Types of skirting boards for stretch ceiling
If we consider the types of skirting that are suitable for stretch ceiling, then we can distinguish two: polystyrene and polyurethane. The first is simple and convenient for installation, besides, inexpensive. Its major drawback is fragility and inflexibility. It can quickly break down under the influence of some solvents. Therefore, the glue for its fastening is carefully selected. The composition Titan is suitable, it is intended for these purposes. In some cases, a special putty is used.
Polyurethane skirting board is more flexible and durable. But, at the same time, and expensive( in any case, more expensive than the previous one).An important advantage is that it is easily applied in those cases when rounded edges are needed, that is, it is very easy to bend.
Plus, it can be mounted on a much larger number of adhesives, since it is less susceptible to all kinds of destruction. The drawback of this material is its overall dimensions. Over time, it can bend under its own weight, cracks or gaps between the coating or the wall are formed, which is not very beautiful.
Skirting technology for stretch ceilings
After the ceiling has been installed, proceed to the installation of skirting boards. It can be carried out by in two ways: on putty before wallpapering and on glue. Better, of course, the first method, since it has a number of advantages. All the resulting cracks later can be sealed with the same putty. And the wallpaper can be easily adjusted to fit the ceiling skirting. The resulting result will pleasantly surprise you.
However, if the wallpaper is already applied, simply check that the substrate is clean and dry and use the second method. It is necessary to select a good adhesive for this purpose, for example Moment Editing. The resulting cracks can be covered with the same composition.
When using this method, it is always worth remembering that an improperly connected skirting board can damage the entire coating, because if you want to dismantle it, the ceiling fabric itself can stretch.
To protect the coating from the adhesives on it, polyethylene is used. Next, using the tape measure the amount of necessary skirting and cut it with a hacksaw. Start work from the corner. Take the fillet and fix it to the wall( or glue, or putty).Moreover, the corners are decorated with special "corners".If they are not available, then cut them yourself at an angle of 45 degrees. The next plinth is glued to the back.
A few words about care of the ceiling and skirting boards
The process of care for this surface is simple enough. You just need to remove the emerging pollution. As a rule, this procedure is done once in 3 years. In this case, a typical Mr. Muscle for windows can be used as a detergent. In the case where the coating does not have strong contaminants, it is sufficient to wipe it with a damp rag.
Warning! Do not use acetone-containing mixtures when cleaning this coating. This can lead to loss of appearance. When serious stains appear, they can be eliminated with alcohol or white spirit.
If, for some reason, the surface of the ceiling is damaged( torn), then you need to fix this space with tape or tape so that the hole does not expand. If this defect is in an unobtrusive place, then it can be repaired( make a neat patch).But for this it is better to invite professionals who performed the initial installation of the coating.