Setting the refrigerator: Can I put it the microwave and flowers?

Installing a refrigerator or other cooling devices (BHP - household refrigerating appliances), Despite its apparent simplicity and ease of use, yet requires compliance with certain conditions, qualitatively determine the further proper operation of equipment. Therefore, in the instructions accompanying the refrigeration, registered number series composed of items that allow these conditions to comply with. Equally important are BHP transport rules. To learn where and how to install refrigerator, read on.

Transportation and unpacking

It is desirable that the transportation made by representatives of the company or shop, where you have acquired the unit, as they will make it professionally and safely. In the case of self-transport would be wise to check the operating state of the refrigerator in place and require the seller to fill in the accompanying documents and warranty card.

It is important to remember that the refrigerator can not be transported lying down, strike or shake, as you can cause serious damage to the device (damage to the body, parts of deformation, leakage of refrigerant).

After delivery, unpack the refrigerator, carefully remove the packing material and save it. This is necessary to ensure that when it detects any flaws you could return the refrigerator back. It is also necessary to have all their documentation. According to the instructions, check package in the event of non-compliance inform delivery service or an organization to implement a refrigerator.

Installation and connection of the refrigerator

How to install the refrigerator right? First, make sure it is not damaged on the surface should be no dents, chips and scratches. Remove dust from the surface of the appliance and the rear wall and the obstructions (e.g., packaging residues). Perform installation of all parts of the device that was included according to the model.

Adjust with the feet cooler heightHe has to stand in the kitchen on a flat surface to avoid unnecessary vibration and outages. In addition, the device should be placed so that it has a small angle of inclination ago. This is to ensure that the door closes under its own weight and the outflow of meltwater in the tank mounted on the back wall of the bottom. What else is important to install the refrigerator in the kitchen has been carried out correctly?

It's worth noting that the refrigerator at the time of inclusion in the network must be the same temperature as the room temperature, where it is connected, so it has previously it to stand in the kitchen 2-3 hours. Before connecting the device to a power source, ensure that the mains voltage corresponds to the recommended to use the appliance.

Provide continuous power, as BHP some firms, as a rule, Western, are very sensitive to voltage drops, and this can damage the appliance. Information about the valid options refrigerator works manufacturer usually puts on the back panel of the device itself. The best option would be the use of domestic transformer, which will help to achieve the desired voltage.

Check the cord serviceability and sockets. Ensure that the cables do not exert an insulating layer and is not damaged on the surface, that Fork also OK, and then turn on the refrigerator in the socket and set the temperature controller to the middle position.

Before you start to use the fridge in full force, let it run for 3-4 hours, then check the temperature and make sure that the refrigerator and freezer are working properly. At the same time pay attention to the sound of the instrument, it must be quiet without the characteristic clicks and crackles.

Most modern refrigerators tend to operate silently, and the moment of "sleep-wake" the device can be identified by the LEDs on the front panel of the refrigerator. Some models also have audio indicators.

In reading the instructions attached to the refrigerator, carefully read the rules of the cooling, freezing and storage of products. This will prevent food spoilage and unpleasant odor in the refrigerator.

Location for the refrigerator

Where you can put a refrigerator in the kitchen? Location for the refrigerator in the kitchen - this is an important point that requires attention, and it applies a set of rules.

The device must not be exposed to direct sunlight, it is best to put it in a ventilated and dry food away from heaters. Between the walls of the refrigerator and the wall boundary of another appliance or furniture must be a free space (at least 5 cm in the cold season and 10 centimeters in the warm season). This is necessary for the free circulation of air and protecting from overheating and breakage, as well as premature corrosion of metal parts of the refrigerator.

The door of the refrigerator should be freely opened and closed, it needs to ensure adequate space, and it should not be overloaded with products in order to avoid skewing and disruptions.

Whatever the layout of the room, it is not recommended to place the unit in the immediate vicinity of the sink or stove. Ideally, these three objects should form the corners of an imaginary triangle. If the kitchen is small and choices of where you can put a refrigerator, a little bit, then separate it from the stove or sink at least one or two closets.

If during transportation or improper installation were your fault damage, the instructions are provided contact details of service centers, in which you can turn for help. Self-repair is not recommended due to violation of rules set forth in the warranty card. Damages another character is eliminated by the manufacturer. Proper conduct installation works will provide a long trouble-free operation of the refrigerator and your safety.

important nuances

Can I put a microwave in the refrigerator? If the microwave oven can be found elsewhere, it is better not to do so. Since the technical documentation rules to set the microwave for BHP prohibited. It so happens that it is compulsory, and in this case, use some of the recommendations:

• Make sure that around the microwave there is sufficient space for the outflow of air and the furnace does not abut against the cabinets;
• put between the wooden support devices;
• do not put the microwave to the fridge, if you use it often and for a long time;
• the use of microwave ovens to be comfortable.

Can I put the flowers in the refrigerator? Knowledgeable fans of indoor plants do not advise to do it, because it is not the best place for good growth and plant health. The reasons for this lack of fresh air and exposed to a magnetic field appliance.