The location of the heated towel rail in the bathroom (photo)

A heated towel rail is a convenient device that allows towels to always remain dry and prevents the formation of mold and mildew in such a humid room as a bathroom. But how to choose the location of the heated towel rail in the interior of the bathroom? Photos with various types of construction of this device, optimal placement options, as well as recommendations for installing a heated towel rail, can be found below.

Water towel dryer

In older houses, a heated towel rail in the bathroom is usually already installed. It is embedded in the heating system and looks like a snake. This is the most common design. If it is not in your apartment, then you can install it yourself.

The simplest design is U-shaped. She has only one rounding, and this option is easiest to connect to the pipes.

The modern version of the dryer is a “ladder”. It consists of two pipes connected by crossbars on which towels can be hung.

Some manufacturers offer designer products of an unusual shape. They fulfill their direct function, and also serve as decoration of the interior of the bathroom. These designs are well suited to the styles of loft, high-tech or constructivism. But they require a competent connection to the water supply, not every master will cope with this.

All water heated towel rails work on the same principle. They are connected to a heating system or hot water supply. The first option has an obvious minus: towels will be dried only in winter during the heating season.

The shape of the device is selected by the area of ​​the bathroom and by design. Since this appliance heats the room, do not buy too large a product for a small room. Judging by the reviews, they most often establish the form of a "snake" or "ladder".

Electric heated towel rail

Electric varieties of towel dryers are easier to install than water. They simply need to be plugged in if necessary. But there is a minus - they are additional consumers of electricity. Electrical structures are available in the same forms as water. Most often they buy a “ladder”, as it fits equally well in any interior.

There are two types of devices for internal filler:

• cable;
• liquid.

The former are cheaper; they are made of stainless steel or copper. They are easier to hang, as you can choose any location, even diagonally.

The advantage of liquid modifications is that they slowly heat up and cool down. But they have requirements for quality and installation method. The design must be airtight, it can be hung on the wall only vertically, since the heater is attached from below.

Almost all electric dryers have a shutdown timer when a certain temperature is reached. In some models, the degree of heating can be adjusted.

Location options

When apartment residents make repairs, the question often arises: where to hang the heated towel rail in the bathroom. It is impossible to answer unequivocally, everyone chooses a convenient position.

If you embed a water version of the device in a heating or water supply system, then you need to focus on the pipes. Usually they are located opposite each other. Most often, near the water pipes are a bathtub and sink. Hanging a towel dryer above them is not very convenient, but some do.

If you have to connect a water dryer to the heating pipes, then usually this is done in front of the bath. The most convenient arrangement of towels is above the washing machine. That is how it is located in most modern apartments.

One of the most unsuccessful location options will be the installation of the device over the toilet in the combined bathroom. The minus is obvious: from careless movement of the towel can slip into the toilet.

Another unsuccessful place will be the space above the bathroom. Splashes of water will fly onto the towels, and the design will not be able to fully perform its functions.

When choosing a water towel rail installation scheme, in addition to convenience, it is necessary to take into account the pressure of the water in the system. If you take it far from the riser, the pressure may not be enough, then the structure will not heat up.

Towel rail mounting in accordance with standards

There are standards for installing water heated towel rails:

• The diameter of the main pipeline should not be larger than the diameter of the device.
• The distance from the wall to the center of the pipe should be 3.5–5.5 cm.
• The heated towel rail is attached to the wall on the brackets.
• The connection to the pipe is via couplings.
• The coolant must move strictly from top to bottom.
• Height to the floor according to the standards - 120 cm. The minimum allowable height is 95 cm.
• The distance from other objects is 60 cm.

Depending on the type of heated towel rail, before buying and installing, you need to consult with a plumber or electrician serving your home. They will tell you what requirements the device must meet in order not to harm the house communications.

Installation of a water heated towel rail

After you have chosen a place where to hang a heated towel rail, you must proceed with installation to the water supply system.

1. Shut off hot water.
2. Weld the threads to the pipes.
3. Solder fittings to pipes.
4. Install the brackets on the wall.
5. Install a heated towel rail.
6. Start up the water and check the system for leaks.

In some cases, a bypass is installed. This is a workaround for water if there is no access to the dryer. For its installation in places of fastening of pipes and a heated towel rail cut valves. They are connected to a pipe with another valve. It shuts off water bypass in normal operation.

Many are interested in whether a heated towel rail can be mounted in a heating system. Of course, this can be done, but many apartment owners who chose this method regretted it, because the structure in this case only heats up during the heating season. Therefore, inserting a heated towel rail into hot water pipes is the best option.

When planning the location of the towel dryer, you must consider the size of the room and the layout of the plumbing. On the Internet you can find photos of heated towel rails in the interior of the bathroom. But it is best to develop your own plan, which is suitable for a particular apartment. At the same time, the wishes of all residents are taken into account. You also need to calculate which design will be the most economical in a particular house.