Built-in hob: how to choose a built-in gas stove?

Gradually built a gas hob in the kitchen replaces the conservative interiors, habitual and bulky stationary plate. This is due to a significant improvement, as the design and functional component of modern models. About how to choose a stove, read on.

The main types of

The analysis of consumer feedback shows that very quickly gaining popularity built cooking gas panel, Are not only cost-effective option, but graceful elegant interiors element. They are structural features are divided into two major kinds, each of which has its basic dignity.

1. The independent model is attractive for its mobility, which allows to place it in virtually any convenient place for the hostess. The oven in this case can also be acquired from the discharge autonomous devices and installed at its own discretion or absent.
2. Dependent modification panel has a common control with oven and mounted only in the tandem. Both items are purchased most often a single set. If it becomes necessary to replace, such as the oven, it should choose from the range of a single manufacturer.

The panels may have different management principle:

• mechanical;
• sensory.

Different embedded gas cooktops type and dimensions of the burners.

• Grill - grill on the hob, used for cooking over an open fire of vegetables, fish or meat.
• Double crown - flame species in the form of two circles formed due unary spargers.
• Triple Crown - is considered the most cost-effective, since the three fiery circle, created a double divider, very quickly heated preparing foods.

Cast iron burner Coup de feu, is heated from below by fire, it is an excellent device for cooking a variety of sauces and when extinguishing. Usually it is in addition to the large-size panels, installed in the kitchens of cafes, restaurants, canteens.

dignity

Hob discharge of built-in models, functioning on gas, including balloon refers to variants home, having an extensive list of advantages:

• compactness;
• efficiency;
• rapid heating;
• elegant appearance;
• ease of use;
• installation availability.

Location Embedded panel

To the kitchen space in the projected choose the right place for installation of modern hob, you should know the standard dimensions of these products, depending on the number of heating elements. In normal depth of ≈ 60 cm, the width (in cm) ranges as follows:

• double stove model - 30-32;
• three burners - ≈ 45;
• four burners - ≈ 60.

There are panels of 90-centimeter-width, which is located five and even more burners. Such models are used less frequently because they require fairly spacious kitchens, which is important for private cottages. mains gas connection is not a prerequisite, since many models of panels adapted to work on bottled gas.

selection of material

Knowledge of the characteristics of the material used for the production of user-friendly and practical panels, is one of the key criteria in order to choose the best option.

• Elegant glass ceramics often become style-forming element, thanks to the wonderful decor. This material results in a good operating power hob functioning of the gas, often a balloon, if it is a private house or hut. There are extended oval heated area suitable for non-standard dishes. Excellent surface smoothness facilitates the maintenance of all the planes built slab. But should be wary of contact with the hot surface material, which is composed of sugar. In such cases, you need to quickly clean the contamination. Despite the good strength properties, glass is sensitive to sudden shock loads, particularly the nature of the point.
• Enamelled steel attracts low cost, but it is fragile and is quite difficult to clean.
• Stainless steel strength and status pleasing appearance, but it is difficult to contain in a perfect form, as in any similar surface visible droplets. When cleaning can not use steel wool, abrasives and corrosive chemicals.
• Tempered glass brings to interior mystique and nobility of Germany. Material surprisingly durable, but it needs constant care in the form of polishing, so it does not lose its stunning decor.

functionality

Adding to all the great improvements in such an important subject as the interior of the kitchen hob extends their functionality, making it convenient and safe to use. Among them are the following important options:

• Gas - control - providing immediate shut off the gas in case of flame attenuation;
• protection of children;
• electric ignition gas pressing or in parallel with the gas supply by turning the handle.

Among the variety of models is easy to choose products with nozzles adapted for use bottled gas, which is natural, since the line pressure is lower.

Accessories for panels

Rather expensive additional protection is hob cover material which is identical to basic types, that is, it may be ceramic, glass, or made of enameled become.

Become a convenient supplement grating (steel, cast iron), which is convenient to put the dishes. Among the variety of sizes, you can choose not only whole products but also components that facilitate care for the surface during cooking.

It is noted that due to the roughness of the iron gets dirty and difficult to clean than the enameled metal.

design panel

The color palette is inherent in the modern kitchen fire, gradually expanding, getting comfortable for buyers color palette, which facilitates the selection of variations of a specific image interior. Particularly attractive is the brilliant glass ceramics, their impeccable views of ennobling the space around them.

The criterion is often the achievement matches the background color panel with an apron or with worktop, although expressive effect can be achieved by competent formation of the original contrast. Noble steel shade perfectly matched with different color solutions, muting extremely bright and making expressive pastel shades.

Enamelled perfect support plane snowy white headsets blended in an inconspicuous, aristokraticheski restrained wooden tabletop.

For dynamic high-tech style is advisable to choose the panel to the effect of "metallic" and achromatic white or black glass-ceramic model. Enamelled modifications reinforced cast iron hobs underlined ageless charm classics.

The possibility of using a convenient pane in suburban environment where it operates most of the bottled gas, under pressure, significantly widens the scope for its popularity.

The sequence of fixing the worktop

Installing the panels is available for self-fulfillment. Its dimensions are specified in the technical documentation. According to them is carried out on the table layout, considering that the gap is optimal can not be more than two millimeters. You can then proceed to perform successive operations.

1. Drilled thin drill holes in the corners of the marked rectangle for the jigsaw blade.
2. Using established denticulate sawing cut hole.
3. The resulting joint glued grommet or use silicone sealant.
4. Now the panel is placed in the recess and is fixed with special clamps.

A gas hob set built in a similar pattern, but should be ≥ 55 mm distance between it and the wall. If the kit does not include the jets needed for bottled gas, you should select them separately, get expert advice. After the nozzles are screwed is fixed area, for feeding desired gas into the system.

When special panel tabs fixed in the hole bottom by countertop steel corrugated hose certified gas service, it connects to the pipe. Independently carry out these works is prohibited, it is the responsibility of employees of the gas company.