x30 cm seat - of a more solid plywood. kitchen stool assembly is performed via screws: 2 on each side of the legs for fixing the stiffeners, and 4 fixed seat made of plywood on the finished frame.

After this will only elevate the stool, made with his own hands. Using a heated iron on polished ends glued furniture chipboard edge. Without pressing in the kitchen rapidly fed with moisture, it begins to warp and rot. Plywood seat paste is not necessary - it ends hide upholstery. But before you execute it, on top of the stool is glued "cushion" of foam. Only then it is possible to carve out a section of the desired shape fabric, wrap it with a small seat and fix the interference: clamps on the reverse side or plywood decorative nails on boards.

Wood

Wooden stools are more reliable, although the production of their own hands a little more complicated than in the case of the CPD. Nevertheless, carefully produced and decorated of solid wood furniture can not only do a good job for their owners, but also to decorate the kitchen.

To work need the same tools as in the case of the plate, plus sanders (belt and angle). And here is a set of materials has to be different:

1. Bars or carved balusters for stairs instead of the legs. The length of each is typically 43 cm, but it all depends on the purpose of the stool.
2. Planed boards or slats section 30x30 mm for side-bar;
3. Another seat board (can take a ready inlaid shield).

To wooden seat was safe and had a neat appearance, downed shield made of boards carefully polished, and the corners are rounded with a radius of about 5 cm. On the lower side is done by counting mounting legs with a space from the edge of 3 cm. stool frame for the kitchen with his hands going from a prepared and polished timber - here you need to make sure that the length of all four feet was similar to the millimeter.

Fixing the seat supports may be performed using dowels furniture, if you want to maintain the integrity of the wooden surface. For this purpose, the ends of the bars and seat marking drill deepening the required diameter, cut to size and pushed onto the wooden dowels, plastered their joiner's glue or PVA. Easier and perform assembly on furniture screws faster. For this purpose, the seat drill-holes (better to do it with the front of the panel), and then simply screwed screws so that they went into the center of each end of the legs. Both options have their place, but hidden fasteners are preferable.

Ways to harden the stool design for the kitchen and give it rigidity also missing. "Factory" version of tongue and groove to insert rungs side-bar with your hands to implement difficult - it requires a professional tool. But it is possible to resort to simpler methods.

Connect corners

Most satisfied if dialed from the side-bar boards 50-70 mm wide and is secured directly under the seat. In doing so, the legs have a sufficiently large thickness - so metal corner shelf will not look out over the edge. More convenient to work, turning the stool. Stretches of the board to ensure rigidity, are inserted between the legs so as to form with their outer faces of a single plane. Then they fastened from the inside with short screws through the corner of the bar.

Fixing screws

There simply screwed to the rack the legs of the kitchen stool hardware. In this case, a solid frame should not be. The rungs are installed on each side at a distance of 5 cm from the seat, and the front and rear - 2 cm below. Since the screws are not "meet" in solid wood and will not weaken the structure.

The finished design is carefully polished, and then carried out the decoration. If a wooden stool, the most logical to him to paint or varnish to reveal toned to emphasize the texture. But you can go ahead and decorate with hand made painted furniture or pictures in decoupage technique.

How to make a folding stool

This design is so mobile and easy to use, that it is often taken to the country, picnic or fishing. However, for use on the street is more suitable option from a light and strong metal tubes. But if the stools, it is quite possible to use the house as an extra seat when going to a lot of guests. It will not fall out of the picture kitchen interior, and after a holiday leave for storage in the pantry or on the mezzanine.

Used for the frame are the same bars, but to foldable worked as it should have first build a drawing, which will be calculated by the optimal length of the legs, and their location the form. Own feet is a rectangle, the upper bridge which will form the basis for the seat. In this case, one frame can be smaller than the other, so that when folded tightly to enter into it, or be made of the same size. frame assembly is done with the help of furniture screws.

On the lateral legs at or just above the marking is performed by a cross-shaped connection frames. After drilling the holes, these points are bolts and nuts (like scissors). Firmly tighten the fasteners is not necessary that the product freely develop.

Folding Seats kitchen stool made of a very durable and hard tissue, and for the reliability of its tailor and fastened in the following order:

• Measure the distance between the open beams and multiply that number by two.
• Add the total perimeter of the beams, which will go around the web - this is the length of the fabric strip.
• Future Seat width is selected by the frame size, plus centimeter on each side at the hem edges, if necessary.
• A cut strip of fabric to lay on the crossbar of the collapsible frame and the free end of a skip them.
• Sew web ring and shoot stapler to one of the bars.

By making the stool with his hands Kitchen, clearly defines the purpose for which you need this item. If this is only a compact replacement of chairs in the dining area, the seat is better to make a mild to it was comfortable. Often, instead of using a stool ladder - Make a strong and rigid structure made of wood with a solid surface. Neither one nor the other option will not take much of your time.

A variety of ready-made models

If you still buy stools for the kitchen seems to be easier, you need to decide with their designs, materials and design. They may have hard or soft seat padding (the second option is designed for continuous use), vary in shape and height.

Manufacturers of furniture stools are made from the same materials as the classic chairs, so find a suitable to the interior and the entire dining group model is not difficult:

Robust design of chrome or painted steel possess admirable stability. When choosing a high stool to the bar table should look at it in such models with soft and ergonomic plastic seat. But pay attention to the weight of the furniture - hard stools will be hard to be moved from place to place.

wooden

A huge group of stools of all shapes, designs and sizes. If desired, a good solid wood furniture can be made with your own hands. But in the kitchen she would need a reliable protection, since the variable indoor humidity leads to deformation and cracking of the wood. These stools have to be painted or at least lacquering - and they may have to finish refresh every few years. The rest is very durable furniture characterized aesthetic appearance.

Chipboard and plywood

Cheap models can look quite aesthetically pleasing, if their surface laminated decorative film, and the seats are covered with beautiful and durable fabric with internal padding. Making such a stool for the kitchen with his hands, too simple and require minimal financial costs. Especially intricate shapes they are certainly not pridash, but as a budget option or temporary furniture made of particleboard has a right to exist.

Plastic

In its pure form, this material can only be used in the production of foldable, collapsible and stackable stools - that is where you need to minimize the weight of the furniture. Much more plastic is used as an additional element, for example, to create the original form seats. Best of all it looks in combination with a metal base.

If the kitchen stools sold separately from the rest of the furniture, the material for their manufacture is selected in accordance with the already present elements of the interior. But first of all new things should go well with the dining table.

In addition to standard stools today there are other options for designs, modern and more convenient to use:

1. Folding - compact models, which at any moment can be folded and put away in the pantry, if not hang on the hooks. When choosing such furniture, special attention should be paid to the reliability of the layout mechanism, since it depends on the durability of stools themselves.
2. Bar - high model on which to sit comfortably at the desk. Here, as in the case of the "strapping" chairs must exist special footrest at a distance of about 50 cm from the seat. Particular attention should also be paid to the stability of bar stools, as the center of gravity of them is quite high.
3. Stackable - resistant kitchen stools, freely placed within a vertical stack. From the usual differ only in a small area of ​​seats and form a slightly splayed legs that do not interfere with stacking.
4. Collapsible - a relatively new kind of furniture. Quickly decomposed into individual elements and can be compactly stored in one of the drawers. As a rule, made of metal or durable plastic.

The choice of design for the kitchen stool varies with the operating and storage options of additional furniture. If the dimensions of the room are small, traditional models have to give up in favor of a more ergonomic folding or stackable designs. By the way, for a small area is better to use stools with seats round shape, leaving a square for spacious kitchens.